PROVISIONS FOR THE PROCESSING OF A VEHICLE
AT THE END OF ITS LIFE-CYCLE
For years now Lancia has been developing its global commitment towards the safeguarding and protection of the
Environment through the continuous improvement of its production processes and the making of increasingly more
“eco friendly” products. With a view to guaranteeing the best possible service to clients in full observance of
environmental standards and in response to the obligations imposed by European Directive 2000/53/EC on end-
of-life vehicles, Lancia offers its clients the possibility to hand in their vehicle* at the end of its life span without
additional costs.
The European Directive, in fact, provides for the take-back of the vehicle without the last holder or owner of the
same incurring expenses due to the fact that the market value of the vehicle is zero or negative. In particular, in
almost all of the countries of the European Union, up until 1st January 2007, take-back of the vehicle free of
charge only applies to vehicles registered from 1 July 2002 on, while, from 2007 on, take-back will be carried out
free of charge, independently of the year of registration, provided that the vehicle still contains all its essential
component parts (especially engine and body) and is free from additional waste materials.
Our contracted network of authorised treatment facilities has been carefully selected in order to provide a quality
service to our customers by de-polluting and recycling “End of Life Vehicles” to approved environmental
standards. To find out the location of your nearest authorised treatment facility, offering free of charge take-back,
simply contact one of our dealers or refer to the Lancia web site or call the toll free number 00800 526242 00.
*
Passenger transportation vehicles to seat a max. of nine persons, having a total admissible weight of 3.5 t
Fiat Auto S.p.A.
Quality - Assistenza Tecnica - Ingegneria Assistenziale
Largo Senatore G. Agnelli, 5 - 10040 Volvera - Torino (Italia)
Print n. 603.45.954 - XI/2006 - 2ndEdition
COLD TYRE INFLATION PRESSURE (bar) (snow tyres excluded)
ENGINE OIL CHANGE
5.505.50 5.0
FUEL CAPACITIES
5.90
75
1075
1075
1075
10 215/60 R16 95W
215/60 ZR16 95W
225/50 R17 94W (*)
225/50 ZR17 94W (*)
2.3
2.3 215/60 R16 95W
215/60 ZR16 95W
225/50 R17 94W (*)
225/50 ZR17 94W (*)
2.3
2.3 215/60 R16 95W
215/60 ZR16 95W
225/50 R17 94W (*)
225/50 ZR17 94W (*)
2.3
2.3215/60 R16 95W
215/60 ZR16 95W
225/50 R17 94W (*)
225/50 ZR17 94W (*)
2.3
2.3
2.0 TB 2.4 2.4 CAE 2.4 JTD 20VCAE 3.2 V6 CAE
Front and rear
tyres
Reduced load bar
Full load bar
(*) Tyres that cannot be fitted with chains.
0.3 bar should be added to the values given if the pressure is measured while the tyre is hot.
2.0 TB 2.4 - 2.4 CAE 2.4 JTD 20VCAE 3.2 V6 CAE
Engine oil (quantity for
periodical remplacement -
sump and filter) litres
#Dispose of waste oil properly.
2.0 TB 2.4 - 2.4 CAE 2.4 JTD 20VCAE 3.2 V6 CAE
Tank capacity litres
Reserve litres
Refuel petrol engines with unleaded petrol with octane rating (RON) no lower than 95 only.
Refuel diesel engines with diesel fuel for motor vehicles (EN590 specifications) only.
