2007 HONDA ACCORD Engine

[x] Cancel search: Engine

Page 183 of 292

HONDA ACCORD 2007 CL7 / 7.G Owners Manual Driving with varying tire or wheel 
sizes may cause the VSA to
malf unction. When replacing tires,
make sure they are of the same size
and type as your original tires (see
page ). 
Deactivate the VSA

Page 184 of 292

HONDA ACCORD 2007 CL7 / 7.G Owners Manual Your vehicle has been designed 
primarily to carry passengers and
their cargo. You can also use it to
tow a trailer if you caref ully observe
the load limits, use the proper
equipment, and f ollow the

Page 189 of 292

HONDA ACCORD 2007 CL7 / 7.G Owners Manual Maketurnsmoreslowlyandwider 
than normal. The trailer tracks a
smaller arc than your vehicle, and it
canhitorrunoversomethingthe
vehicle misses. Allow more time and
distance f or braking. Do not brake

Page 191 of 292

HONDA ACCORD 2007 CL7 / 7.G Owners Manual All service items not detailed in this 
section should be perf ormed by a
certif ied technician or other qualif ied
mechanic. 
To eliminate potential hazards, read 
the instructions bef ore you begin,

Page 192 of 292

HONDA ACCORD 2007 CL7 / 7.G Owners Manual µ
µ µµµµµµµµ µ
µ
CONT INUED
Calculated Engine Oil Lif e (%)
100 % 91 % 90 % 81 %
80 % 71 %
70 % 61 %
60 % 51 %
50 % 41 %
40 % 31 %
30 % 21 %
20 % 16 %
15 % 11 %10 % 6 % 5% 1% 0

Page 193 of 292

HONDA ACCORD 2007 CL7 / 7.G Owners Manual If the remaining engine oil lif e is 15 
to 6 percent, you will see the engine
oil lif e indicator every time you turn
the ignition switch to the ON (II)
position. The maintenance minder
indicator wil

Page 194 of 292

HONDA ACCORD 2007 CL7 / 7.G Owners Manual µ
The maximum total mileage shown 
is ‘‘ 9999.’’
When the remaining engine oil lif e is
0 percent, the engine oil lif e indicator
will blink. The display comes on
everytimeyouturntheignition

Page 195 of 292

HONDA ACCORD 2007 CL7 / 7.G Owners Manual Turn the ignition switch to the ON 
(II) position.
If maintenance service is done by
someone other than your dealer,
reset the maintenance minder as
f ollows:
Press the selec t/ reset kno b until
the