2007 MERCEDES-BENZ E63AMG WAGON wiper fluid

ContentsReplacing wiper blades ...................... 448
Placing front wiper arms in
vertical position ............................ 448
Removing front wiper blades ........ 449
Installing front wiper blades ......... 449
Removing rear wiper blade ........... 449
Installing rear wiper blade ............ 450
Flat tire .............................................. 451
Preparing the vehicle.................... 451
Sealing tires with TIREFIT ............. 451
Mounting the spare wheel ............ 456
Battery ............................................... 462
Disconnecting the battery ............ 464
Removing the battery ................... 464
Charging and reinstalling the
battery.......................................... 465
Reconnecting the battery ............. 465
Jump starting ..................................... 466
Towing the vehicle ............................. 468
Installing towing eye bolt.............. 470
Fuses ................................................. 471
Fuse box in passenger
compartment................................ 472
Fuse box in cargo compartment ... 472
Technical data................................. 473
Parts service ...................................... 474
Warranty coverage............................. 475
Loss of Service and Warranty
Information Booklet ..................... 475
Identification labels ........................... 476
Layout of poly-V-belt drive ................. 478
E 350 4MATIC .............................. 478
E 63 AMG ..................................... 478
Engine................................................ 479
Rims and tires.................................... 480
Same size tires ............................. 481
Mixed size tires ............................ 482
Spare wheel ................................. 483
Electrical system ............................... 484
Main dimensions and weight ............. 485
Main dimensions .......................... 485
Weight .......................................... 485Fuels, coolants, lubricants etc. .......... 486
Capacities .................................... 486
Engine oils ................................... 489
Engine oil additives ...................... 489
Air conditioning refrigerant .......... 489
Brake fluid.................................... 489
Premium unleaded gasoline ......... 490
Fuel requirements ........................ 490
Gasoline additives ........................ 491
Coolants ...................................... 491
Windshield washer system and
headlamp cleaning system*......... 494
Index................................................. 495

57 Getting started
Driving
The combination switch resets automati-
cally after major steering wheel move-
ments.
Windshield wipers
The combination switch is located on the
left of the steering column.Combination switch1Switching on windshield wipers
2Single wipe
Wiping with windshield washer fluid
Switch on the ignition (
page 37).
i
To signal minor directional changes such as
changing lanes, press combination switch only
to point of resistance and release. The corre-
sponding turn signals will flash three times.
!
Do not operate the windshield wipers when
the windshield is dry. Dust that accumulates on
a windshield might scratch the glass and/or
damage the wiper blades when wiping occurs on
a dry windshield. If it is necessary to operate the
windshield wipers in dry weather conditions, al-
ways operate the windshield wipers with wind-
shield washer fluid (
page 59).
!
If anything blocks the windshield wipers
(leaves, snow, etc.), switch them off immediate-
ly.


For safety reasons, stop the vehicle in a safe
location and

remove SmartKey from starter switch
or


turn off the engine by pressing the
KEYLESS-GO* start/stop button and
open the driver’s door (with the driver’s
door open, starter switch is in
position0, same as with SmartKey re-
moved from starter switch)
before attempting to remove any blockage.


Remove blockage.


Turn the windshield wipers on again.


58 Getting startedDrivingSwitching on/off windshield wipers
Turn the combination switch to the de-
sired position depending on the inten-
sity of the rain.
MWindshield wipers off
USlow intermittent wiping
Rain sensor operation with low
sensitivity.
VFast intermittent wiping
Rain sensor operation with high
sensitivity.
uSlow continuous wiping
tFast continuous wipingIntermittent wiping
Only switch on intermittent wiping under
wet weather conditions or in the presence
of precipitation.

Turn the combination switch to
positionU or V.
The wipers move across the wind-
shield. Afterward, the wiping intervals
are determined by the wetness of the
windshield.After the initial wipe, pauses between
wipes are automatically controlled by the
rain sensor.
Single wipe

