2007 FORD FIESTA 204-02

204-02-3 Rear Suspension 204-0213
DESCRIPTION AND OPERATION
Rear Suspension
Overview
The rear suspension is a semi-independent In
addition, the diameter of the longitudinal
suspension. The track has been increased by 71 members
has been increased to increase stability
mm to 1444 mm. and to reduce unwanted movements
of the vehicle
around the longitudinal axis.
2006.0 Fiesta IZIZOO~ GI 67083en
procarmanuals.com

204-0214 Rear Suspension 204-02-4
DESCRIPTION AND OPERATION
suspension will not be correct. The installation .
orientation of the support bearing is indicated with
an arrow.
sensor pick-up ring
1 3 1 stub axle I
1 4 1 Brake back plate assembly with brake I
1 5 1 Bracket I
1 6 1 Spring I
1 7 1 Shock absorber I
A significant modification is the replacement of the
previous Mc-Pherson suspension struts with
separate spring and shock absorber elements. This
results in more space in the area of the suspension
strut turrets, thus increasing the volume of the
luggage compartment. In addition, the forces from
the spring and shock absorber elements are now
dissipated separately and have been individually
optimised.
The shock absorbers are single-tube gas shock
absorbers.
It is important that the correct installation orientation
is adhered to when assembling the support
bearings, as otherwise the geometry of the rear
- -
2006.0 Fiesta 1212006 GI 67083en
procarmanuals.com

204-02-5 Rear Suspension 204-02-5
DIAGNOSIS AND TESTING
Rear Suspension
I ' . REFER to Section 204-00 [Suspension System -
General Information].
2006.0 Fiesta 1212006 GI 7411 en
procarmanuals.com

204-02-6 Rear Suspension 204-02-6
REMOVAL AND INSTALLATION
Rear Shock Absorber(l5 791 0)
General Equipment 5. Remove the shock absorber.
I Transmission jack I
Removal
1. Remove the wheel and tire. For additional
information, refer to Section
204-04 [Wheels
and Tires].
2. Detach the fender splash shield from the
fender.
3. Using a suitable transmission jack, support
the beam axle.
4. Detach the shock absorber from the beam
axle.
Installation
I. Attach the shock absorber to the body.
2. N0TE:Do not fully tighten the shock
absorber lower mounting bolt at this stage.
Install the shock absorber.
2006.0 Fiesta lu2006 G89134en
procarmanuals.com

204-02-7 Rear Suspension 204-02-7
REMOVAL AND INSTALLATION
3. Attach the fender splash shield to the fender.
4. Install the wheel and tire. For additional
information, refer to Section
204-04 [Wheels
and Tires].
5. N0TE:The final tightening of the shock
absorber lower mounting bolt should be
carried out when the vehicle weight is on the
road wheels.
Tighten the shock absorber lower mounting
bolt.
2006.0 Fiesta 12/2006 G89134en
procarmanuals.com

204-0218 Rear Suspension 204-02-8
REMOVAL AND INSTALLATION
Special Tool(s) I I 3. Detach the shock absorber from the beam t,.
axle.
I I 1 4u AWARNING:A~ the spring is under extreme
tension care must
be taken at all times.
Removal Failure to follow this instruction may result
in personal injury.
1. Raise and support the vehicle. For additional
Remove the spring.
information, refer to Section
100-02 [Jacking
and Lifting].
Installation
2mA~~~~~~~:~~the~~ringis~nderextreme ~~~~~~:~~~~~~~~t~~t~~~~~tmo~~t~n~i~ (.
tension care must be taken at all times.
Failure to follow this instruction may result installed,
and the spring ends butt correctly
against the upper and lower spring seats.
in personal injury.
Using the special tools, compress the spring. Install
the spring.
2. N0TE:Do not fully tighten the shock
absorber lower mounting bolt at this stage.
Attach the shock absorber to the beam axle.
3. Lower the vehicle.
4. N0TE:The final tightening of the shock
absorber lower mounting bolt should be
carried out when the vehicle weight is on the
road wheels.
2006.0 Fiesta 1212006 G89135en
procarmanuals.com

204-02-9 Rear Suspension 204-02-9
REMOVAL AND INSTALLATION
Tighten the shock absorber lower mounting
bolt.
2006.0 Fiesta 1212006 G89135en
procarmanuals.com

204-02-1 0 Rear Suspension 204-02-1 0
REMOVAL AND INSTALLATION
Beam Axle(l5 231 0)
f
General Equipment 5. Detach the parking brake cable from the (.
beam axle bracket on both sides. I Transmission jack
I Securing strap I
I Electric hand drill I
I Blind rivet gun I
Removal
Vehicles with rear drum brakes
1. Release the parking brake.
2. Remove the rear wheels and tires.
For additional information, refer to: Wheel
and Tire (204.04 Wheels and Tires, Removal 6. Remove the brake dIIlm and wheel spindle
and Installation). assembly
on both sides.
3. Detach the rear wheel speed sensor and
brake hose retaining bracket from the beam
axle on both sides.
Remove the retaining bolt.
7m &AUTION:S~~~~~~ the brake backing
plate, wheel cylinder and brake shoes
assembly to prevent load being placed on
the brake hose.
4. Disconnect the parking brake cable on both
Detach the brake backing plate, wheel
sides. cylinder and brake shoes assembly from the
beam axle on both sides.
2006.0 Fiesta 1212006 G183767en
procarmanuals.com