2007 FIAT PANDA Electrical

ELECTRICAL ACCESSORIES
If, after buying the car, you decide to add electrical accessories (that will gradually drain the battery), visit a Fiat
Dealership. They can calculate the overall electrical requirement and check that the car’s electric system can sup-
port the required load.
CODE card
Keep the code card in a safe place, not in the car. You should always keep the electronic card code written on the
CODE card with you in case you need to carry out an emergency start-up procedure.
SCHEDULED SERVICING
Correct maintenance of the car is essential for ensuring it stays in tip-top condition and safeguards its safety fea-
tures, its environmental friendliness and low running costs for a long time to come.
THE OWNER HANDBOOK CONTAINS…
… information, tips and important warnings regarding the safe, correct driving of your car, and its maintenance. Pay
particular attention to the symbols
"(personal safety) #(environmental protection) !(the car’s wellbeing).

001-031 Panda New GB 21-06-2007 13:47 Pagina 3

IGNITION SWITCH fig. 9
The key can be turned to 3 different po-
sitions:
❒STOP: engine off, key can be removed,
steering column locked. Certain elec-
trical devices (e.g. sound system, cen-
tral door locking, etc.) can work
❒MAR: driving position. All electrical de-
vices are powered
❒AVV: engine starting.
The ignition switch is fitted with a safety
mechanism that, in the event the engine is
not started, turns back the ignition key to
STOPbefore repeating the starting oper-
ation. REQUEST FOR ADDITIONAL
REMOTE CONTROLS
The system can recognise up to 8 keys
with incorporated remote control. Should
a new key with remote control be nec-
essary, contact directly a Fiat Dealership,
taking with you the CODE card, a per-
sonal identity document and the car’s
ownership documents.
REPLACING THE BATTERY
OF THE KEY WITH REMOTE
CONTROL
Battery replacement:
❒open the snap-fitted lid A-fig. 7as
shown by the arrow
❒remove the exhaust battery and replace
it making sure that the bias is correct
(positive pole + up)
fig. 7F0G0683mfig. 8F0G0684mfig. 9F0G0026m
11
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
Used batteries are harmful to
the environment. They should
be disposed of as specified by
law in the special containers
provided, or take them to a Fiat Deal-
ership, which will deal with their dis-
posal.
❒new battery shall be fitted under catch
C-fig. 8; then refit the lid and press it
down until hearing the locking click.
001-031 Panda New GB 21-06-2007 13:47 Pagina 11

19
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
MULTIFUNCTION
DISPLAY
STANDARD SCREEN fig. 23
The standard screen shows the following
indications:
AHeadlight aiming position (only with
dipped beam headlights on).
BClock.
COdometer (covered km or miles). WARNING LIGHT TEST fig. 22
The following warning lights are tested:
❒handbrake on/low brake fluid level;
❒ABS and EBD systems (where provid-
ed);
❒ESP system (where provided);
❒“Dualdrive” electrical power steering
failure (where provided).
The test is automatically run when the ig-
nition key is turned to MARand during
normal operation when a fault is signalled.
At the end of the initial warning light test,
the message “LEd Error” will flash on the
display for 10 seconds if a faulty warning
light is found.
fig. 22F0G0185mfig. 23F0G0016m
NoteWith key removed (when opening
one of the front doors) the display will
turn on and show for a few seconds the
clock and the km or mi covered.
001-031 Panda New GB 21-06-2007 13:47 Pagina 19

20
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SETTING THE CLOCK fig. 25
To adjust the time, press button Ato in-
crease minutes, button Bto decrease min-
utes. Every press on the button increas-
es or decreases by one unit. Keeping the
corresponding button pressed obtains au-
tomatic fast increase or decrease. When
you are near the required value, release
the button and complete adjustment with
single presses.
fig. 25F0I0142m
WARNING LIGHT TEST fig. 26
The following warning lights are tested:
❒handbrake on/low brake fluid level;
❒ABS and EBD systems (where provid-
ed);
❒ESP system (where provided);
❒“Dualdrive” electrical power steering
failure.
fig. 26F0G0152m
The test is automatically run when the key
is turned to MARand during normal op-
eration when a fault is signalled. At the end
of the initial warning light test, the mes-
sage LEd Err will flash on the display for
10 seconds if a faulty warning light is found.
001-031 Panda New GB 21-06-2007 13:47 Pagina 20

