2007 FIAT IDEA warning

297
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
INDEX
DASHBOARD
AND CONTROLS
TECHNICAL
SPECIFICATIONS
DIMENSIONS
Dimensions are expressed in mm and
refer to the vehicle fitted with standard
tyres.
The height refers to the vehicle unladen.
Boot volume
Unladen boot volume
(V.D.A. standards) ............ 315 dm
3
A B C D E F (*) G I
3930 794 2508 628 1660 (●) 1434 1698 1424
(*) Track measurements may vary according to rim size.
(●)1690 with longitudinal bars
F0H0301m

298
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
INDEX
DASHBOARD
AND CONTROLS
TECHNICAL
SPECIFICATIONS
PERFORMANCE
Top admitted speed after initial car use in km/h.
1.216V1.48V (◊)1.416V1.3 Multijet 70 HP 1.3 Multijet 90 HP 1.9 Multijet
163 163 175 159 173 179
(◊) Engine model provided for certain versions/markets only

299
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
INDEX
DASHBOARD
AND CONTROLS
TECHNICAL
SPECIFICATIONS
1.216V
1155
500
940
805
1655
1000
400
75
601.4
8V(◊) - 1.416V
1155
500
940
805
1655
1000
400
75
601.3 Multijet
1200
500
940
805
1700
1000
400
75
60
1.9 Multijet
1275
500
1000
805
1775
1100
500
75
60
WEIGHTS
Weights (kg)
Empty weight
(including all fluids, fuel tank at 90 %
and with no optional):
Payload (*)
including the driver:
Maximum admitted
loads (**)
– front axle:
– rear axle:
– total:
Towable loads:
– trailer with brakes:
– trailer without brakes:
Maximum load on roof:
Maximum load on tow hitch
(trailer with brakes):
(*) If special equipment is fitted (sunroof, tow hitch, etc.) the unladen car weight increases thus reducing the specified payload.
(**) Loads not to be exceeded. The driver is responsible for arranging the loads in the boot an/or on the roof so that they comply with
these limits.
(◊) Engine model provided for certain versions/markets only

300
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
INDEX
DASHBOARD
AND CONTROLS
TECHNICAL
SPECIFICATIONS
1.416V1.216V1.3 Multijet
kg
–
–
–
–
–
2.4
2.55
–
–
1.5
–
–kg
–
–
–
–
–
–
–
2.54
2.65
1.8
–
–litres
–
–
47
5 - 7
6.5
–
–
4.2
4.4
1.65
0.45
1.5kg
–
–
–
–
–
–
–
3.75
3.9
1.5
–
–litres
47
5 - 7
–
–
4.5
2.75
2.9
–
–
1.65
0.45
1.5 litres
47
5 - 7
–
–
4.5
2.5
2.7
–
–
1.65
0.45
1.5kg
–
–
–
–
–
2.2
2.35
–
–
1.5
–
–litres
–
–
47
5 - 7
6.0
–
–
2.85
3.0
1.98
0.45
1.51.9 Multijet1.48V (◊)
litres
47
5 - 7
–
–
4.5
2.4
2.6
–
–
1.65
0.45
1.5kg
–
–
–
–
–
2.1
2.25
–
–
1.5
–
–
CAPACITIES
Fuel tank:
including
a reserve of:
Fuel tank:
including
a reserve of:
Engine cooling
system:
Engine sump:
Engine sump
and filter:
Engine sump:
Engine sump
and filter:
Gearbox/
differential casing:
Hydraulic
brake circuit
Windscreen and
rear window washer
fluid reservoir
(❒) For use with very cold temperatures, we recommend using SELENIA PERFORMER MULTIPOWERSAE 5W-30.
(◊) Engine model provided for certain versions/markets onlySpecified fuels
Recommended products
Unleaded Premium petrol
with no less than 95 R.O.N
(EN228 Specifications)
Diesel fuel for motor
vehicles
(Specification EN590)
Mixture of distilled water
and PARAFLU UPat 50%
SELENIA 20K (❒)
SELENIA WR
TUTELA CAR
TECHNYX
TUTELA TOP 4
Mixture of water and
TUTELA
PROFESSIONAL SC 35

