47
Select YESor NOusing the “N” or “O”
keys and press SRC/OKor
ß/MAINto
confirm.
}Or with voice interaction:
Press
‘and say “Dictate desti-
nation”. Blue&Me™ Navwill tell
you the current setting using voice
synthesis and will ask you if you wish
to change it. Answer “Yes” to
change the option, “No” to main-
tain the current setting.
Note
It may be useful to disable the dictate des-
tination function if the map used contains
information in a language other than that
set for voice recognition in the
Blue&Me™ Navsystem.
For further information, consult the
“PROBLEM SOLVING – NAVIGATION
SYSTEM”
❒Restore settings
Use this setting to restore the initial nav-
igation system settings.
?
With manual interaction, proceed as
follows:
Select the RESTORE SETTINGS
option by pressing SRC/OKor
ß/MAIN.
Select YESor NOusing the “
N”
or “O” keys and press SRC/OKor
ß/MAINto confirm.
}Or with voice interaction:
Press
‘and say “Restore set-
tings”. Blue&Me™ Navwill ask
you whether you wish to restore
the initial factory settings by means
of voice synthesis. Answer “Yes” to
proceed, “No” to keep the current
settings.
Vehicle position
This function allows you to find out the
car’s exact position expressed as a latitude
(North/South) and longitude (East/West),
shown on the reconfigurable multifunction
display. This function also provides infor-
mation on the number of GPS satellites re-
ceived by the Blue&Me™ Nav.
?
To find out the vehicle’s GPS posi-
tion with manual interaction:
Activate the main Menu, select the
NAVIGATIONoption and then
press SRC/OKor
ß/MAIN.
Select the VEHICLE POSITION
option and press SRC/OKor
ß/MAINto display the required
data.
}Or with voice interaction:
Press
‘and say “Navigation”.
Once you have heard the system
message, say “VEHICLE POSI-
TION”. Blue&Me™ Navwill dis-
play the required information.
Route simulation
Blue&Me™ Navuses this function to
display a simulation of the calculated route.
Note
To carry out a simulation, navigation to-
wards a destination must be in progress.
A destination must therefore have been
set and the route must have been suc-
cessfully calculated.
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 47
4848
SETTINGS FUNCTIONS
The SETTINGSmenu enables you to
perform the following functions:
❒Pairing a mobile phone
❒Managing user data
❒Managing Blue&Me™ Navupdate
❒Media player settings
❒Advanced Options.
To perform functions and adjustments in
the SETTINGSmenu, you may use but-
tons on the steering wheel or voice com-
mands at car standstill. When the car is
moving, you can use voice commands on-
ly. Instructions are provided for both
methods.
If you encounter difficulties with any of
the Blue&Me™ Navsettings, consult
section TROUBLESHOOTING.PAIRING A MOBILE PHONE
Before you can use your mobile phone
with the hands-free phone function on
your car, you must create a pairing rela-
tionship between the mobile phone and
the hands-free phone system.
During the pairing procedure, the hands-
free phone system attempts to detect a
phone equipped with Bluetooth
®wire-
less technology within range, and then es-
tablishes the connection using a Personal
Identification Number (PIN). After a pair-
ing relationship is established, you can use
the hands-free phone system to make and
receive phone calls, and do other opera-
tions via your wirelessly-connected mo-
bile phone.
IMPORTANT The mobile phone pairing
PIN number is a special PIN generated
randomly at each new pairing and used
just for this operation. It is not your SIM
PIN and therefore it is not required to
store or to keep it in mind; loosing it will
not impair the hands-free phone system
operation.
The pairing procedure will only need to
be performed once for your mobile
phone. After this procedure Blue&Me™
Navwill automatically connect to your
phone each time you get into the car and
turn the ignition key to MAR. For road safety reasons, it is only possi-
ble to alter the navigation settings with the
car at a standstill.
?
To simulate the active route, by
means ofmanual interaction:
Activate the main Menu, select the
NAVIGATIONoption and then press
SRC/OKor
ß/MAIN.
Select the ROUTE SIMULATION
option and press SRC/OKor
ß/MAIN
to start the simulation.
