2007 GMC YUKON display

Getting to Know YourYukon/Yukon Denali14
With the indash 6Disc CD Player, note
that you cannot directly load a CD as insingleplay systems.
To load a single CD:
• Press and release the LOAD
button. Wait for the display promptbefore loading the CD.
To load multiple CDs:
• Press and hold the LOAD button
for two seconds. Follow the displayprompts to load each CD. Press theLOADbutton again to cancel
loading more CDs.
To play a specific CD:
• Press the pushbutton below the arrow
label on the display to select thedesired CD number.
To eject a CD:
• To eject the CD that is currently
playing, press the EJECT buttononce.
•To eject all CDs, press and hold the
EJECTbutton for two seconds.
If a CD is not removed after several sec
onds, it will automatically be pulled back
into the player.
See Section 3 of your Owner Manual.
Your vehicle’s Navigation Entertainment
System provides you with detailed mapsof all major highways and roadsthroughout the United States. After you
enter a destination, the system providesturnbyturn instructions for reachingyour destination. In addition, the systemcan help you locate a variety of points of
interest, such as banks, airports, restaurants and more.
See your Navigation Entertainment
System Owner Manual for operatinginstructions.
See Section 3 of your Owner Manual.
MultipleDisc CD Player
(if equipped)Note:CDs with any affixed labels may
jam in the CD player. Label a CD using
a permanent marker. If more than oneCD is inserted into the slot at one time,or if scratched or damaged CDs are
played, the CD player could be dam
aged. When using the CD player, useonly CDs in good condition withoutlabels; load one CD at a time; and keepthe CD player and the loading slot freeof foreign materials, liquids or debris.
Touch Screen Navigation
Entertainment System (if equipped)
XM Satellite Radio (if equipped)
XM Satellite Radio offers more than 170
channels of digitalquality sound thatgoes wherever you go — coast to coast.
XM displays song title, artist and entertainment genre.

15
Rear Seat Audio
The Rear Seat Audio (RSA) system
allows front seat and rear seat passen
gers to listen to different entertainmentsources at the same time using the rearseat controls and wired (not supplied) orwireless headphones. The vehicle’s rear
speakers may be muted when the rear
control panel is turned on.
•To select an entertainment source —
radio, CD or DVD (if equipped) —
press the SRCE (Source) button.
• Turn the left volume knob to adjust
the volume of the left wired headphones and the right volume knob toadjust the volume of the right wiredheadphones.
Rear Seat Entertainment (DVD)
The Rear Seat Entertainment (RSE)
system has all of the functions of the
RSA system, with the added features ofa CD/DVD player as part of the front
radio, a flipdown video screen, wirelessheadphones and a remote control.
To play a DVD:
1. Turn the ignition to the Accessory or
Run position.
2. Push the release button on the DVD
display console and pull down thevideo screen.
3. Insert a DVD into the DVD slot in the
radio. It will turn on the video screen
and begin playing automatically. Itmay be necessary to press the Playbutton on the RSE system or theremote control to start playing themovie if the DVD stops at a menuscreen.
4. To listen to the DVD through the vehi
cle speakers, press the DVD/CD AUXbutton. Adjust volume using the radio
volume control.
To listen to the DVD through the wire
less headphones, select channel 1and push the power button on the
headphones. Adjust volume using theheadphone volume control.
5. To control DVD playback, use the
remote control or the buttons underthe labels on the front radio display.
6.To turn off the RSE system, press the
front radio’s power button for two seconds, eject the DVD, or press thepower button on the remote control.See Section 3 of your Owner Manual.
Rear Seat Audio and DVD Rear
Seat Entertainment Systems (if equipped)
Note:Aim the remote control at the
video screen, not the DVD player,
for proper operation.
Activation fee and service subscription
are extra. Service is based in thecontinental United States and Canada.For more information, visit XM online
at www.XMradio.com or call 1800852XMXM (9696).
See Section 3 of your Owner Manual.

