2007 GMC YUKON center console

9
Adjustable Pedals (if equipped)
The accelera
tor and brakepedals canbe adjusted
to a comfortable and safeoperatingposition byusing the switch located on the centerconsole below the climate controls.
Press the top arrow on the switch to
move the pedals away from you andpress the bottom arrow on the switch tomove the pedals toward you.
The pedals cannot be adjusted when the
vehicle is in Reverse or when cruisecontrol is activated.
See Section 3 of your Owner Manual.
To help block the glare of the sun, the
sun visor can be detached from the cen
ter mount and moved along the sliderod.
See Section 2 of your Owner Manual.
The climate control system includes the
following functions:
(Fan):Turn the fan control knob to
increase or decrease fan speed.
(Off):Turn the fan knob to the Off
position to turn off the system.
(Air Conditioning):Press this but
ton to turn the air conditioning system
on or off.
Sun Visor Adjustment
Manual Climate Controls(Recirculation):
Press this button
to recirculate inside air through the vehi
cle. This mode keeps outside air fromentering the vehicle.
Temperature Control:Rotate the
thumbwheels to raise or lower the temperature setting(s).
AUX (Rear Climate Control):Press this
button to turn the rear climate control
system on or off.
Airflow Modes
Turn the airflow control knob to change
the direction of the airflow. The knob canbe positioned between two modes for awide range of airflow adjustments.
(Vent):This mode directs air to the
instrument panel outlets.
(BiLevel):This mode directs air to
the instrument panel outlets and flooroutlets.
(Floor):This mode directs most of
the air to the floor outlets and some air
to the side window outlets and windshield. Recirculation cannot be selectedin this mode.
(Defog):This mode directs air to
the windshield, floor outlets and sidewindow outlets. Recirculation cannot beselected in this mode.
(Defrost):This mode directs most
of the air to the windshield and some airto the side window outlets. Recirculationcannot be selected in this mode.
(Rear Window Defogger):Press
this button to activate the rear window
defogger. The defogger will shut offautomatically or can be turned off by
pressing the button again.
See Section 3 of your Owner Manual.

Getting to Know YourYukon/Yukon Denali20
(Dome Lamp Override):Press this
button to turn the dome lamps on or offwhen the doors are open.
See Section 3 of your Owner Manual.
The 2ndrow seats fold and tumble to
provide more cargo space and access tothe 3rdrow seats.
To fold and tumble the seat:
1. Make sure nothing is under or in front
of the seat.
2. Fold the seatback forward by lifting
the release lever located at the bot
tom rear of the seatback on the out
board side of the seat.
3. Tumble the seat forward by lifting the
release lever again.
To unfold the seat:
1.Pull down the seat until it latches to
the floor.
2.Lift up the seatback until it locks in
place. Pull on the seatback to makesure it is locked.
Power Release Seats (if equipped)
To fold and tumble the power release
seat:
1. Shift the vehicle into Park.
2. Make sure nothing is under or in front
of the seat.
3. Press one of
the automatic
release buttons, located
on the overhead consoleand on the panel behind the rear
doors. The seat will fold and tumble
forward automatically.
The seat must be unfolded manually to
return it to the sitting position.
See Section 1 of your Owner Manual.
The split rear seats fold and tumble to
provide more cargo space.
To fold and tumble the seat:
1. Make sure nothing is in front of the
seat.
2. Fold the seatback forward by lifting
the release lever (A) located at thebottom rear of the seatback on theoutboard side of the seat.
3.Tumble the seat forward by lifting the
release lever (B) located to the left of
the handle on the center rear of theseat.
4. Tilt the seat fully forward and lock it in
place.
To unfold the seat:
1.Lower the seat by lifting the release
lever located to the left of the handleon the center rear of the seat.
Folding 2ndRow Seats
Folding 3rdRow Seats
BA

21
2. Pull down the seat until it latches to
the floor.
3. Lift up the seatback until it locks in
place. Pull on the seatback to makesure it is locked.
See Section 1 of your Owner Manual.
Use the Remote Keyless Entry (RKE)
transmitter or the power door lockswitches to unlock the liftgate.
Liftgate:Press the touchpad (A) on
the back of the handle in the center ofthe liftgate; then pull up the liftgate toopen it.
Liftglass:Press the touchpad (B) on the
liftgate, located above the right side ofthe license plate, or use the RKE trans
mitter to unlatch the liftglass.
Power Liftgate (if equipped)
There are several ways to open and
close the power liftgate:
• Press and hold the power liftgate but
ton on the RKE transmitter until theliftgate starts moving.
• Press the touchpad on the liftgate
handle to open.
• Press the button on the bottom of the
liftgate to close.
•Press the (Power Liftgate) switch
on the overhead console inside thevehicle.
To turn off the power liftgate function,
press the (Power Liftgate Off) switchon the overhead console.
See Section 2 of your Owner Manual.
The open/close and vent switches for
the power sunroof are located on the
overhead console. The open/closeswitch has two detents.
(ExpressOpen):Press the rear of
this switch completely (to the second
detent) to expressopen the sunroof. Tostop the sunroof, press the switch again.
To partially open the sunroof, lightly
press and hold the rear of the switch (tothe first detent) until the sunroof reachesthe desired position.
(ExpressClose):Press the front of
this switch completely (to the seconddetent) to expressclose the sunroof. To
stop the sunroof, press the switch again.
To partially close the sunroof, lightly
press and hold the front of the switch (tothe first detent) until the sunroof reachesthe desired position.
(Vent): Press the rear of this switch
to vent the sunroof. Press the switchagain to stop the sunroof.
Press and hold the front of the switch
toclose the sunroof.
See Section 2 of your Owner Manual.
Liftgate and Liftglass Operation
AB
Sunroof (if equipped)