36
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
Electrical adjustment fig. 43
Proceed as follows:
❒ use switch Bto select the mirror re-
quired;
❒ to adjust the mirror move the joystick
Ain the four directions.
fig. 43F0G0039m
As door mirrors are curved,
they may slightly alter the
perception of distance.
WARNING
On Actual versions, the door mirror shall
be adjusted from the outside; to adjust it
directly press slightly the four corners of
the mirror.
fig. 41F0G0197m
fig. 42F0G0040m
When driving the mirrors
shall always be in position 1.
WARNING
fig. 40F0G0036m
DOOR MIRRORS
Manual adjustment fig. 41-42
Use lever Ato adjust mirror Bfrom the
passenger compartment.
When required (for example when the
mirror causes difficulty in narrow spaces)
it is possible to fold the mirror moving it
from position 1(open) to position 2
(closed).
032-059 Panda New GB 21-06-2007 13:48 Pagina 36

57
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IIN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
DOORS
LOCKING/UNLOCKING FROM
THE OUTSIDE fig. 69
To unlock
Turn the key to 1and lift the handle.
With central door locking system (where
provided), when the key is turned all
doors are unlocked at the same time.
By remote control (where provided),
press button Ëto open the doors.To lock
Turn the key to 2with the door shut
properly.
With central door locking system (where
provided), all doors must be shut prop-
erly.
By remote control (where provided),
press button Á; to close the doors.
If one of the doors is not shut properly,
the central door locking system will fail.
IMPORTANT If one of the front doors is
open or the system is failing, central lock-
ing will not activate and after 6 attempts
in rapid sequence the device will be ex-
cluded for about 60 seconds. If there is a fault in the electrical
device fig. 67 and 68
Take the key Ein the tool box (in the
boot) and manually open/close the sun-
roof fitting the key into the motor seat.
To reach the seat, remove the pressure-
fit cover Flocated on the central roof
cross member (dividing the sunroof mo-
bile section from the fixed one).
fig. 67F0G0201m
fig. 68F0G0200m
fig. 69F0G0686m
Before opening a door,
make sure this can be done
in safety.
WARNING
Open the doors only when
the car is stationary.
WARNING
032-059 Panda New GB 21-06-2007 13:48 Pagina 57

58
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
CHILD LOCK fig. 71
To prevent opening the rear doors from
the inside.
This device can be engaged only with rear
doors open:
❒position 1- disengaged (door can
opened from the passenger’s compart-
ment);
❒position 2- engaged (door cannot
opened from the passenger’s compart-
ment).
The device will be engaged even if the
doors are unlocked electrically.
IMPORTANT Always use the device
when transporting children.
IMPORTANT After engaging the lock,
check by trying to open a rear door with
the internal handle. LOCKING/UNLOCKING FROM
THE PASSENGER’S
COMPARTMENT fig. 70
To unlock
Pull lever A.
With central door locking system, oper-
ating the driver’s door lever Awill unlock
all the doors. Lever Aof the other doors
will only open the corresponding door.
fig. 70F0G0062mfig. 71F0G0063m
To lock
Push lever Atowards the door. Operat-
ing the driver’s door lever Awill lock all
the doors. On the other doors the lever
will only lock the corresponding door.
With mechanical lock (i.e.: without cen-
tralised system), to lock a door you shall
operate the corresponding door lever; on-
ly for rear doors locking can be engaged
also with the door open.
032-059 Panda New GB 21-06-2007 13:48 Pagina 58

66
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SLANT COMPENSATION fig. 85
The car is fitted with an electrical device
for correcting the headlight slant. The de-
vice can be operated with the ignition key
at MARand the dipped beam headlights
are on.
When the car is loaded, it slopes back-
wards. This means the headlight beam ris-
es.
In this case, it is necessary to return it to
the correct position using buttons +and
–.
The display shows the positions during the
adjustment.ADJUSTING THE FRONT
FOGLIGHTS (where provided)
fig. 86
Have the headlight positioning checked at
a Fiat Dealership and adjusted if necessary.
fig. 85F0G0141mfig. 86F0G0076m
Correct positions according
to the load
Position 0- one or two passengers on
front seats.
Position 1- four passengers.
Position 2- four passengers + load in the
boot.
Position 3- driver + maximum admitted
load in the boot.
060-080 Panda New GB 21-06-2007 13:48 Pagina 66