To stop the simulation, simply press
the NAVkey on the keypad near the
courtesy light.
}Or with voice interaction:
Press
‘and say “Navigation”.
Once you have heard the system
message, say “route simulation”.
Blue&Me™ Navwill start the sim-
ulation.
To stop the simulation, press
‘and say “Navigation”
For road safety reasons, it is
only possible to enter a new
destination with the car at a stand-
still.
WARNING
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 48
73
NAVIGATION SYSTEM VOICE COMMANDS
• Navigation
• Navigator
Activate the NAVIGATIONmenu
• Next maneuver
• Maneuver
• Next
• Next maneuver
Repeat the last voice message
during navigation
• Resume navigation
• Resume
• Activate
• Navigate
Resume previously interrupted
navigation
Provides an estimated time
of arrival and estimated distance
from destination
• Arrival information
• Information
• Arrival
Interrupt a navigation session
• Interrupt navigation
• Interrupt navigation
• Suspend
• Interrupt
Call up the menu to enter
a destination
• New destination
• New
• New
• Destination
• New route
• Address
Used to enter a destination
address
• Points of interest
• POI
• Select POI
• Select points of interest
• Select
Used to enter a Points of interest
for a destinationProvides a voice
list of available
categories of
points of interest
• List
• List
• List POI
• List POIs
• List points of interest
• List points of interest
• List
Select the Airport
category• Airport
• Airports
Select the Bus
Station category
• Bus station
• Bus
• Coach
• Bus station
• Bus stations
Select the Ferry
Terminal category
• Ferry terminal
• Ferries
• Boats
• Ferry terminal
Select the
Hospital category• Hospital
• Hospitals
Select the
Park&Ride
category• Park and ride
Select the Car
Park category• Car park
• Car parks
Select the Police
Station category• Police station
• Police station
Select the Car
Rental Agencies
category• Car Rental Agencies
• Car rental
• Enter number
• Enter house
number
• Civic number
• Number
• Start
• Start
• Start navigation
• Local
• Locally
• Nearby
• Elsewhere
• Other place
• Other town/city
Used to enter destination
address house number
Start navigating towards the
displayed destinationUsed to select a point
of interest near the car
Used to select a point of interest
near a selected address
• Enter road
• Enter street
• Road
• Street
• City centre
• Centre
Start navigating to the
town/city centre Used to enter name of
destination road/street
continued➯
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 73
74
Call up one a recent
destination set
Set the type of route
• Recent destinations
➯continues
• Navigation
• Navigator
Activate the NAVIGATIONmenu
• Next maneuver
• Maneuver
• Next
• Next maneuver
Repeat the last voice message
during navigation
Use to set preferences for
the type of route
• Navigation settings
Provides an indication of
latitude, longitude and number
of GPS satellites visible
• Vehicle position
• Route simulation
• Simulation
Simulates the set route
• Type of route
• Type of route
• Set type of route
• Route
Include or exclude motorways
from the route calculation
• Set motorways
• Motorways
Include or exclude ferries
from the route calculation
• Set ferries
• Ferries
• Boats
Include or exclude toll roads from
the route calculation
• Set tolls
• Tolls
• Set toll
• Toll
Enable or disable completion
of the destination by voice.
• Dictate destination
• Dictate
• Dictate destination
Start navigating towards the
displayed destination
• Start
• Navigate
Display the next destination
in the list
• Forward
• Next
Display the previous desti-
nation in the list
• Back
• Previous
Delete the displayed
destination
• Delete
Delete all the destinations
in the list
• Delete all
Select the Picnic
Area category• Picnic area
Select the Train
Station category• Train Station
• Train station
• Trains
Select the Vehicle
Service category• Vehicle service
• Vehicle service
Select the Service
Station category
• Petrol station
• Service stations
• Petrol station
• Petrol stations
Select the
Chemist category• Chemist
• Chemists
Select the
Restaurant
category• Restaurant
• Restaurants
Select the Hotel
category• Hotel
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 74
97
❒No USB device is connected
❒The USB device connected does not
contain map data
❒The USB device is faulty or connected
incorrectly
❒GPS signal reception could be hin-
dered if the car is located beneath
trees, among tall buildings, in covered
car parks or in tunnels.
