2007 GMC SIERRA CLASSIC heater

[x] Cancel search: heater

Page 113 of 674

GMC SIERRA CLASSIC 2007  Owners Manual Keys............................................................ 115
Remote Keyless Entry System.................. 116
Remote Keyless Entry System
Operation............................................

Page 139 of 674

GMC SIERRA CLASSIC 2007  Owners Manual When starting your engine in very cold weather
(below 0°F or−18°C), do this:
1. With your foot off the accelerator pedal, turn
the ignition key to START and hold it there up
to 15 seconds. When th

Page 140 of 674

GMC SIERRA CLASSIC 2007  Owners Manual 3. Plug it into a normal, grounded 110-volt AC
outlet.
{CAUTION:
Plugging the cord into an ungrounded
outlet could cause an electrical shock.
Also, the wrong kind of extension cord
could overheat and

Page 146 of 674

GMC SIERRA CLASSIC 2007  Owners Manual Low Traction Mode
(Allison Transmission®)
If your vehicle has the DURAMAX®diesel engine
and the Allison Transmission®,ithasaLow
Traction Mode that assists in vehicle acceleration
when road conditio

Page 243 of 674

GMC SIERRA CLASSIC 2007  Owners Manual Rear Window Defogger
If your vehicle has this feature, the rear window
defogger uses a warming grid to remove fog from
the rear window.
If your vehicle has a sliding rear window, you will
not have a r

Page 406 of 674

GMC SIERRA CLASSIC 2007  Owners Manual You will need a well-charged battery to restart the
vehicle, and possibly for signaling later on with
your headlamps. Let the heater run for a while.
Then, shut the engine off and close the window
alm

Page 473 of 674

GMC SIERRA CLASSIC 2007  Owners Manual Fuel E85 (85% Ethanol)
The 8th digit of your Vehicle Identi�cation Number
(VIN) shows the code letter or number that
identi�es your engine. You will �nd the VIN at
the top left of the instrument panel

Page 502 of 674

GMC SIERRA CLASSIC 2007  Owners Manual How to Check and Add Fluid
The proper �uid should be added if the level does
not reach the bottom of the diaphragm when it
is in place in the reservoir. See the instructions on
the reservoir cap.
Engi
Page:   1-8 9-16 next >