2007 FIAT DOBLO Owners Manual

200TECHNICAL SPECIFICATIONS
CAPACITIES
1.4
litres kg
60 –
5 - 7 –
7–
2.4 2.1
2.6 2.25
1.98 1.8
1.3 1.2
0.5 –
0.55 –
7–
Fuel tank:including a reserve of:
Engine cooling
system:
Engine sump:
Engine sump and filter:
Manual gearbox:
Power steering
Front and rear brakes
hydraulic circuit:
Hydraulic brake circuit
with ABS:
Windscreen and rear window
washer fluid reservoir:
(▲) For particularly hard climate conditions, we recommend use of a 60% PARAFLU UP and 40% demineralized water mixture.
(❒) For particularly cold temperatures use SELENIA MULTIPOWER.
Prescribed fuel
Recommended products
Unleaded petrol not lower than
95 R.O.N
50 - 50 mixture of distilled water
and PARAFLU UP
(▲)
SELENIA 20K(❒)
TUTELA CAR ZC 75 SYNTH
TUTELA GI/E
TUTELA TOP 4
TUTELA TOP 4
Mixture of water and TUTELA
PROFESSIONAL SC 35

201TECHNICAL SPECIFICATIONS201
1.9 Multijet
litres kg
60 –
5 - 7 –
6.5 –
4.0 (❍) 3.5 (❍)
4.3 (❍) 3.7 (❍)
1.98 1.8
1.3 1.2
0.5 –
0.55 –
7– 1.3 Multijet
litres kg
60 –
5 - 7 –
6.5 –
3.0 (■) 2.6 (■)
3.2 (■) 2.8 (■)
1.98 1.8
1.3 1.2
0.5 –
0.55 –
7–
(▲) For particularly hard climate conditions, we recommend use of a 60% PARAFLU UP and 40% demineralized water mixture.
(❍) For particularly cold temperatures use SELENIA WR.
Fuel tank:including a reserve of:
Engine cooling
system:
Engine sump:
Engine sump and filter:
Manual gearbox:
Power steering
Front and rear brakes
hydraulic circuit:
Hydraulic brake circuit
with ABS:
Windscreen and rear window
washer fluid reservoir: Prescribed fuel
Recommended products
Diesel fuel for motor vehicles
(EN590 Specification)
50 - 50 mixture of distilled water
and PARAFLU UP
(▲)
SELENIA TURBO DIESEL(❍)
SELENIA WR(■)
TUTELA CAR ZC 75 SYNTH
TUTELA GI/E
TUTELA TOP 4
TUTELA TOP 4
Mixture of water and TUTELA
PROFESSIONAL SC 35

202TECHNICAL SPECIFICATIONS
FLUIDS AND LUBRICANTS
PRODUCTS WHICH MAY BE USED AND THEIR CHARACTERISTICS
Specifications of the lubricants and fluids to use
for best operation
Synthetic-based engine oils grade SAE 10W-40
that pass ACEA A3 and API SL specifications.
Synthetic-based engine oils grade SAE 5W-30
that pass ACEA A1-A5 - API SL and
FIAT 9.55535-M1specifications.
Synthetic-based engine oils grade SAE 10W-40
that pass ACEA B3 and API CD specifications.
Synthetic-based engine oils grade SAE 5W-40
that pass ACEA B4, API CF and
FIAT 9.55535-M2specifications.
Synthetic-based engine oils grade SAE 5W-40 that pass
ACEA B4, API CF and FIAT 9.55535-M2specifications
F0A0175b
(*) For very low temperatures, we recommend SELENIA MULTIPOWER.
(**) For very low temperatures, we recommend SELENIA WR.
Applications Use
Lubricants for
petrol engines (*)
Lubricants for
diesel engines (**)
Lubricants for
diesel engines
(1.3 Multijet versions)
Fluids and lubricants
recommended
SELENIA 20K
SELENIA
MULTIPOWER
SELENIA
TURBO DIESEL
SELENIA
WR

203TECHNICAL SPECIFICATIONS203
Use
Lubricants and greases
for transmission
Brake fluids
Radiator
antifreeze
Diesel fuel additive
Windscreen/
rear window
washer fluid
(*) IMPORTANT Do not top up or mix with fluids having characteristics different from those specified.
(❑) For particularly hard climate conditions, we recommend use of a 60% PARAFLU UP and 40% demineralized water mixture.
Specifications of the lubricants and fluids to
use for best vehicle operation
Oil SAE 75W-80 EP that passes API GL-5 and MIL-L-
2105D LEV specifications
Oil type ATF DEXRON II D LEV, SAE 10 W
Synthetic fluid, FMVSS n° 116 DOT 4, ISO 4925,
SAE J-1703, CUNA NC 956-01
Red protective with antifreeze action, based on
inhibited monoethylen glycol with organic formula based
on O.A.T,
That passes CUNA NC 956-16, ASTM D 3306
specifications
Diesel fuel additive
Mixture of alcohol and surfactants CUNA NC 956-II
Fluids and lubricants
recommended
TUTELA CAR
ZC 75 Synth
TUTELA GI/E
TUTELA TOP 4
PARAFLU UP
TUTELA DIESEL ART
TUTELA
PROFESSIONAL SC
35
Applications
Mechanical gearbox
and differentials
Hydraulic power
steering
Hydraulic brakes and
clutch controls
Radiator antifreeze
proportion:
50% distilled water and
50% PARAFLU UP (❑)
To be mixed with
diesel fuel
(25 cm
3for 10 litres)
To be used diluted or
undiluted

