2007 Lancia Musa warning light

317
WARNING
LIGHTS AND
MESSAGES
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
INTERIORS
Periodically check that water is not trapped under
the mats (due to water dripping off shoes,
umbrellas, etc.) which could cause oxidisation of the
sheet metal.
CLEANING SEATS AND FABRIC AND VELVET
PA R T S
Use a soft brush or vacuum cleaner to remove dust.
Velvet is cleaned better if the brush is moistened.
Rub the seats with a sponge moistened with a
solution of water and neutral detergent.
INTERIOR PLASTIC PARTS
For routine cleaning, wipe with a cloth with water
and neutral non-abrasive detergent. Remove grease
or persistent stains with appropriate products
designed to preserve the appearance of components.
IMPORTANT Never use spirit or petroleum to clean
the instrument panel or other plastic parts.STEERING WHEEL/GEAR LEVER KNOB
WITH GENUINE LEATHER COVERING
These components shall only be cleaned with water
and neutral soap. Never use spirit or alcohol-based
products.
Before using special products for cleaning interiors,
read carefully label instructions and indications to
make sure they are free from spirit and/or alcohol-
based substances.
If when cleaning the windscreen with special glass
products, some drops fall on the leather covering of
the steering wheel/gear lever knob remove them
immediately and then clean with water and neutral
soap.
IMPORTANT Take the utmost care when engaging
the steering lock to prevent scratching the leather
covering.
Do not keep aerosol cans in the car: they might explode. Aerosol cans must never
be exposed to a temperature above 50°C. The temperature inside the car exposed
to the sun may go well beyond that figure.
WARNING

318
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARDAND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
TECHNICAL SPECIFICATIONS
IDENTIFICATION DATA ..................................... 319
ENGINE CODES - BODYWORK VERSIONS ........ 321
ENGINE ............................................................... 322
FUEL FEED/IGNITION ....................................... 323
TRANSMISSION .................................................. 323
BRAKES ................................................................ 324
SUSPENSIONS ...................................................... 324
STEERING ............................................................ 324
WHEELS............................................................... 325
DIMENSIONS ........................................................ 329
PERFORMANCE ................................................... 330
WEIGHTS ............................................................. 331
CAPACITIES ......................................................... 332
FLUIDS AND LUBRICANTS ................................. 333
FUEL CONSUMPTION ......................................... 335
CO
2EMISSIONS .................................................. 336

IDENTIFICATION DATA
You are advised to note the identification codes. The identification
data stamped and given on the plates and their position are the
following:
1 - Model plate
2 - Chassis marking
3 - Bodywork paint identification plate
4 - Engine marking.
MODEL PLATE
The plate is to be found on the front crossmember of the engine
compartment and bears the following identification data:
A - Manufacturer’ name.
B - Homologation number.
C - Vehicle type code.
D - Chassis number.
E - Maximum vehicle weight fully loaded.
F - Maximum vehicle weight fully loaded with trailer.
G - Maximum vehicle weight on front axle.
H - Maximum vehicle weight on rear axle.
I - Engine type.
L - Body version code.
M - Spare part code.
N - Smoke opacity index (for diesel engines).
319
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARDAND CONTROLS
SAFETY
DEVICES
ACORRECT
USE OF
THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
L0D0225m
L0D0226m

CHASSIS MARKING
It is printed on the passenger compartment floor, near the right-hand
front seat.
It can be reached by lifting the special flap in the carpeting and
includes the following data:
❒car model;
❒chassis number.
BODYWORK PAINT
IDENTIFICATION PLATE
It is applied on front bonnet and shows following data:
A - Paint manufacturer.
B - Colour name.
C - Lancia colour code.
D - Respray and touch up code.
ENGINE MARKING
Engine marking is stamped on the cylinder block on passenger
compartment side and includes the model and the chassis number.
320
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARDAND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
L0D0228m
L0D0227m

