2007 MERCEDES-BENZ C-CLASS SALOON wheel bolt torque

16
Warning triangle
. . . . . . . . . . . . . . . .232
Washer fluid Display message . . . . . . . . . . . . . .275
Wearing seat belts . . . . . . . . . . . . . . ..98
Wheel bolts Tightening torque . . . . . . . . . . . . . .322
Wheels
General notes . . . . . . . . . . . . . . . . .210
Interchanging . . . . . . . . . . . . . . . . .215
Technical data . . . . . . . . . . . . . . . .348
Windowbags . . . . . . . . . . . . . . . . . . . . .52
Display message (luxury multi -
function steering wheel) . . . . . . . .274
Display message (multi-function
steering wheel) . . . . . . . . . . . . . . .246
Windows
Cleaning . . . . . . . . . . . . . . . . . . . . .228
Cleaning the windscreen . . . . . . . .228
Misted up (Thermatic) . . . . . . . . . .162
Misted up (Thermotronic) . . . . . . .169
Side windows . . . . . . . . . . . . . . . . .110
Windows misted up
Thermatic . . . . . . . . . . . . . . . . . . . .162
Thermotronic . . . . . . . . . . . . . . . . .169
Windscree n
Cleaning . . . . . . . . . . . . . . . . . . . . .228
Windscreen washer fluid . . . . . . . ..371
Topping up . . . . . . . . . . . . . . . . . . .210
Windscreen washer fluid reservoir
. . . . . . . . . . . . . . . . . . . . . . . . . .210, 371 Windscreen washer reservoir
Capacity . . . . . . . . . . . . . . . . . . . . .371
Windscreen washer syste m. . . . . . .371
Windscreen wipers . . . . . . . . . . . . ..108
Cleaning . . . . . . . . . . . . . . . . . . . . .228
Malfunction . . . . . . . . . . . . . . . . . .294
Replacing the wiper blades . . . . . .312
Winter diesel . . . . . . . . . . . . . . . . . . .206
Winter drivin g. . . . . . . . . . . . . .216, 217
Winter tyres . . . . . . . . . . . . . . . . . . . .216
Limit speed (on-board computer,
luxury multi-function steering
wheel) . . . . . . . . . . . . . . . . . . . . . .151 Index
204_AKB; 2; 3, en-GB
mkalafa,
2007-06-26T23:11:51+02:00 - Seite 16

Tyres and wheels
21
5
X
Press the íbutton.
The following appears in the multi-function
display: Tyre press. OK?
Yes+ Cancel -
To confirm the restart of the tyre pressure
loss warning system:
X Press the +button.
The following appears in the multi-function
display: Run Flat Indicator restar -
ted.
After a teach-in period, the tyre pressure
loss warning system* will monitor the set
tyre pressures of all four tyres.
or
To cancel the restart of the tyre pressure
loss warning system:
X Press the -button.
The previous settings will not be changed.
Configuring with the luxury multi-func-
tion steering wheel*
X Make sure that the key is in position 2in
the ignition lock .
X Press (or& to select the Service
menu. X
Press $or% to select Tyre pres-
sur e.
X Press #.
The following appears in the multi-function
display: Run Flat Indicator active
Restart with OK
X Press #.
The following appears in the multi-function
display: Tyre press. now OK?
To confirm the restart of the tyre pressur e
loss warning system:
X Press $or% to select Yes.
X Press #.
The following appears in the multi-function
display: Run Flat Indicator restarted
After a teach-in period, the tyre pressure
loss warning system* will monitor the set
tyre pressures of all four tyres.
or
To cancel the restart of the tyre pressur e
loss warning system:
X Press $or% to select Cancel.
X Press #.
The previous settings will not be changed. Interchanging the wheels
G
Risk of accident
Interchange the front and rear wheels only
if they have the same dimensions, for exam-
ple size, offset, etc.
After every wheel interchange/change,
have the tightening torque checked at a
qualified specialist workshop that has the
necessary specialist knowledge and tools
to carry out the work required. Mercedes-
Benz recommends that you use a
Mercedes-Benz Service Centre for this pur-
pose. In particular, work relevant to safety
or on safety-related systems must be car-
ried out at a qualified specialist workshop.
The wheels could work loose if they are not
tightened to a tightening torque of
130 Nm.
For safety reasons, Mercedes-Benz recom -
mends that you only use wheel bolts of the
correct size which have been approved for
Mercedes-Benz vehicles.
The wheels may be interchanged every 5,000
km to 10,000 km depending on the degree of
tyre wear, provided that the vehicle has the
same size front and rear tyres. Do not reverse
the direction of tyre rotation. Operation
* optiona l
204_AKB; 2; 3, en-GB
mkalafa,
2007-06-26T23:11:51+02:00 - Seite 215 Z

Flat tyre
322 G
Risk of accident
If a wheel hub thread is damaged, you mus t
not drive the vehicle any further. Consult a
qualified specialist workshop which has the
necessary specialist knowledge and tools
to carry out the work required. Mercedes-
Benz recommends that you use a
Mercedes-Benz Service Centre or Service
24h for this purpose. In particular, work rel-
evant to safety or on safety-related systems
must be carried out at a qualified specialist
workshop. G
Risk of accident
Only use wheel bolts that have bee n
designed for the wheel and the vehicle. For
safety reasons, Mercedes-Benz recom -
mends that you only use wheel bolts which
have been approved for Mercedes-Benz
vehicles. Other bolts could work loose .
Do not tighten the wheel bolts completel y
while the vehicle is still jacked up. The vehi -
cle could topple off the jack.
X Clean the wheel and wheel hub contact
surfaces. X
Place the "Minispare" emergency spare
wheel* or the spare wheel onto the wheel
hub and push it on.
X Tighten the wheel bolts until they are fin-
ger-tight. Lowering the vehicle
X
Lower the vehicle. To do this, turn the crank
of the jack anti-clockwise until the vehicle
is standing firmly on the ground again.
X Place the jack to one side. 1
–5 Wheel bolts
X Tighten the wheel bolts evenly in a cross-
wise pattern in the sequence indica-
ted (1 to5 ). The tightening torque must
be 130 Nm. G
Risk of accident
Have the tightening torque checked imme-
diately after a wheel is changed. The wheel s
could work loose if they are not tightened
to a tightening torque of 130 Nm.Practical advice
* optional
204_AKB; 2; 3, en-GB
mkalafa,
2007-06-26T23:11:51+02:00 - Seite 322