426 Technical data
Fuels, coolants, lubricants, etc.
Premium unleaded gasolineFuel requirements
Only use premium unleaded fuel:
The octane number (posted at the
pump) must be 91 min. It is an average
of both the Research Octane Number
(RON) and the Motor Octane Number
(MON): (RON+MON)/2. This is also
known as the ANTI-KNOCK INDEX.
Unleaded gasoline containing oxygenates
such as ethanol, IPA, IBA and TBA can be
used provided the ratio of any one of these
oxygenates to gasoline does not
exceed 10%; MTBE must not exceed 15%.
The ratio of methanol to gasoline must not
exceed 3% plus additional cosolvents.
Using mixtures of ethanol and methanol is
not allowed. Gasohol, which contains 10%
ethanol and 90% unleaded gasoline, can
be used.
These blends must also meet all other fuel
requirements, such as resistance to spark
knock, boiling range, vapor pressure, etc.Warning!G
Gasoline is highly flammable and poisonous.
It burns violently and can cause serious
personal injury.
Never allow sparks, flame or smoking
materials near gasoline!
Turn off the engine before refueling.
Whenever you are around gasoline, avoid
inhaling fumes and skin or clothing contact,
extinguish all smoking materials.
Direct skin contact with fuels and the
inhalation of fuel vapors are damaging to
your health.
!To maintain the engine’s durability and
performance, premium unleaded gasoline must
be used. If premium unleaded gasoline is not
available and low octane fuel is used, follow
these precautions:
Have the fuel tank only partially filled with
unleaded regular gasoline and fill up with
premium unleaded gasoline as soon as
possible.
Avoid full throttle driving and abrupt
acceleration.
Do not exceed an engine speed of 3 000 rpm
if the vehicle is loaded with a light load such
as two persons and no luggage.
Do not exceed 2/3 of maximum accelerator
pedal position if the vehicle is fully loaded or
operating in mountainous terrain.
427 Technical data
Fuels, coolants, lubricants, etc.
Gasoline additives
A major concern among engine
manufacturers is carbon build-up caused
by gasoline. Mercedes-Benz recommends
only the use of quality gasoline containing
additives that prevent the build-up of car-
bon deposits.
After an extended period of using fuels
without such additives, carbon deposits
can build up, especially on the intake
valves and in the combustion area, leading
to engine performance problems such as:
Warm-up hesitation
Unstable idle
Knocking/pinging
Misfire
Power lossIn areas where carbon deposits may be
encountered due to lack of availability of
gasolines which contain these additives,
Mercedes-Benz recommends the use of
additives approved by us for use on
Mercedes-Benz vehicles. Refer to the
Factory Approved Service Products
pamphlet (USA only) or contact an autho-
rized Mercedes-Benz Light Truck Center
for a listing of approved product(s). Follow
directions on product label.
Do not blend other fuel additives with fuel.
This only results in unnecessary cost and
may be harmful to the engine operation.
Coolants
The engine coolant is a mixture of water
and anticorrosion/antifreeze, which
provides:
Corrosion protection
Freeze protection
Boiling protection (by increasing the
boiling point)
The cooling system was filled at the factory
with a coolant providing freeze protection
to approximately -35°F (-37°C) and corro-
sion protection.
If the antifreeze mixture is effective to
-35°F (-37°C), the boiling point of the cool-
ant in the pressurized cooling system is
reached at approximately 266°F (130°C).
!Damage or malfunction resulting from poor
fuel quality or from blending additional fuel
additives other than those tested and approved
by us for use on Mercedes-Benz vehicles are not
covered by the Mercedes-Benz Limited
Warranty.! Add premixed coolant solution only. Adding
water and MB 325.0 Anticorrosion/Antifreeze
separately from each other, could cause engine
damage not covered by the Mercedes-Benz
Limited Warranty.
428 Technical data
Fuels, coolants, lubricants, etc.
The coolant solution must be used year
round to provide the necessary corrosion
protection and increase boil-over protec-
tion. Refer to Maintenance Booklet for
replacement interval.
Coolant system design and coolant used
determine the replacement interval. The
replacement interval published in the
Maintenance Booklet is only applicable if
MB 325.0 Anticorrosion/Antifreeze
solution or other Mercedes-Bent approved
products of equal specification are used to
renew the coolant concentration or bring it
back up to the proper level.
