2007 MAZDA MODEL 3 HATCHBACK display

DRIVER’S VIEW
Always check the Owner’s Manual for more operating information and safety features
1. Power window switches*,
see Windows/Mirrors
2. Door locks*, see Locks
3. Mirror controls*,
see Windows/Mirrors
4. Xenon headlight leveling
switch*,see Getting Started
5. Air vents
6. Turn signal/lighting control
lever, see Getting Started7. Fog light switch*,see Getting Started8. Audio control switches*,see Getting Started
9. Horn/Air bag, To beep: Press
10. Cruise control*, see Getting Started11. Wiper/washer control
lever,see Getting Started
12. Hazard warning switch
Push to activate/deactivate
13. NAVI display*,see Owner’s Manual
14. Information display/
trip computer*,
see Information Display15. Audio system,see Audio Systems
16. Passenger air bag
17. Bottle holder
CAUTION: Use plastic
bottles with caps, cups may
spill when door is closed
18. Traction Control/
Dynamic Control System
off*,
see Driving Tips19. NAVI DVD*20. Climate control panel,
see Climate Controls
21. Cigarette lighter
22. Passenger air bag off
indicator,see Getting Started
23. Ashtray
24. NAVI remote control*25. Parking-brake lever
26. Center console
DSCOFF
Driver’s
View
231
34
17
352723
20
54516618711513129108
30313332
2
17
1415
25
19212229
24
28
1
263736
*Denotes optional equipment
27. Cup holder
Tip: Rear cup holders
located in rear center armrest
28. Gearshift lever, see Transaxle29. Heated seats*Press on/off
30. Tilt/telescopic steering
wheel lever,
see Getting Started
31. Hood release handle
Pull release handle to unlock
32. Instrument cluster
lighting, see Getting Started
33. Storage
34. Fuel-filler lid release
To open: Pull lever up
35. Remote trunk-lid
release (4-Door only)
To open: Pull lever up
36. Auxiliary jack
37. Accessory socket

INSTRUMENT CLUSTER
Always check the Owner’s Manual for more operating information and safety features
WARNING LIGHTS
• Cruise control on*,Amber light: Cruise control
system activated
Green light: Cruising speed set;
see Getting Started
• Tire Pressure Monitoring
System (TPMS)*,
see Getting Started
• Turn signals/hazard
warning on
• High beams on
• Engine oil-pressure
warning light
Stop car when safe and turn
off engine; check oil level
• Brake system
Parking brake on/low brake fluid
GAUGES
1. Fuel gauge
15-gallon/55-liter tank
(2.0L and 2.3L engines)
2. Odometer/Trip meter
3. Gear indicator (A/T only)*
Displays current gear
position
4. Tachometer
• Always fasten seat belts
• Security indicator light*
• Lights on
• Charging system
warning light
Charging system malfunction;
dealer inspection required
• Air bag/front seat belt
pretensioner system
If light flashes or stays on, the air
bags/front seat belt pretensioners
may not operate in an accident;
dealer inspection required
• Dynamic Stability
Control (DSC)*,
see Driving Tips
• Traction Control/
Dynamic Control System off*DSC
OFF
5. Instrument cluster
dimmer select button*,
see Getting Started
6. Speedometer
7. Odometer/Trip meter
selector
Press to view odometer; press
again to reset trip odometer
A/B settings
Instrument
Cluster
Instrument
Cluster
nim/0001x
H
P
TRIPA80.0
RNDM8
C
F
E
5748
6
1 32
hpm
km/h
80220 200 180
160
140
120
100
60
40
20
0
0 20 40 6080100120
1400 1 2 3 4567
8
• Door ajar
• Power steering
malfunction
Dealer inspection required if light
remains on
• Check engine
Dealer inspection required
• OLow fuel
• Automatic
transaxle warning light*
Automatic transaxle malfunction;
dealer inspection required
• Anti-lock Brake
System (ABS)*
ABS malfunction, normal brakes
only; dealer inspection required
• Low washer fluid
level warning light
8. Engine coolant
temperature gauge
Stop car if above normal
range, turn off engine, let
vehicle cool; check coolant
level when safe
CRUISE
*Denotes optional equipment

