2007 Lancia Musa Pressure

315
WARNING
LIGHTS AND
MESSAGES
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
ADVICE FOR PRESERVING THE BODYWORK
Paint
Paintwork does not only serve an aestethic purpose,
but also protects the underlying sheet metal.
In the case of deep scrapes or scores, you are
advised to have the necessary touching up carried
out immediately to avoid the formation of rust. Use
only original paint products for touching up (see
“Bodywork paint identification plate” in section
“Technical specification”).
Normal paint maintenance consists in washing at
intervals depending on the conditions and
environment of use. For example, in highly polluted
areas, or if the roads are sprayed with salt, it is wise
to wash the car more frequently.
To correctly wash the car:
❒remove the aerial from the roof to prevent
damage to it if the car is washed in an automatic
system;
❒wash the body using a low pressure jet of water;
❒wipe a sponge with a slightly soapy solution over
the bodywork, frequently rinsing with the
sponge;
❒rinse well with water and dry with a jet of air or
a chamois leather.
When drying, take particular care with the less
visible parts like door surrounds, bonnet and
around the headlights where water may stagnate.
The car should not be taken to a closed area
immediately, but left in the open so that residual
water can evaporate.
Do not wash the car after it has been left in the sun
or with the bonnet hot: this may alter the shine of
the paintwork.
Exterior plastic parts must be cleaned in the same
way as the rest of the vehicle.
Where possible, do not park under trees; the
resinous substance many species release give the
paint a dull appearance and increase the possibility
of triggering rust processes.
IMPORTANT Bird droppings must be washed off
immediately and thoroughly as the acid they
contain is particularly aggressive.
Detergents cause water pollution. Therefore the car should be washed in areas equipped for
collecting and purifying the liquid used in the washing process.

COLD TYRE INFLATION PRESSURE (bar)
328
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARDAND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
STANDARD TYRES
Size Medium load Full load
Front Rear Front Rear
185/65 R14 86T 2,2 2,1 2,3 2,3
195/60 R15 88T 2,2 2,1 2,3 2,3
205/50 R16 87V 2,2 2,1 2,3 2,3
135/80 B14 84M 2,8SPARE WHEEL
125/80 R15 95M 4,2
Add +0.3 bar to the prescribed inflation pressure when the tyres are warm. Recheck pressure value with cold tyres.
With snow tyres, add +0.2 bar to the inflation pressure value prescribed for standard tyres.

340
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
DASHBOARDAND CONTROLS
INDEX
Suspensions ......................... 324
Symbols .............................. 8
Technical specifications.. 318
Third brake light
– bulb replacement ........... 276
Towing the car..................... 287
Towing trailers .................... 203
T.P.M.S. (system)................. 145
Transmission ....................... 323
Transporting children
safely ................................. 165
Tyre Pressure Monitoring
System (T.P.M.S.) .............. 145
Ty r e s
– correct tyre reading......... 325
– snow tyres....................... 327
– standard ......................... 327
Using the Dual FuNction System
gearbox ............................. 189
Warning lights and
messages.......................... 209
Weights ............................... 331Wheel
– changing ........................ 261
– spare wheel ..................... 327
Wheel geometry .................. 325
Windows (cleaning) ............. 316
Windscreen washer
– control ............................ 104
– fluid level ....................... 302
Windscreen wiper
– blades ............................ 311
– control ........................... 104
– nozzles ............................ 313
– smart washing ............... 105

ENGINE OIL CHANGE COLD TYRE INFLATION PRESSURE (bar)
STANDARD TYRES
Size Medium load Full load
Front Rear Front Rear
FUEL CAPACITIES (litres)
1.48V - 1.416V1.3 Multijet 1.9 Multijet
Tank capacity 47 47 47
Reserve 5 - 7 5 - 7 5 - 7
Refuel petrol engines with unleaded petrol with an octane rating (RON) no lower than 95 only.
Refuel diesel engines with diesel fuel for motor vehicles (EN590 specifications) only.
Fiat Auto S.p.A.
Quality - Assistenza Tecnica - Ingegneria Assistenziale
Largo Senatore G. Agnelli, 5 - 10040 Volvera - Torino (Italia)
Print no. 603.81.169 - 01/2007 - 1
stedition
1.418V1.416V1.3 Multijet 1.9 Multijet
litres kg litres kg litres kg litres kg
Engine sump 2.4 2.1 2.5 2.2 2.85 2.5 4.2 3.75
Engine sump and filter 2.62.25 2.7 2.35 3.0 2.6 4.4 3.9
185/65 R14 86T 2,2 2,1 2,3 2,3
195/60 R15 88T 2,2 2,1 2,3 2,3
205/50 R16 87V 2,2 2,1 2,3 2,3
135/80 B14 84M 2,8SPARE WHEEL
125/80 R15 95M 4,2
Add +0.3 bar to the prescribed inflation pressure when the tyres are warm. Recheck pressure value with cold tyres.
With snow tyres, add +0.2 bar to the inflation pressure value prescribed for standard tyres.