206-04-9 Rear Disc Brake 206-04-9
REMOVAL AND INSTALLATION
7. Remove the brake pads.
8. Remove the brake caliper anchor plate.
Installation
I. Using the special tool, retract the brake
caliper piston.
2.
N0TE:Make sure that the brake pad contact
points are clean and free from contamination.
To install, reverse the removal procedure. 3.
Bleed the brake system. For additional
information, refer to: (206-00 Brake System
- General Information)
Brake System Bleeding (General
Procedures),
Brake System Pressure Bleeding (General
Procedures).
-- - - -
2006.0 Fiesta 1212006 G427696en
procarmanuals.com
206-0516 Parking Brake and Actuation 206-05-6
DIAGNOSIS AND TESTING
TEST CONDITIONS
A2: CHECK FOR WORN BRAKE SHOES OR PADS
rn Inspect the brake shoes or pads for excessive
wear.
REFER to: Specifications (206-00, Specifica-
tions)
I Brake Shoes (206-02 Drum Brake, Removal
and Installation)
I Brake Pads (206-04, Removal and Installation).
Are the brake shoe linings or brake pads OK?
+ Yes
GO to A3.
+ No
INSTALL new brake shoes or pads.
REFER to: Brake Shoes (206-02 Drum Brake,
Removal and Installation)
I Brake Pads (206-04, Removal and Installa-
tion).
TEST the system for normal operation.
A3: CHECK FOR DAMAGED PARKING BRAKE CABLES
lnspect the parking brake cables and conduits
for damage, rust or fraying.
Are the parking brake cables and conduits OK?
+ Yes
CHECK for other causes such as loose
parking brake control or conventional brake
system components.
+ No
REPAIR or INSTALL cables and conduit as
necessary. TEST the system for normal
operation.
2006.0 Fiesta 1212006 GI 7495en
procarmanuals.com