For information on other Mercedes-Benz
approved products of equal specification,
refer to the Factory Approved Service
Products pamphlet (USA only) or contact
an authorized Mercedes-Benz Light Truck
Center.To provide important corrosion protection,
the solution must be at least
50% anticorrosion/antifreeze (equivalent
to freeze protection to approximately
-35°F [-37°C]). If you use a solution that is
more than 55% anticorrosion/antifreeze
(freeze protection to approximately
-49°F [-45°C]), the engine temperature
will increase due to the lower heat transfer
capability of the solution. Therefore,
do not use more than this amount of
anticorrosion/antifreeze.
If the coolant level is low, water and
MB 325.0 Anticorrosion/Antifreeze
should be used to bring it up to the proper
level (have cooling system checked for
signs of leakage). Please make sure the
mixture is in accordance with label
instructions.
The water in the cooling system must meet
minimum requirements, which are usually
satisfied by normal drinking water. If you
are not sure about the water quality,
contact an authorized Mercedes-Benz
Light Truck Center.Anticorrosion/antifreeze
Your vehicle contains a number of
aluminum parts. The use of aluminum
components in motor vehicle engines
necessitates that anticorrosion/antifreeze
coolant used in such engines be
specifically formulated to protect the
aluminum parts. Failure to use such
anticorrosion/antifreeze coolant will
result in a significantly shortened service
life.
Therefore, the following product is strongly
recommended for use in your vehicle:
Mercedes-Benz
325.0 Anticorrosion/Antifreeze agent.
Before the start of the winter season (or
once a year in hot southern regions), you
should have the anticorrosion/antifreeze
concentration checked. The coolant is also
regularly checked each time you bring your
vehicle to an authorized Mercedes-Benz
Light Truck Center for service.
429 Technical data
Fuels, coolants, lubricants, etc.
Anticorrosion/antifreeze quantity
ModelApproximate freeze protection
–35°F (–37°C)–49°F (–45°C)
G5006.35 US qt (6.0 l)7.0 US qt (6.6 l)
G55AMG6.76 US qt (6.4 l)7.4 US qt (7.0 l)
430 Technical data
Fuels, coolants, lubricants, etc.
Windshield/rear window washer
system and headlamp cleaning system
Fluid for the windshield/rear window
washer system and the headlamp cleaning
system is supplied from the windshield
washer reservoir. It has a capacity of
7.9 US qt (7.5 l).
The windshield washer reservoir is located
on the passenger side of the engine com-
partment (
page 275).
Refill the washer reservoir with
MB Windshield Washer Concentrate
“MB SummerFit” and water
(or concentrate and commercially
available premixed windshield washer
solvent/antifreeze, depending on
ambient temperatures).Windshield/rear window and
headlamp washer fluid mixing ratio
For temperatures above freezing point,
use MB Windshield Washer Concentrate
“MB SummerFit” and water:
1 part “MB SummerFit” to 100 parts
water
(1.34floz [40ml] “MBSummerFit” to
1gal [4.0l] water)
For temperatures below freezing point,
use MB Windshield Washer Concentrate
“MB SummerFit” and commercially
available premixed windshield washer
solvent/antifreeze:
1 part “MB SummerFit” to 100 parts
solvent
(1.34floz [40ml] “MBSummerFit” to
1 gal [4.0 l] solvent)
Warning!G
Washer solvent/antifreeze is highly flamma-
ble. Do not spill washer solvent/antifreeze
on hot engine parts, because it may ignite
and burn. You could be seriously burned.
