2007 FORD FIESTA 206-04

206-04-2 Rear Disc Brake 206-04-2
SPECIFICATIONS
Lubricants, Fluids, Sealers and Adhesives
Item Specification
ESD-M6C57-A
Brake Disc S~ecification
I Description I mm I
Brake disc diameter
New brake disc nominal thickness
I Worn brake pad discard thickness* I 1.50 1
280
10.15
Worn brake disc discard thickness*
Maximum brake disc thickness variation
I Brake caliper piston diameter I 34 I
8
0.02
I *When the discard thickness has been reached, install a new brake disdbrake pads.
-spindle retaining bolts I 66 I 49 I - I
Torque Specifications
I Brake caliper anchor plate retaining bolts I 60 I 44 I - I
I Brake caliper retaining bolts I 35 I 26 I - I
Ib-in Item
I Brake.tube to brake caliper union I 15 I 11 I - I
2006.0 Fiesta 1u2oo6 G427692en
Nm Ib-ft
procarmanuals.com

206-04-3 Rear Disc Brake 206-04-3
DESCRIPTION AND OPERATION
Rear Disc Brake
Rear Wheel Hub and Disc Brake Assembly
Item Description Item Description
I 1 I Beam axle
2
3
I plate assembly
2006.0 Fiesta 1212006 G427693en
5
Brakediscshield
Brake caliper and brake caliper anchor
4
Wheel hub retaining nut
8
Dust cap
6
7
Wheel speed sensor ring
Brake disc
Wheelhub
9 Wheel
spindle
procarmanuals.com

206-04-4 Rear Disc Brake 206-04-4
DESCRIPTION AND OPERATION
Brake Caliper and Brake Caliper Anchor Plate Assembly
r 3 1 Brake caliper I
Item Description
2006.0 Fiesta 1~2006 G427693en
1
2
Brake caliper anchor plate
Brake pads
procarmanuals.com

206-04-5 Rear Disc Brake 206-04-5
DIAGNOSIS AND TESTING
Rear Disc Brake
' REFER to: Brake System (206-00 Brake System
- General Information, Diagnosis and Testing).
2006.0 Fiesta 1212006 G427694en
procarmanuals.com

206-04-6 Rear Disc Brake 206-04-6
REMOVAL AND INSTALLATION
Brake Pads(l2 238 0)
Special Tool(s) Detach the brake caliper from the brake (
I Retractor, Rear Brake Caliper I caliper anchor plate.
Piston
206-0
1 2
Materials
Name Specification
Removal 5. Remove the brake pads.
Brake Fluid - Super
I DOT4
A CAUTI0N:lf brake fluid is spilt on the
paintwork, the affected area must be
immediately washed down with cold water.
ESD-M6C57-A
1. Release the parking brake.
2. Remove the wheel and tire.
For additional information, refer to: Wheel
and Tire (204-04 Wheels and Tires, Removal
and Installation).
3. Detach the brake hose from the brake hose
support bracket.
Installation
1. CAUTIONS:
n~hen the brake caliper piston is retracted
into the brake caliper piston housing, brake
fluid will be displaced into the brake fluid
reservoir.
Asupport the brake caliper during brake
caliper piston retraction.
4m ACAUTION:S~~~~~~ the brake caliper to
prevent load being placed on the brake hose.
2006.0 Fiesta 1212006 G427695en
procarmanuals.com

206-0417 Rear Disc Brake 206-0417
REMOVAL AND INSTALLATION
Using the special tool, retract the brake
caliper piston.
2. N0TE:Make sure that the brake pad contact
points are clean and free from contamination.
To install, reverse the removal procedure.
3. Fully depress and release the brake pedal.
4. Check the fluid level in the brake fluid
reservoir and top up
if necessary with brake
fluid.
2006.0 Fiesta 1212006 G427695en
procarmanuals.com

206-04-8 Rear Disc Brake 206-04-8
REMOVAL AND INSTALLATION
Brake Caliper(l2 253 0) f
Special Tool(s) 4. Using a brake hose clamp, clamp the brake (
I Retractor, Rear Brake Caliper I hose.
General Equipment
I Brake hose clamp I
Materials
Name Specification
Brake Fluid - Super ESD-M6C57-A
DOT4 5n ~CAUTION:C~~ the brake hose to prevent
fluid loss or dirt ingress.
Removal Disconnect the brake tube from the brake
caliper.
A CAUTI0N:If brake fluid is spilt on the
paintwork, the affected area must be
immediately washed down with cold water.
I. Release the parking brake.
2. Remove the wheel and tire.
For additional information, refer to: Wheel
and Tire (204-04 Wheels and Tires, Removal
and Installation).
3. Detach the parking brake cable from the
brake caliper.
I. Pull back the brake caliper lever.
2. Disconnect the parking brake cable from the
brake caliper lever.
6. Detach the brake caliper from the brake
3. Detach the parking brake cable from the caliper anchor plate.
brake caliper.
2006.0 Fiesta 1212006 G427696en
procarmanuals.com

206-04-9 Rear Disc Brake 206-04-9
REMOVAL AND INSTALLATION
7. Remove the brake pads.
8. Remove the brake caliper anchor plate.
Installation
I. Using the special tool, retract the brake
caliper piston.
2.
N0TE:Make sure that the brake pad contact
points are clean and free from contamination.
To install, reverse the removal procedure. 3.
Bleed the brake system. For additional
information, refer to: (206-00 Brake System
- General Information)
Brake System Bleeding (General
Procedures),
Brake System Pressure Bleeding (General
Procedures).
-- - - -
2006.0 Fiesta 1212006 G427696en
procarmanuals.com