301
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
INDEX
DASHBOARD
AND CONTROLS
TECHNICAL
SPECIFICATIONS
Fluid and lubricant specifications
for correct car operation
Synthetic-based oils, grade SAE 10W-40, ACEA A3, API SL;
FIAT 9.55535-G2 qualification
Synthetic-based oils, grade SAE 5W-40,
FIAT 9.55535-M2 qualificationOriginal
fluids and lubricants
SELENIA 20K
SELENIA WRChange
According to Service
Schedule
According to Service
Schedule
FLUIDS AND LUBRICANTS
RECOMMENDED PRODUCTS AND THEIR SPECIFICATIONS
Use
Lubricants
for petrol
engines
Lubricants for
Multijet engines
If using non original SAE 5W-40 products, oils with minimum ACEA A3 specifications for petrol engines and ACEA B4 specifications for Diesel
engines are admitted; in this event top engine performance is not guaranteed.
Use of products with low-quality properties than ACEA A3 and ACEA B4 could cause damages to the engine that are not covered by the
warranty.
For use with very cold temperatures, ask Fiat Dealership for properSeleniagroup product.

302
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
INDEX
DASHBOARD
AND CONTROLS
TECHNICAL
SPECIFICATIONS
Use
Lubricants and greases for
transmission
Brake liquid
Protective agent
for radiator
Additive
for diesel fuel
Windscreen/
rear window
(●) IMPORTANT Do not add or mix with fluids with specifications other than the specified ones.Fluid and lubricant specifications
for correct car operation
Fully synthetic oil, grade SAE 75W-85 that passes API GL-4
PLUS, FIAT 9.55550 MIL-L- 2105 D LEV. Specifications
Specific transmission fluid with "ATF DEXTRON III"
type additives.
Lithium soap base grease. NLGI 0 consistency
Organic molibdenum disulphide, lithium soap based grease.
NLGI 2 consistency
Synthetic fluid FMVSS no. 116 DOT 4, ISO 4925,
SAE J1704, CUNA NC 956-01
Protective with antifreeze action (red colour) based on
inhibited monoethylen glycol, with O.A.T. formulation, that
passes CUNA NC 956-16, ASTM D 3306 specifications.
Additive for diesel fuels with protective action for
Multijet engines
Mixture of alcohol and surfactants CUNA NC 956-IIOriginal fluids
and lubrificants
TUTELA CAR
TECHNYX
TUTELA CAR
CS SPEED
TUTELA
MRM ZERO
TUTELA STAR 500
TUTELA TOP 4
PARAFLU UP (
●)
DIESEL MIX
TUTELA
PROFESSIONAL
SC 35Applications
Mechanical gearbox and
differential
Selespeed transmission
electrically-operated
electrohydraulic
actuator
CV joints on
differential side
CV joints on wheel side
Brake and clutch
hydraulic controls
Cooling circuits
Proportion: 50% down
to -35° C Not to be
mixed with products
having different formulas.
To be mixed with
the fuel oil
(25 cc per 10 litres)
To be used diluted or
undiluted

303
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
INDEX
DASHBOARD
AND CONTROLS
TECHNICAL
SPECIFICATIONS
FUEL CONSUMPTION
The fuel consumption figures given in the table below are determined on the basis of the homologation tests set
down by specific European Directives.
The procedures below are followed for measuring consumption:
❒urban cycle: cold starting followed by driving that simulates urban use of the car;
❒extra-urban cycle: frequent accelerating in all gears, simulating extraurban use of the car; the speed varies
between 0 and 120 km/h;
❒combined consumption: is calculated weighing about 37% of urban cycle consumption and about 63% of
extraurban consumption.
IMPORTANT The type of route, traffic situations, weather conditions, driving style, general conditions of the car,
trim level/equipment/accessories, load, climate control system, roof rack, other situations that affect air drag may
lead to different fuel consumption levels than those measured.
Fuel consumption according to Directive 1999/100/EC (litres x 100 km)Urban Extra-urban Combined
1.216V8.4 5.4 6.5
1.48V(◊) (5 gears) 7.9 5.2 6.2
1.416V (5 gears) 8.5 5.5 6.6
1.416V (6 gears) 8.7 5.4 6.6
1.3 Multijet 70HP 6.2 4.5 5.1
1.3 Multijet 90HP 6.0 4.0 4.7
1.9 Multijet 6,5 4.4 5.2
(◊) Engine model provided for certain versions/markets only

304
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
INDEX
DASHBOARD
AND CONTROLS
TECHNICAL
SPECIFICATIONS
CO2EMISSIONS
The CO2, emission levels at the exhaust given in the following table refer to combined consumption.
CO
2emissions according to 1999/100/EC Directive (g/km)
1.216V1.48V (◊)1.416V1.3 Multijet 70HP 1.3 Multijet 90HP 1.9 Multijet
5 gears 6 gears
154 146 157 157 135 124 137
(◊) Engine model provided for certain versions/markets only