437 Index
Driving on sand 259
Driving systems 197
Cruise control 197
Driving safety systems 88
Rear Parking Assist 200
Rear view camera 203
Rear view camera* 203
Driving through water 257
E
Easy-entry/exit feature
Activating 156
EBB 88, 92
Electrical fuses 405
Electrical outlet 223
In cargo compartment 224
In front passenger footwell 223
In rear passenger footwell 224
Electrical system
Technical data 419
Electronic Brake Booster (EBB) 92
Electronic Stability Program see ESP
®
Electronic systems
Message in display 365
Electronic Traction System (ETS) 91
Emergency calls
Tele Aid 230Emergency, In case of
Roadside Assistance 232
Emergency operation
Remote door unlock, Tele Aid 235
Emergency operation (Limp Home
Mode) 169
Emergency operations
Closing tilt/sliding sunroof 374
Locking the vehicle 371
Opening tilt/sliding sunroof 374
Unlocking the tailgate 371
Unlocking the vehicle 370
Emergency Tensioning Device see ETD
Emission control 263
Emission control information label 413
Ending
A call (telephone) 160
Engine
Compartment 267
Starting with SmartKey 54
Technical data 415
Turning off with SmartKey 64
Engine cleaning 316
Engine compartment 267
Hood 267Engine malfunction indicator lamp 27,
328–329
Engine oil 269, 425
Adding 273
Additives 425
Checking level 269
Consumption 269
Messages in display 271, 351–352
Oil dipstick 272
Engine oil level see Oil level
ESP
®27, 88, 92
Messages in display 341
Switching off 94
Switching on 95
Warning lamp 330–331
ETD 68, 78
Safety guidelines 72
Expanding cargo compartment 206
Extending gear range 168
Exterior lamp switch 117
Exterior lamps
Delayed shut-off 153
Exterior rear view mirrors
Adjusting 46
Exterior view 22
438 Index
F
Fastening the seat belts 48
Fine adjustment
Cruise control 199
First aid kit 366
Flat tire 390
Lifting the vehicle 391
Lowering the vehicle 394
Mounting the spare wheel 391
Spare wheel 368
Floormats 224
Fog lamp, rear 121, 378
Fog lamps
Corner-illuminating front fog
lamps 122
Fog lamps, front 121
4-ETS 88, 91
Front air bags 73
Front axle differential lock
Switching on 176
Front fog lamps
Messages in display 355
Replacing bulbs 378, 382
Front lamps
Replacing bulbs 378, 380
Switching on 117Front passenger front air bag off indicator
lamp 81, 337
Front seat head restraints
Installing 109
Removing 108
Front towing eye 404
Front turn signal lamp
Replacing bulbs 383
Fuel 265
Additives 427
Gasoline additives 427
Message in display 365
Premium unleaded gasoline 265,
424, 426
Refueling 264
Requirements 426
Reserve warning 27
Technical data 422
Fuel additives 427
Fuel consumption statistics
Since last reset 158
Since start 157
Fuel filler cap
Message in display 353Fuel filler flap 264
Locking 264
Opening 372
Unlocking 264
Fuel requirements 426
Fuel reserve tank
Message in display 353
Fuel reserve warning lamp 331
Fuel tank
Capacity 424
Filler flap 264
Fuels, coolants, lubricants, etc.
Capacities 422
Functions (control system) 135, 137,
139
Fuse box 406, 407, 408
Fuses 405
Fuse box in battery box 408
Fuse box in front passenger
footwell 406
Fuse box in middle tunnel 407
Main fuse box in passenger
compartment 406
441 Index
Lamps in instrument cluster 324
Lamps, exterior
Front 378
Messages in display 354–359
Rear 378
Replacing bulbs for front 380
Replacing bulbs for rear 385
Lamps, indicator and warning
ABS 324–325, 327
Battery (SmartKey) 102
Brakes 326–327
check engine 328–329
Engine diagnostics 328–329
ESP
®330–331
Fuel reserve 331
Instrument cluster 324–334
SRS 69, 334
Turn signals 27
Language
Setting 149
LATCH child seat anchors 83
Layout of poly-V-belt drive 414
Leather upholstery
Cleaning 322License plate lamps
Messages in display 356
Replacing bulbs 378, 387
Lifting
Vehicle 391
Light alloy wheels
Cleaning 320
Technical data 417, 418
Light sensor
Message in display 354
Lighter see Cigarette lighter
Lighting 117
Automatic headlamp mode 118
Combination switch 122
Daytime running lamp mode 119
Exterior lamp switch 117
Front fog lamps 121
High beam flasher 122
High beams 122
Instrument cluster illumination 130
Interior, front 125
Interior, rear 126
Locator lighting 120
Low beams 117
Manual headlamp mode 118
Night security illumination 120Parking lamps 117
Rear fog lamp 121
Settings (control system) 151
Limiting gear range 168
Limp Home Mode 169
Loading 206
Cargo compartment cover blind 214
Cargo tie-down rings 209
Instructions 208
Partition net* 210
Roof rack 206
Loading terminology 304
Loading the vehicle 280
Locator lighting 120
Setting 152
Locator lighting lamps
Replacing bulbs 378
Locking 62, 100
Fuel filler flap 264
Global, SmartKey 102
Vehicle in an emergency 371
Loss of keys 103