204TECHNICAL SPECIFICATIONS
FUEL
CONSUMPTIONIMPORTANT Road and traffic
conditions, weather, driving style,
fittings and accessories, load, roof
racks, special devices and over-
all vehicle conditions can penalise
aerodynamic penetration and in-
Fuel consumption according to European Directive 2004/3/EC
litres x 100 km)
fluence fuel consumption rates
which can be different from the
values shown in the table (see
“Cheap running that respects the
environment”). The fuel consumption figures given in
the table below are determined on the
basis of the homologation tests set
down by specific European Directives.
Consumption values are defined by
means of the following procedures:
– urban cycle:consisting of a cold
start and a simulated drive in city
streets;
– extra-urban cycle:consisting in
frequent accelerations, in all gears,
simulating normal conditions of use.
Speed ranges from 0 to 120 km/h;
– average combined cycle:con-
sisting of 37% urban cycle and 63% ex-
tra-urban cycle.
Urban Extra-urban Combined
1.49.2 6.3 7.4
1.4 high roof9.4 6.5 7.6
1.4 7 seater9.2 6.3 7.4
1.3 Multijet 75 HP6.5 4.7 5.4
1.3 Multijet 85 HP6.3 4.5 5.2
1.3 Multijet 85 HP high roof6.8 4.9 5.6
1.3 Multijet 85 HP 7 seater6.3 4.5 5.2
1.9 Multijet 100/105 HP7.5 4.8 5.8
1.9 Multijet 120 HP7.5 5.2 6.1
1.9 Multijet 120 HP high roof7.7 5.3 6.2
1.9 Multijet 120 HP 7 seater7.5 5.2 6.1

205TECHNICAL SPECIFICATIONS205
CO2EMISSION AT EXHAUST
The CO2emission levels at the ex-
haust given in the following table refer
to combined consumption.CO2emissions according to Directive 1999/100/EC (g/km)
1.4174
1.4 high roof178
1.4 7 seater174
1.3 Multijet 75 HP142
1.3 Multijet 85 HP137
1.3 Multijet 85 HP high roof148
1.3 Multijet 85 HP 7 seater137
1.9 Multijet 100/105 HP153
1.9 Multijet 120 HP160
1.9 Multijet 120 HP high roof163
1.9 Multijet 120 HP 7 seater160

206TECHNICAL SPECIFICATIONS
RADIO-FREQUENCY REMOTE CONTROL: MINISTERIAL
HOMOLOGATION
The homologation number is printed directly on the key grip for the markets where this is required.
International motoring
code Country Homologation number
B Belgium RTT/D/X1924
CH Switzerland BAKOM 99.0415 KP
D Germany TPS A100282L CEPT LPD - D
DK Denmark CEPT SRD feDK
E Spain 01 00 0100
F France 99 0346 PPL 0
GB Great Britain BPS037
GR Greece TA 232
I Italy –
IRL Ireland TRA 24/5/ 107/11
L Luxembourg 9942599-01 L2432/10562-01J
N Norway NO99000251
P Portugal ICP-053TC-99
S Sweden Ue990108
SF Finland FI99080046

207TECHNICAL SPECIFICATIONS
PROVISIONS FOR THE PROCESSING OF A VEHICLE
AT THE END OF ITS LIFE-CYCLE
For years now Fiat has been developing its global commitment towards the safeguarding and protection of the
Environment through the continuous improvement of its production processes and the making of increasingly more “eco
friendly” products. With a view to guaranteeing the best possible service to clients in full observance of environmental
standards and in response to the obligations imposed by European Directive 2000/53/EC on end-of-life vehicles, Fiat offers
its clients the possibility to hand in their vehicle* at the end of its life span without additional costs.
The European Directive, in fact, provides for the take-back of the vehicle without the last holder or owner of the same
incurring expenses due to the fact that the market value of the vehicle is zero or negative. In particular, in almost all of
the countries of the European Union, up until 1st January 2007, take-back of the vehicle free of charge only applies to vehi-
cles registered from 1 July 2002 on, while, from 2007 on, take-back will be carried out free of charge, independently of
the year of registration, provided that the vehicle still contains all its essential component parts (especially engine and
body) and is free from additional waste materials.
Our contracted network of authorised treatment facilities has been carefully selected in order to provide a quality ser-
vice to our customers by de-polluting and recycling “End of Life Vehicles” to approved environmental standards. To find
out the location of your nearest authorised treatment facility, offering free of charge take-back, simply contact one of our
dealers or refer to the Fiat web site or call the toll free number 00800 3428 0000.
*Passenger transportation vehicles to seat a max. of nine persons, having a total admissible weight of 3.5 t