8
CONSUMER INFORMATION
5
!
SI060D3-E
WHEEL REPLACEMENT
The original wheels may only be re-
placed with Hyundai Approved wheels.
Tyres of different size, construction or
tread pattern should not be intermixed on the same axle. Radial and cross plytyres should not be used on the same vehicle.
The use of tyres and wheels of non
approved sizes can be dangerous.
WARNING:
o Driving on worn or defective tyres is dangerous. Worn tyres may cause loss of steering control and a serious deterioration of braking efficiency. Defective tyresmay cause vibration and loss of control through blow outs.
o Your vehicle is equipped with tyres designed to provide for saferide and handling capability. Do not use a size and type of tyre and wheel that is different from the one that is originally installedon your vehicle.
SI060B1-E
TYRE REPLACEMENT
0.06 in.(1.6 mm)
Wear indicator I090A02FC
Tyres must be replaced when the wear
indicators appear as a solid bar across the tyre tread. At this point, the re- maining tread depth will be approxi- mately 0.06 in.(1.6 mm). In addition tothis, the tyre must be replaced if any portion of the tread has become bald or if there are any lumps, bulges ordeep cuts in the sidewalls or tread. Replacement tyres must be of the
recommended size and rating andshould be of the same manufacture and tread pattern on each axle.
It can affect the safety and perfor- mance of your vehicle, whichcould lead to handling failure or rollover and serious injury. When replacing the tyres, be sure to equip all four tyres with the tyre and wheel of the same size,type, tread, brand and load-carry- ing capacity. If you nevertheless decide to equip your vehicle withany tyre/wheel combination not recommended by Hyundai for off- road driving, you should not usethese tyres for highway driving.
o Tyres degrade over time, even
when they are not being used.Regardless of the remaining tread, it is recommended that tyres gen- erally be replaced after six (6)years of normal service. Heat caused by hot climates or fre- quent high loading conditions canaccelerate the aging process. Failure to follow this warning can result in sudden tyre failure, whichcould lead to a loss of control and an accident involving seri- ous injury or death.
fcuk-8.p65 12/27/2006, 10:17 AM
5
9 VEHICLE SPECIFICATIONS
2
J010A01FC-EAT MEASUREMENT
158.4 (4,025)68.5 (1,740) 64.3 (1,635)
*66.3 (1,685)
102.3 (2,600) 58.5 (1,485)58.5 (1,485)
Overall lengthOverall width Overall height (unladen) Wheel base Wheel tread
Front
Rear
Type Wheel free playRack stroke Oil pump type Rack and pinion0 ~ 1.18 in. (0 ~ 30 mm) 5.7±0.04 in. (146±1mm)Vane type
SJ030A1-F FUEL SYSTEM
J020A01FC-EATPOWER STEERING J030A01FC-DATTIRE
185/65 R14 195/55 R15205/55 R15 (1.8 DOHC only)
StandardOption
J050A01FC-GAT BRAKE Dual hydraulic with brake booster Ventilated discDrum Cable
Type Front brake typeRear brake type Parking brake
Item Battery Generator
J040A02FC-EAT ELECTRICAL
Petrol
MF45AH
90A (13.5V)
in. (mm)
Fuel tank capacityLitre
55 US.gal
14.5 Imp.gal
12
Diesel
CMF 68 AH 120A (12V)
* If installed roof rack J030B01FC-EAT SPARE TYRE
Space-saver Full size
StandardOption
fcuk-9.p65
12/27/2006, 10:17 AM
2