Getting to Know YourYukon/Yukon Denali16
Automatic Dimming Rearview
Mirror with Compass and
Temperature Display (ifequipped)
Automatic Dimming
The automatic dimming feature is turned
on each time the vehicle is started. To
turn the feature off or back on, press
and hold the (On/Off) button forapproximately six seconds.
Compass and Temperature Display
Operation
To turn the compass and temperature
display on or off, briefly press the On/Offbutton.
To switch between Fahrenheit and
Celsius readings:
1. Press and hold the On/Off button for
approximately four seconds until thedisplay flashes F or C.
2.Briefly press the On/Off button again
to select Fahrenheit or Celsius. Your
selection will be set once the displaystops blinking.
To adjust for compass variance when
traveling on a longdistance trip or tocalibrate the compass, refer to yourOwner Manual.
See Section 2 of your Owner Manual.
CONVENIENCE
A number of audio controls can be
adjusted at the steering wheel.
+ – (Volume):Pull up on the + or – but
ton to increase or decrease the volume.
(Next/Previous):Press the up or
down arrow to go to the next or previous
radio station stored as a favorite or,when a CD is playing, to the next orprevious track.
SRCE (Source): Press this button
toswitch between AM, FM, XM (if
equipped), CD and AUX.
(Seek):Press this button to go to
the next radio station.
(
Mute/Voice Recognition):Press
this button to silence the system. Pressthe button again to turn on the sound.
Press and hold the button for one sec
ond to interact with the OnStar system.
See Section 3 of your Owner Manual.
Audio Steering Wheel Controls
(if equipped)

19
Press the (Heated Washer Fluid)
button, located below the climate controls on the instrument panel, to sprayheated washer fluid on the windshield.This will help to clear ice, tree sap orbugs from the windshield. A light on the
switch will flash while the washer fluid is
heating, which may take up to 40 seconds. The wipers will automatically turn
on for four cycles or until the button ispressed again.
See Section 3 of your Owner Manual.
The rear vision camera displays a view
of the area behind the vehicle on thenavigation screen when the vehicle isshifted into Reverse. Once shifted out ofReverse, the navigation screen willreturn to the last screen displayed afterapproximately 10 seconds.
To turn the camera on or off:
1.Shift into Park.
2. Press the Menu hard key to enter the
Menu options.
3.Press the Menu hard key to select
Display, or touch the Display screenbutton.
4. Touch the Rear Camera Options
screen button.
5.Touch the Rear Camera Image in
Reverse screen button.
To clean the camera lens, located above
the license plate, rinse it with water andwipe it with a soft cloth.
See Section 2 of your Owner Manual.
Your vehicle is equipped with an
Automatic Headlamp System, which
turns on the Daytime Running Lamps
(DRL) during the day and the head
lamps and other exterior lamps at night
or when necessary.
The system uses a light sensor, located
on top of the instrument panel, to determine light conditions. For proper systemoperation, avoid placing any objects on
or near the sensor.
Exterior Lamp Controls
The exterior lamps control knob is locat
ed on the instrument panel to the left ofthe steering wheel.
(Off):When operating in the AUTO
position, a momentary turn of the knob
to the Off position will turn off theAutomatic Headlamp System and allexterior lights, excluding the DRLs.
AUTO (Automatic):Automatically turns
on the DRLs in the daytime and theAutomatic Headlamp System at night or
when necessary.
(Parking Lamps):Manually turns
on parking lamps and taillamps.
(Headlamps):Manually turns on
the headlamps and other exterior lamps.
(Fog Lamps)(if equipped): Press
this button to turn the fog lamps on or
off.
Heated Windshield Washer Fluid
(if equipped)
Rear Vision Camera
(if equipped)
Automatic Headlamp System

