2007 FORD FIESTA transmission

Automatic Transmission/Transaxle External
Controls -Vehicles With:
4Speed Automatic
Transmission
(AW81-40)
REMOVAL AND INSTALLATION
Selector Lever
Removal
1. Remove the floor console. 4. Remove the transmission selector lever.
2. Detach the selector lever cable from the
transmission selector lever.
1. Shift the selector lever to the "P" (PARK)
position.
2. Detach the selector lever cable.
3. Pull the selector lever cable locking pin and
detach the selector lever cable outer sleeve.
3.
Disconnect the transmission selector lever
electrical connector.
Installation
1. Install the transmission selector lever.
2. Connect the transmission selector lever
electrical connector.
3. Attach the selector lever cable to the
transmission selector lever.
2006.0 Fiesta 1212006 G294549en
procarmanuals.com

Automatic Transmission/Transaxle External
Controls -Vehicles With:
4Speed Automatic
307-05-1
1 Transmission (AW81-40) 307-05-1 1
REMOVAL AND INSTALLATION
1. Shift the selector lever to the "P" (PARK)
position.
2. Attach the selector lever cable outer sleeve.
3. Attach the selector lever cable.
4. Install the floor console.
5. Adjust the selector lever cable.
For additional information, refer to Selector
Lever Cable Adjustment
- in this section.
2006.0 Fiesta 1212006 G294549en
procarmanuals.com

Automatic Transmission/Transaxle External
Controls
- Vehicles With: 4-Speed Automatic
307-05-1
2 Transmission (AW81-40) 307-05-1 2
REMOVAL AND INSTALLATION
Selector Lever Bezel
Removal
1. Remove the transmission selector lever
knob.
For additional information, refer to
Transmission Selector Lever Knob
- in this
section.
2. Remove the selector lever bezel (selector
lever assembly shown removed for clarity).
Unclip the bezel.
Unclip the lamp.
Installation
1. Install the selector lever bezel (selector lever
assembly shown removed for clarity).
Clip the bezel.
Clip the lamp.
ELEOOl
2. Install the transmission selector lever knob.
For additional information, refer to
Transmission Selector Lever Knob
- in this
section.
2006.0 Fiesta 1212006 G294550en
procarmanuals.com

Automatic TransmissionlTransaxle External
Controls -Vehicles With: 4-Speed Automatic
307-05-1
3 Transmission (AW81-40) 307-05-1 3
REMOVAL AND INSTALLATION
Selector Lever Knob
, > .
Removal
1. Remove the floor console.
2. Disconnect the overdrive (OID) switch
electrical connector (selector lever assembly
shown removed for clarity).
3. Remove the selector lever knob.
Remove the bolt. i
Installation
1. Install the selector lever knob.
Position the knob.
lnstall the bolt.
2. Connect the OID switch electrical connector
(selector lever assembly shown removed for
clarity).
3. Install the floor console.
2006.0 Fiesta 1212006 G294551 en
procarmanuals.com

Automatic Transmission/Transaxle External
Controls -Vehicles With: 4-Speed Automatic
307-05-1 4 Transmission (AW81-40) 307-05-1 4
DISASSEMBLY AND ASSEMBLY
Selector Lever
Materials Unclip the lamp.
I I Name S~ecification
1 Grease I S-MlC1021-A I
Disassembly
N0TE:Use vice jaw protectors for all work to be
done in the vice.
1. Disconnect the overdrive (OID) switch
electrical connector.
Assembly
1. To assemble, reverse the disassembly
procedure.
Coat all sliding and turning parts with grease.
2. Remove the selector lever knob.
Remove the bolt.
3. Disassemble the selector lever.
Remove the brake shift interlock actuator.
Remove the selector lever bezel.
Unclip the bezel.
2006.0 Fiesta 1212006 G388014en
procarmanuals.com