REAR SEATS
Always check the Owner’s Manual for more operating information and safety features
Automatic
Transaxle*
Gearshift
must be in
Park or
Neutral to
start engine;
it must
be in Park
to remove
ignition key
P = Park
To move gearshift from Park:
Press firmly on brake pedal then
move the shift lever out of P
R = Reverse
N = Neutral
No gear engaged
D Drive (Overdrive)
For normal driving: Shifts through
all forward gears automatically
Rear Seats
Transaxle
Rear center position
seat belt†
Pull seat belt (1) from recess
located behind head restraint
(A) (4-Door) or left side of cargo
area (B) (5-Door): Slide tongues
with finger while moving upward
Fastening seat belt: Tongue (2)
and anchor (3) must be fastened,then slowly pull out lap/shoulder
belt (4) and insert tongue (5) into
buckle (6) until click is heard
Unfastening seat belt: Depress
buckle button to release
Stowing seat belt: Retract belt,
put tongues (2) and (5) together,
insert securely into recess
(A orB)
M (Sport A/T
manual shift mode)
Move shifter from
D to M to engage
manual shift mode,
M will be illuminated
for manual mode on
shift position indicator located
in the instrument panel
Manual shifting of transmission
is achieved by moving shifter
back to upshift and forward to
downshift, move shifter from
M to D to engage automatic
shift mode
Gear indicator
(A/T only)*
Illuminated numeral of
gear indicator located
in the instrument
panel displays current
gear in Automatic and
Manual shift modesManual transaxle
Depress clutch pedal to start
engine and change gears
Tips: Do not shift into 1st
above 20 mph or clutch
failure could occur
6-Speed manual transaxle:
To engage in reverse, push
shift lever down and move
towards "R" position
Ignition key
release button
(M/T only)
Press button (1)
to remove key
from ignition
P
R
N
D M
LOCKACCON
1
6
5-Speed6-Speed
2365
1
4
AB
Split fold-down rear
seatbacks
To fold: Push release knob (1),
push seatback down
To return and lock: Push
seatback firmly until latched,
make sure seatbelts are returned
to original positions
Tip: 4-Door has seatback locks
as part of trunk securityWARNING: Lower seatback
slowly using both hands,
seatback is heavy and could
cause personal injury
Tip: Rear cup holders located
in rear center armrest
1
1
PRNDM
h
/h220 200
3*Denotes optional equipment†See Owner’s Manual

CLIMATE CONTROLS
Always check the Owner’s Manual for more operating information and safety features
1. Air flow selections
= air to dash
= air to dash and floor
= air to floor
= air to floor and windshield
= defrost, air to windshield
2. Fan control
Rotate knob right/left to
increase/decrease fan speed6. Air Conditioning*
Press to activate/deactivate
Tip: With air flow switch in
floor position and
defrost positions or :
A/C turns ON, air intake
switches to fresh air
7. OFF
Press (7) to turn system off
(Automatic System), rotate
knob (2) to 0 (Manual System) Automatic operation
Press AUTO (9) for automatic
operation; rotate dial to set
temperature, see Owner’s Manual
Tip: Automatic climate control
display viewed via information
display, see below
3. Temperature control
Rotate knob to blue for cool,
red for warm
4. Rear window defogger
Press to activate/deactivate
5. Air intake control
Press to select recirculated
(indicator light on) or outside
(indicator light off) air mode
WARNING: Do not use
recirculated air mode in cold
weather; windows will fog
and hamper vision
8. AMB*
Press to display ambient
temperature, press again to
switch display to temperature
set for air conditioner
Tip: With audio system
ON, temperature display
can be switched between
Centigrade and Fahrenheit
or vice versa by pressing
audio POWER button and
MEDIA button and holding
both for five seconds or more
Control positions for
maximum defrost
Fan to maximum, temperature
to maximum hot, air flow
selector knob to
Tips: To help prevent windshield
fogging in humid weather,
select before starting engine
To prevent moisture buildup,
never drive with A/C system off
Objects placed under the front
seats may interfere with air
flow to the rear
Information displayInformation display has the
following functions: Trip computer*/
clock (1), audio display, automatic
climate control display and ambient
temperature display* (AMB)
Trip computer* can display current
fuel economy, average fuel economy,
approximate distance you cantravel on available fuel and average
vehicle speed
Ignition must be in ON position,
press INFO button* (2) to change
trip computer display mode
Tip: Press CLOCK button (3)
to display clock
See Owner’s Manual
Climate
Controls
Information
Display
PUSH OFF PUSH AUTO MODE
AMB A/C
2 7 9 1
MODE
04132
A/C
564
1233
6 5 4 8 Manual Automatic*
CLOCK INFO FM /AM SAT CD MEDIA
23
AMB CD IN MD IN ST CONSUM CUR
mpgRPT RDM AUTO-M FO72.0103.522.4AUTOA/C ECO1
*Denotes optional equipment