Getting to Know YourYukon/Yukon Denali22
This feature uses ultrasonic sensors on
the rear bumpers to help you avoid col
liding with objects when parking the
vehicle. It operates only at speeds lessthan 3 mph.
The rear parking assist display is locat
ed near the rear window. The lights onthe display provide distance information.Lowtoned beeps play out of the rearspeakers (for objects near the rearbumper).
To turn off the system, press the disable
button located below the climate con
trols on the instrument panel. The indi
cator light will illuminate when the system is off.
See Section 3 of your Owner Manual.
The Universal Home Remote is a com
bined universal transmitter and receiverthat can activate up to three devices,such as garage door openers, entrydoor locks, gates and security systems.
It’s recommended that you read the
instructions in your Owner Manual com
pletely before attempting to program anyof the three channels on the Universal
Home Remote. The engine should be
turned off when programming theremote.
See Section 2 of your Owner Manual.
Ultrasonic Rear Parking Assist
(if equipped)
StabiliTrak is an advanced computer
controlled vehicle stability and tractionenhancement system that assists withdirectional control of the vehicle in
difficult driving conditions. It turns onautomatically every time you start your
vehicle.To limit wheelspin and help maintain directional control, you shouldalways leave the system on. However, if
your vehicle becomes stuck and rocking
StabiliTrak®– Stability Control
System (if equipped)
PERFORMANCE & MAINTENANCE
Universal Home Remote
(if equipped)
Note: Do not use the Universal Home
Remote with any garage door opener thatdoes not have the “stop and reverse” fea
ture or any opener manufactured beforeApril 1, 1982.
6Speed Automatic
Transmission Controls (Denali Models only)
The 6speed automatic transmission has
a unique gear range selection modecalled Driver Shift Control that enablesthe driver to select the range of gearsdesired for the current driving conditions,such as when driving on downhill grades.
To use this feature, move the shift lever
to the Manual (M) position and select alower or higher driving gear using the
+ / – button on the shift lever. The dis
play on the instrument panel cluster will
show the current gear selection.
Press the – (minus) side of the button to
downshift. When slowing to a stop, thevehicle will automatically downshift.
Press the + (plus) side of the button to
upshift. As vehicle speed increases, youwill need to manually upshift.
If current vehicle speed is too high or
too low for the requested gear, the shift
will not occur.
See Section 2 of your Owner Manual.

23
the vehicle is required, the system
should be turned off.
To turn off the traction control part of the
system, press the (StabiliTrak) button located below the climate controlson the instrument panel.
To turn off the traction control and stabil
ity enhancement systems, press andhold the button for five seconds.
When the system is turned off, the
StabiliTrak light will illuminate.
See Section 4 of your Owner Manual.
The Tire Pressure Monitor alerts you
when a significant reduction in pressureoccurs in one or more of your vehicle’s
tires by illuminating the (Low Tire
Pressure) warning light, which will remain
on until you correct the tire pressure.You
may also have a CHECK TIRE PRESSURE message appear on the DIC (ifequipped).
Correcting the Tire Pressure
When the low tire pressure warning light
illuminates, you must fill the tire to the
proper tire inflation pressure. The Tireand Loading Information label shows thecorrect inflation pressure for the tireswhen they’re cold. “Cold” means yourvehicle has been sitting for at least threehours or driven no more than one mile.
You can temporarily remove the DIC mes
sage by acknowledging it with your DIC
controls. However, at the next vehiclestartup, the DIC message will reappear ifthe tire pressure has not been corrected.
During cooler conditions, the low tire
pressure warning light may appear whenthe vehicle is first started and then turn
Tire Pressure Monitor
off as you start to drive the vehicle. This
could be an early indicator that your tirepressures are getting low and need tobe inflated to the proper pressure.
See Section 5 of your Owner Manual.
The Oil Life System calculates engine oil
life based on vehicle use and displays
CHANGE ENGINE OIL in the Driver
Information Center (DIC) when it’s nec
essary to change your engine oil and fil
ter. The Oil Life System should be reset
to 100% only following an oil change.
Reset the Oil Life System using the DIC:
1. Turn on the ignition.
2. Press the (Vehicle Information)
button until the DIC displays OIL LIFEREMAINING.
3. Press and hold the (Set/Reset)
button until 100% is displayed.
4. Turn off the ignition.
Reset the Oil Life System without the DIC:
1. Turn on the ignition, with the engine off.
2. Fully press and release the accelera
tor pedal slowly three times withinfive seconds.
3.If the CHANGE ENGINE OILmes
sage flashes, the system is reset;
otherwise, repeat the procedure.
4.Turn off the ignition.
See Section 5 of your Owner Manual.
Resetting the Engine
Oil Life System
Note: The Tire Pressure Monitor can
alert you about low tire pressure, but itdoesn’t replace normal monthly tiremaintenance.