2007 Lancia Musa buttons

97
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
Button for fast windscreen and
front side window
demisting/defrosting F
Press this button: the climate control
system will automatically switch on
all the functions required for fast windscreen and
front side window demisting/defrosting, that is:
❒climate control system compressor on (with
proper climatic conditions);
❒air recirculation off;
❒maximum air temperature HI on both areas;
❒fan speed according to engine coolant
temperature in order to limit letting cold air into
the passenger compartment for demisting the
windows;
❒air flow directed to the windscreen and front side
window vents;
❒heated rear windowIMPORTANT The fast windscreen
demisting/defrosting function stays on for approx.
3 minutes after the engine coolant temperature
exceeds 50°C (petrol versions) or 35°C
(Multijet versions).
When the max. demisting/defrosting function is on,
the led on the relevant button and that on the
heated rear window button turn on. Message FULL
AUTO on the display will turn off.
When the max. demisting/defrosting function is on,
the only manual operations possible are manual
adjustment of the fan and switching rear window
heating off.
Press button F or air recirculation button C or
compressor button B or AUTO buttons N o H to
reset the previous system operation conditions.

103
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
AUTOMATIC HEADLIGHTS SENSOR (daylight sensor)
(where provided)
It detects the changes of the external light intensity of the car
according to the light sensitivity set: greater is the sensitivity, smaller
is the amount of external light necessary to control the switching-on
of the exterior headlights. The daylight sensor sensitivity can be
adjusted with the “Set-up menu” of “multifunction display”.
Activation
Turn the knurled ring to
2A: in this way, the automatic activation of
the side/taillights and dipped beam headlights is simultaneously
enabled according to the external luminosity.
When the daylight sensor is on, the display shows the preset
sensitivity level. During displaying, the sensitivity level can be
adjusted using buttons +and–.
Deactivation
As a result of the sensor control, the dipped beam headlights will
switch off and, after about 10 seconds, sidelights will switch off too.
If during automatic light activation,
main beam headlights have been switched on (manually), they will go
off at automatic light switching off.
IMPORTANT The light sensor is not able to detect the fog presence,
lights shall therefore be switched on manually.
L0D0072m
L0D0025m

128
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
Continuous automatic operation
(only for front windows, where provided)
Certain versions with four power windows with
automatic opening/closing for front (where fitted)
windows and automatic opening only for rear
windows are fitted – just on front (where fitted)
doors - with crush-prevention seal safety system
capable of reversing the window motion when
detecting the contact between an obstacle and the
window seal.
A – B Buttons with continuous automatic
operation both for lowering and raising the
window;
C – D Buttons with continuous automatic
operation only for window opening.
Pressing briefly one of the control buttons, the
window moves “jerking” and it stops when the
button is released.PASSENGER’S DOOR AND REAR DOORS
(where fitted)
On each door panel there is the switch for
controlling the respective window.
WARNING
Improper use of the power windows can be dangerous. Before and during its
operation ensure that any passengers are not at risk from the moving glass either
by personal objects getting caught in the mechanism or by being injured by it
directly. Always remove the ignition key when getting out of the car to prevent the
power windows being operated accidentally and constituting a danger to the
passengers in the car.

137
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
To adjust the headlight slant
To adjust the headlight slant operate buttons
andÒlocated on the
dashboard.
The display provides the visual indication of the positions during the
adjustment operation.
Position 0 - one or two people occupying the front seats.
Position 1 - five people.
Position 2 - five people + load in the boot.
Position 3 - driver + maximum permissible load stowed in the boot.
IMPORTANT Check beam aiming every time the load carried
changes.
HEADLIGHT ADJUSTMENT ABROAD
The dipped-beam headlights are adjusted for circulation in the
country in which the vehicle is marketed. In countries with opposite
circulation, to avoid glaring oncoming vehicles, it is necessary to
cover the areas of the headlight as shown below: this is done using
non-transparent sticker tape.
Figures refer to passing from right-hand drive to left-hand drive.
L0D0116m
L0D0118m
L0D0119m

338
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
DASHBOARDAND CONTROLS
INDEX
Emergency device for
locking doors from the
outside........................... 15-252
Engine
– fuel feed ......................... 322
– identification code .......... 321
– injection/ignition ........... 184
– technical data ................ 322
Engine compartment .......... 297
Engine coolant gauge .......... 28
Engine coolant level ............ 101
Engine oil
– checking level ................. 299
– consumption ................... 299
– technical specifications ... 333
Environment (protection) .... 156
EOBD (system) .................. 144
ESP (system) ...................... 140
External lights ..................... 99
Fix &Go (tyre repair kit) .... 256
Flashing the headlights ....... 100
Fluids and lubricants .......... 333
Follow me home (device) .... 102
FPS (fuel cut-off switch) .... 117
Front fog lights
– bulb replacement ............ 274– control button ................. 115
Fuel
– consumption ................... 335
– fuel cut-off switch ........... 117
– level gauge ..................... 27
– fuel cut-off switch ........... 117
Fuel filler cap ...................... 155
Fuses ................................... 280
Glass/can holders................ 120
Handbrake ......................... 187
Hazard lights
– control ........................... 115
Head restraints ................... 77
Headlights .......................... 103
(electric adjusting device) .. 103
Heated rear window ...........85-97
Identification data ............. 319
Ignition switch .................... 20
In an emergency................ 251
Instrument panel ................ 26
Instruments ......................... 27
Interior equipment ............. 125
Interior fittings
– current socket ................. 122
– glass / can holder ........120-121– magnetic card/ticket
slots ................................ 121
– oddment compartments .. 119
– rear CD compartment
with glass/can holder ..120-121
– roof bracket .................... 121
– upper oddment
compartments ................ 118
Interiors ............................. 317
Isofix (child seat) ................ 172
Jack ................................... 265
Jacking the car .................... 287
Key kit and door locking .... 10
Lancia CODE (system) ...... 8
Light control buttons .......... 115
Load limiters ....................... 163
Lubricants (specifications) .. 333
Magnetic card/ticket slots ... 121
Main beam headlights
– bulb replacement ............ 272
– control ........................... 100