RADIO/COMPACT DISC
Always check the Owner’s Manual for more operating information and safety features
CD: Press to select
next/beginning of current track
Tape: Press to automatically
advance tape to beginning of
next selection/replay selection;
to stop this operation, press
button again
6. Scan
Press to briefly sample next
listenable selections; functions
in all modes
7. RPT
Press to replay current selection
8. Clock
To set: With ignition in ACC or
ON position, press (8) and hold
until beep sounds; 12 hr/24 hr
will be displayed; press (9)to
select; press (8) again while
selection is flashing: Hr ADJUST
displays; press (9) to select hr;
press (8) when done, do
the same to set minutes
/
/
Audio systems1. Power/Volume
Press to turn on/off; rotate
to increase/decrease volume
2. Program Random
†Press to enable/cancel
random play
3. Tune/Auto-Memory/Display
Radio: Press and hold until a beep
sound is heard; system auto-
matically scans and temporarily
stores up to six strong stations
in each band; press again to
switch to another preset station
Tune: Rotate counterclockwise/
clockwise for lower frequency/
higher frequency
4. Program
Press to change cassette
tape-play direction
5. SEEK/TRACK/APC
Radio: Press to
automatically seek higher/
lower frequency
/
12. CD
Press to play CD
13. MEDIA*
Press to play cassette tape
and to play device plugged
into auxiliary jack (auxiliary
jack located in center console,
see Driver’s View)
14. LOAD*
To load multiple discs: Press
and hold LOAD (14) until beep
sound is heard; insert CD
when “In” is displayed
To eject disc: Press Eject (16)
To eject specific disc: Press and
hold Eject (16) until beep sound
is heard; within five seconds
press the desired tray
number 1-6 (17)
15. CD slot
16. CD eject button
17. Memory preset buttons
To set: Tune to station, press and
hold until beep sound is heard 9. SET or INFO*
Clock setting button, see Clock (8)
See Information Display
10. FM/AM
Press to turn radio on and
select between FM1/FM2/AM
station preset buttons (17)
11. SAT*
Satellite ready capability
21. Cassette door*
22. Eject button*
23. Dolby
®Noise
Reduction*
Reduces tape noise and hiss;
press to activate/deactivate
24. Text/Audio Control
Audio control: Press to select
ALC/BASS/TREBLE/FADE/
BAL/BEEP ON/ILLM ON
Rotate right/left to adjust
selected feature
Tip: Automatic Level Control
(ALC) automatically adjusts
audio volume depending
on vehicle speed
25. Reverse
Press to reverse through
a track
26. Display, see Information Display
18. Disc up†
Press to skip forward to
beginning of next CD
19. Disc down
†Press to skip back to beginning
of previous CD
20. Fast forward
Press to fast forward
through a track
Audio
Systems
Audio
Systems
*Denotes optional equipment†For use with CD, or CD changer*
LOADCLOCK
SCAN
PROGRPT
RDM
1
42
53
6
VOL
FM /AM SAT CD MEDIA
3242322211225
8910111214151613
65
7
4
181920
17 . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
AMB CD IN MD IN ST CONSUM CUR
mpgRPT RDM AUTO-M FO72.0103.522.4AU TOA/C ECO
26