❒The battery has been disconnected
(e.g. during servicing).
❒A system fault may have occurred or
the GPS aerial may have been discon-
nected.
❒Insert the USB connecting the
Blue&Me™ Navmaps in the USB
port.
❒Check that the USB device in use the
same one received in the
Blue&Me™ Navnavigation set or
check that the maps for
Blue&Me™ Navare loaded on the
USB device.
❒Check the USB device is properly
connected.
❒Check that the USB device used is
the same one included in the
Blue&Me™ Navnavigation set.
❒Try to load the map data onto a new
USB device using the Blue&Me™
Nav Map Assistantsoftware on
the map CD-ROM (see the
Blue&Me™ NavMap Assistant
quick guide in the Blue&Me™ Nav
navigation set).
❒Move the car to an open area where
the GPS signal reception is good, or
wait until the obstacle has passed if
the vehicle is moving.
❒Wait at least 15 minutes to allow the
system to calculate the correct GPS
position again.
❒Consult a Fiat dealer. NAVIGATION SYSTEM
Problem Probable Cause Possible Solution
The display indicates:
INSERT USB MEMORY
WITH MAPS
The display indicates:
WAIT… NO GPS SIGNAL
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 97
98
The car is located in a country or region
whose maps are not present on the USB
device and the destination entered is not
therefore available.
❒The mobile phone registered is off.
❒Your Bluetooth®mobile phone is not
registered
❒The registered mobile phone is not
within the system’s radius of action (it
must be located within 10 metres of
the system).
❒The Bluetooth®connection between
the system and mobile phone has been
disabled on your mobile phone
(“Blue&Me” identifier).
❒The telephone number of the selected
point of interest is not available on the
map.
Incorrect selection of the deletion
functionEnsure that the preloaded map software
contains all the countries or regions required
to define the required route (from the car’s
current position to the destination).
❒Turn on the mobile phone.
❒Register the mobile phone.
SETTING FUNCTIONS – REGISTER
MOBILE PHONE.
❒Ensure the mobile phone you have
registered on the car’s handsfree
system is within the system’s radius of
action.
❒Ensure that the Bluetooth®connec-
tion to the car’s handsfree system
(“Blue&Me” identifier) is activated on
your mobile phone.
❒–
You can delete the entire list of recent des-
tinations by selecting the DELETE ALL
option or by speaking the command
“delete all” with voice interaction.
NAVIGATION FUNCTIONS –
RECENT DESTINATIONS
Problem Probable Cause Possible Solution
The display indicates:
ROUTE CALCULATION
NOT POSSIBLE
It is not possible to call the telephone
number for a point of interest
(e.g. Restaurant)
It is not possible to delete the list
of RECENT DESTINATIONS
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 98
9999
PERSONAL DATA PROTECTION
The functions offered by the Blue&Me™ Navdevice involve the processing of personal data. To protect unauthorised access to
this information, the device has been constructed to ensure that:
❒Personal data linked to the handsfree functions (phonebook, recent calls and text message inbox) are accessible only following
automatic recognition of the user’s mobile phone by means of Bluetooth®technology;
❒Personal data on the device (phonebook, recent calls, text message inbox and recent destinations) may be deleted using specific
Blue&Me™ Navfunctions.
For further information on the deletion of personal data (phonebook, recent calls and text message inbox), refer to the section
SETTING FUNCTIONS – USER DATA.
For further information on deleting recent destinations, refer to the section NAVIGATION FUNCTIONS – RECENT DESTI-
NATIONS.
IMPORTANT When leaving your car in a service centre, remember that the personal data stored on the Blue&Me™ Nav
(phonebook and recent cars, text message inbox and recent destinations), may be recorded or subject to improper use. Before
leaving your car in a service centre, you will be able to delete registered user data and phonebook data stored in the Blue&Me™
Nav.
For further information on the deletion of user data, phonebook, and text message inbox, refer to the section SETTING FUNC-
TIONS – USER DATA.
For further information on deleting recent destinations, refer to the section NAVIGATION FUNCTIONS – RECENT DESTI-
NATIONS.
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 99