Manual TransmissionlTransaxle and Clutch -
General lnformation
SECTION 308-00 Manual Transmission/Transaxle and
Clutch
- General lnformation
VEHICLE APPLICATION:2006.0 Fiesta
CONTENTS PAGE
SPECIFICATIONS
Specifications.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308-00-2
Clutch Dimensions
........................................................................\
.................................. 308-00-2
DIAGNOSIS AND TESTING
Manual Transaxle and Clutch ........................................................................\
..................... 308-00-3
Inspection and Verification
................................................................... ......................... 308-00-3
Gear shifting concerns
........................................................................\
........................... 308-00-3
Transaxle noise concerns
........................................................................\
........................... 308-00-3
Oil leakage concerns
........................................................................\
.................................. 308-00-3
GENERAL PROCEDURES
Gearshift Cable Adjustment.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (1 6 51 3 0) 308-00-1 1
( I Clutch System Bleeding ........................................................................\
......... (16 843 0) 308-00-12
procarmanuals.com

Manual Transmission/Transaxle and Clutch -
General Information
SPECIFICATIONS
Lubricants, Fluids, Sealers and Adhesives
Description Specificat
I ions I
Manual transmission fluid
I High melting point grease
Super DOT 4 brake fluid
Clutch Dimensions
I Description I Litres 1 '"<
fluid: 10 - 15
mm below the lower edge of the fluid
filler plug
--
2.3
Description
Pedal travel
Worn clutch disc discard thickness*
Clutch disc diameter:
1.25Ll1.4L Duratec-1 6V (Sigma)
Clutch disc diameter:
1.6L Duratec-I 6V (Sigma)
Clutch disc diameter:
2.OL Duratec-HE (M14)
Clutch disc diameter: 1.4U1.6L Duratorq-TDCi (DV) Diesel
Clutch disc diameter:
1.3L Duratec-8V (Rocam)
mm
135k5
7
190
210
220
210 190
* When the discard thickness has been reached, install a new clutch disc.
procarmanuals.com

Manual Transmission/Transaxle and Clutch -
308-00-3 General Information 308-00-3
DIAGNOSIS AND TESTING
Manual Transaxle and Clutch
lnspection and Verification
General Equipment selected with the engine running and the parking
brake applied, without any concerns, the clutch
2. If the gear@) cannot be selected, REFER to
Symptom Chart.
Ultraviolet
fluid leak detection equipment
1. Verify the customer concern.
Transaxle noise concerns
2. Visually inspect for obvious signs of mechanical is
OK.
damage. 1. Check the engine and transaxle support for
Oil leaks.
Visibly damaged or worn components.
Visual lnspection Chart insufficient gap between the transaxle and the
body.
REFER to:
RoadlRoller Testing (1 00-00 General
Information, Description and Operation).
Mechanical 2. Road test the vehicle.
4. If the cause is not evident, verify the symptom
and REFER to Symptom Chart.
Oil leakage concerns
Loose or missing nuts or bolts.
( I The following checks should be carried out before
repairing or installing a new transaxle. 1.
Check the transaxle fluid level. If necessary,
3. If a noise occurs in various gears at the same
- - drain off any excess fluid.
The inspection and verification of manual transaxle
concerns can be considered in three main areas. 2. Clean the transaxle and the adjacent areas
carefully and road test the vehicle.
engine speed,
check if the noise also occurs in
3. If an obvious cause for an observed or reported the neutral position.
If it does, the noise is not
concern is found, correct the cause (if possible) caused
by the transaxle.
before proceeding to the next step. 4.
REFER to Symptom Chart.
Gear shifting concerns REFER to: RoadlRoller Testing (1 00-00 General
Information, Description and Operation).
1, Check the operation of the clutch: Lay a block 3. U~ing suitable ultraviolet fluid leak detection
of wood approximately
25 mm thick under the equipment, locate
the leak and check whether
clutch pedal and depress the clutch pedal as the leaking fluid
is transaxle fluid, brake fluid
far as the stop. If first or second gear can be (from the hydraulically operated clutch)
or
engine oil.
4. REFER to Symptom Chart.
Symptom Chart
Symptom Possible Sources Action
I
Clutch slippage Clutch master
cylinder.
Clutch slave cylinder.
Clutch pressure plate.
Clutch disc.
Engine or transaxle housing oil
or fluid
leak@).
GO to Pinpoint Test A.
Clutch chatter or shudder Engine and transaxle
mounts. REFER to:
Noise, Vibration and
Harshness (NVH) (1 00-04,
Diagnosis and Testing).
Clutch pressure plate.
Clutch disc.
Flywheel.
--
GO to Pinpoint Test B.
- -
2006.0 Fiesta 1212006 G25629en
procarmanuals.com