Press the combination switch briefly in
direction of arrow2 (
page 57) to
the resistance point.
The windshield wipers wipe one time
without washer fluid.
If windshield wipers fail to function at all in com-
bination switch positionU or V,

set the combination switch to the next high-
er wiper speed


have the windshield wipers checked at the
nearest authorized Mercedes-Benz Center.
i
When the windshield wipers are switched on
and you brake the vehicle to a stop, the time in-
terval between wiper operations is increased.
!
Do not leave windshield wipers in
intermittent setting when the vehicle is taken to
an automatic car wash or during windshield
cleaning. Windshield wipers will operate in the
presence of water sprayed on the windshield,
and windshield wipers may be damaged as a re-
sult.
!
If you have set intermittent wiping, dirt on
the surface of the rain sensor or optical effects
may cause the windshield wipers to wipe in an
undesired fashion. This could then damage the
windshield wiper blades or scratch the windows.
You should therefore switch off the windshield
wipers when weather conditions are dry.
i
Intermittent wiping is interrupted when the
vehicle is at a standstill and a door is opened.
This protects persons getting into or out of the
vehicle from being sprayed.
Intermittent wiping will be continued when


all doors are closed
and


the gear selector lever is in positionD or R
or


the wiper setting is changed using the com-
bination switch


59 Getting started
Driving
Wiping with windshield washer fluid
Push the combination switch in direc-
tion of arrow2 (
page 57) past the
resistance point.
The windshield wipers operate with
washer fluid.
For information on filling up the windshield
washer reservoir, see “Windshield/rear
window washer system and headlamp
cleaning system*” (
page 331).
Rear window wiper/washer
The combination switch is located on the
left of the steering column.Combination switch1Rear window wiper switch
2Wiping rear window with washer fluid
3Intermittent wiping
4Rear window wiper off
5Wiping rear window with washer fluid
Switch on the ignition (
page 37).Activating intermittent wipe

Turn rear window wiper switch1 to
position3.
Deactivating intermittent wipe

Turn rear window wiper switch1 to
position4.
Wiping with windshield washer fluid

Turn and hold rear window wiper
switch1 to position2 or 5 until the
rear window is clean.
The rear window wiper operates with
washer fluid.
For information on filling up the windshield
washer reservoir, see “Windshield/rear
window washer system and headlamp
cleaning system*” (
page 331).
i
To prevent smears on the windshield or
noisy/chattering wiper blades, wipe with wind-
shield washer fluid every now and then even
when it is raining.
i
The rear window wiper engages
automatically if the gear selector lever is moved
to positionR with the windshield wipers
switched on.

200 Controls in detailGood visibilityFor information on windshield wipers, see
“Windshield wipers” (
page 57).
Headlamp cleaning system*
The button is located on the left side of the
dashboard.
1Headlamp cleaning button
Switch on the ignition (
page 37).

Press button1.
The headlamps are cleaned with a
high-pressure water jet.For information on filling up the washer
reservoir, see “Windshield/rear window
washer system and headlamp cleaning
system*” (
page 331).
Rear view mirrors
For more information on setting the rear
view mirrors, see “Mirrors” (
page 47).
Auto-dimming mirrors
The reflection brightness of the exterior
rear view mirror on the driver’s side and
the interior rear view mirror will respond
automatically to glare when


the ignition is switched on
and


incoming light from headlamps falls on
the sensor in the interior rear view mir-
ror
The rear view mirrors will not react if


reverse gear R is engaged


the interior lighting is turned on
i
The headlamps will automatically be
cleaned when you have


switched on the headlamps
and


operated the windshield wipers with wind-
shield washer fluid fifteen times
When you switch off the ignition, the counter re-
sets.

512 IndexVehicle loading
Cargo tie-down rings 270
Instructions 269
Load limit 337
Terminology 358
Vehicle maximum load on the tire 361
Vehicle Recovery services, Stolen
(Tele Aid) 299
Vehicle status message memory 168
Vehicle tool kit 430
Vehicle jack 432
Vehicle washing 370
W
Warning lamps see Lamps, Indicator and
warning
Warning sounds
Distance warning function* 258
Distronic* 252
Driver’s or passenger’s seat belt 85
Parking brake 55
Seat belt telltale 386, 387
Warranty coverage 475
Washer fluid see Windshield washer fluid
Washer reservoir level 494
Washing the vehicle 368
Wear pattern, Tires 361Weight, Vehicle 485
Wheel
Change 456
Removing 458
Spare 458
Tightening torque 461
Wheels, Sizes 481
Wheels, Tires and 332
Window curtain air bags 75
Windows see Power windows 239
Windows, cleaning 372
Windshield
Cleaning 59
Cleaning wiper blades 372
Defogging 215, 232
Windshield washer fluid 494
Messages in display 428
Mixing ratio 494
Refilling 331
Wiping 59
Windshield washer system 494
Windshield wipers 57
Cleaning wiper blades 372
Replacing front wiper blades 449
Replacing rear wiper blade 450Winter driving
Block heater* (Canada only) 364
Snow chains 364
Tires 363
Winter driving instructions 316
Winter tires 363
Wood trims, cleaning 375