ENGINE CODES - BODYWORK VERSIONS
Versions
1.48V(◊)
1.416V
1.416VDual FuNction System
1.3 Multijet 70HP
1.3 Multijet 70 HP Dual FuNction System
1.3 Multijet 90HP
1.3 Multijet 90 HP Dual FuNction System
1.9 Multijet
(◊) Engine model provided for certain versions/markets only
(*) Version with DPF
321
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARDAND CONTROLS
SAFETY
DEVICES
ACORRECT
USE OF
THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
Engine code
350A1000
843A1000
843A1000
188A9000
188A9000
199A3000
199A3000
188B2000Bodywork version code
350 AXF1A 08CL
350 AXA1B 07 CL
350 AXA11 04 CL
350 AXBIA 01 BL
350 AXB11 05 BL
350 AXG1A 09 NL (4-seat)
350 AXG1A 09 ML (5-seat)
350 AXG1A 09 TL (4-seat) (*)
350 AXG1A 09 SL (5-seat) (*)
350 AXG11 09 HL (4-seat)
350 AXG11 09 GL (5-seat)
350 AXG1A 02 GL

322
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARDAND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
1.3 Multijet 70HP
188A9000
Diesel
4 in line
4
69.6 x 82
1248
18±0.4
51
70
4000
180
18.3
1750
–
Unleaded petrol
95 RON (EN228
Specifications)1.3 Multijet 90HP
199A3000
Diesel
4 in line
4
69.6 x 82
1248
17.6±0.4
66
90
4000
200
20
1750
–
Diesel fuel for
motor vehicles
(EN590
Specifications)1.9 Multijet
188B2000
Diesel
4 in line
2
82 x 90.4
1910
18±1
74
100
4000
260
26.4
2000
–
Diesel fuel for
motor vehicles
(EN590
Specifications) 1.4
8V◊)
350A1000
Otto
4 in line
2
72 x 84
1368
11±0.2
57
77
6000
115
11.7
3000
NGK ZKR7A-10
Unleaded petrol
95 RON (EN228
Specifications)1.4
16V
843A1000
Otto
4 in line
4
72 x 84
1368
11±0.2
70
95
5800
128
13
4500
NGK ZKR7A-10
Unleaded petrol
95 RON (EN228
Specifications)
ENGINE
GENERAL FEATURES
Engine code
Cycle
Number and layout of cylinders
Valves per cylinder
Piston bore and stroke mm
Total displacement cm3
Compression ratio
Maximum power (EEC) kW
HP
corresponding ratio: rpm
Maximum torque (EEC) Nm
kgm
corresponding ratio: rpm
Spark plugs
Fuel
◊) Engine model provided for certain versions/markets only

Modifications or repairs to the fuel system that are not carried out properly or do not take the
system’s technical specifications into account can cause malfunctions leading to the risk of fire.
(◊)Engine model provided for certain versions/markets only
1.48V(◊)-1.416V
Multipoint sequential phased electronic injection,
returnless system
TRANSMISSION
Gearbox
Clutch
Drive1.4
8V(◊)-1.3 Multijet -
1.9 Multijet
Five forward gears and reverse
with synchromesh for forward
gear engagement
Hydraulic control, self-adjust-
ing without travel-free pedal
Front
323
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARDAND CONTROLS
SAFETY
DEVICES
ACORRECT
USE OF
THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
1.416VDual FuNction -
1.3 Multijet Dual FuNction
System
Five forward gears and reverse,
electrohydraulic system with elec-
tronic control
Electric-hydraulic device
with electronic control
Front1.416V
Five or six forward gears and
reverse with synchromesh for
forward gear engagement
Hydraulic control, self-adjust-
ing without travel-free pedal
Front
FUEL FEED/IGNITION
Fuel feed
1.3 Multijet - 1.9 Multijet
Direct injection with electronically controlled
Multijet “Common Rail” with turbosupercharger
and intercooler

1.3 Multijet 90HP - 1.9 Multijet
Disc, self-ventilating (287 mm x 22mm)
Drum type (228mm)
Controlled by hand lever, working
on rear brakes
324
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARDAND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
BRAKES
Service brakes:
– front
– rear
Parking brake
IMPORTANT Water, ice and antifreeze salt on roads may deposit on the brake discs thus reducing braking efficiency at first braking. 1.4
8V(◊)-1.416V- 1.3 Multijet 70HP
Disc, self-ventilating (257 mm x 22mm)
Drum type (203 mm)
Controlled by hand lever, working
on rear brakes
SUSPENSIONS
Front
Rear1.4
8V(◊)-1.416V- 1.3 Multijet - 1.9 Multijet
Mc Pherson independent wheels
Interconnected wheels with twisting axle
STEERING
Type
Minimum steering
cycle m
(◊) Engine model provided for certain versions/markets only1.4
8V(◊)-1.416V- 1.3 Multijet - 1.9 Multijet
Rack and pinion with electric power steering
10.0