Page 190 of 346

USING THE DUAL FUNCTION SYSTEM
GEARBOX (where provided)
The car may be fitted with a mechanical transmission with electronic
control called “Dual FuNction System” that features two operating
modes: MANUAL and AUTO. This gearbox includes a conventional
mechanical transmission to which an electronically-operated
electrohydraulic device has been added which controls automatically
the clutch and gear engagement.
HOW TO MOVE OFF
Manual mode
❒Press the brake pedal
❒Start the engine
❒Move the gear lever A to + UP to engage the first gear or to R to
engage reverse
❒Release the brake pedal and press the accelerator pedal
❒When running move the gear lever A to + UP for upshifting or to –
(DOWN) for downshifting.
Automatic mode
❒ Press the brake pedal
❒Start the engine
❒Move the gear lever A to A/M to engage the automatic mode or to R
to engage reverse
❒Release the brake pedal and press the accelerator pedal.
189
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
L0D0332m
L0D0333m
Page 191 of 346
OPERATION
The gearbox can work in two operating modes:
❒the first mode is manual (MANUAL): the driver directly requests
gearshifting;
❒the second mode is automatic (AUTO): the system directly decides
when shifting gears. With this operating logic it is possible to
activate the ECO (Economy) function to contain consumption by
pressing button E on the gearbox mask.
To shift gears and to select the operating mode (MANUAL or AUTO)
use the gear lever A set on the central console (see figure).
190
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
L0D0332m
L0D0334m
Page 192 of 346
GEAR LEVER
The gear lever A is located on the dashboard and it is of the floating
“multi-stable position” type, i.e.: it features three stable positions and
three unstable ones.
The three stable positions correspond to neutral N, reverse R and
central position set between the unstable positions UP (+) and DOWN
(–) (see figure).
Unstable positions (i.e.: positions abandoned as soon as the gear lever
is released), are the upshifting position UP (+), the downshifting
position DOWN (–) and the automatic mode position A/M.
191
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
L0D0332m
Page 193 of 346
To return to manual mode, set the gear lever back to A/M.
With the car stationary and the key removed, it is possible to shift the
lever with/without the brake pedal pressed. The system will perform
no actuation when shifting the lever and the gear engaged will be the
one stored before removing the ignition key.
IMPORTANT With the engine off and the car stationary, any error
between lever position and gear engaged is indicated by warning light
(è) coming on for a few seconds on the instrument panel together
with the message on the multifunction display.
192
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
L0D0333m
Page 194 of 346
MANUAL OPERATION (MANUAL)
In this operating mode, the decision to change gear
is left to the driver who decides the most
appropriate moment.
To change gears in MANUAL operating mode
proceed as follows:
❒move lever to + (UP) to engage higher gear;
or
❒move lever to – (DOWN) to engage lower gear.
The system will cut in automatically preventing
gearshifting only if the request to change gear will
impair regular engine and transmission operation;
the system will also shift down gears automatically
when the engine (e.g.: at slowing down).The system will warn the driver that the required
gear will not be engaged through the sound of the
buzzer and a dedicated message on the
multifunction display (see paragraph “Warning
lights and messages”).
193
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
Page 195 of 346
AUTOMATIC OPERATION (AUTO)
For engaging/disengaging the automatic operating mode (AUTO),
move lever A to A/M: automatic mode activation is indicated by
message AUTO and gear engaged on the display (see figure).
With AUTO mode active, the system decides to change gear
depending on car speed, engine rpm and how the accelerator pedal is
pressed. It is however possible to change gears with the control lever
without deactivating the automatic mode: this function called “gear
advice” suspends the automatic mode for the time required to change
gear.
194
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
L0D1243g
L0D0333m
L0D0332m
Page 196 of 346
Automatic operation (AUTO - ECO)
The ECO function can be activated only with automatic mode active.
To activate the ECO function press button E set on the mask near the
gearshift lever. After activating this function, the display shows the
gear engaged and words AUTO and E (see figure).
With ECO function active the system will select the most suitable gear
(according to car speed, engine rpm and how the accelerator pedal is
pressed) to save as much fuel as possible.
If necessary (e.g.: overtaking) the system will change gears in order
to provide suitable torque and power for acceleration (this will take
place in automatic mode regardless of ECO function condition, ON or
OFF).
195
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
L0D1244g
L0D0334m
Page 197 of 346
ENGAGED GEAR DISPLAYING
One second after turning the ignition key to MAR, the gear engaged
and the last operating mode adopted (AUTO or MANUAL) will be
displayed on the display:
N = neutral;
1 = first gear;
2 = second gear
3 = third gear;
4 = fourth gear;
5 = fifth gear;
R = reverse.
If the ECO function is on, the display will show E (Economy) next to
the gear engaged.
IMPORTANT If after 10 seconds (with ignition key to MAR) the
display does not show the gear engaged, turn the ignition key to
STOP and wait for the display to turn off, then repeat system switch
on. If the fault persists, contact Lancia Dealership.
196
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
L0D1243g
L0D1244g