2007 Citroen C6 DAG lock
[x] Cancel search: lockPage 38 of 216
41
II
R E M O T E C O N T R O L
FOLDING AND EJECTING THE KEY
Button D is for folding and ejecting the key from its housing in the remote control.
If you do not press on button D, you could damage the key mechanism.
Changing the remote control battery
Unclip the cover to gain access to the battery.
Battery: CR 0523 of 3 V.
After a change of battery, it may be necessary to re-initialise t he remote control. To do that, switch on the ignition and immediately action button Bon your remote control to trigger the action desired. This may ta ke some ten seconds.Note: Make a careful note of the numbers for the keys and for the remot e c o n t r o l o n t h e A S S I S T A N C E c a r d . K e e p t h i s i n a s a f e p l a c e .
Do not throw away the old batteries. They should be returned to a C I T R O Ë Ndealer or deposited at a recognised collection point (a camera shop, for e x a m p l e ) .
Except when reinitialising, the remote control cannot function while the key is in the ignition, even when switched off.
Warning: by inadvertently actioning the remote control, when for example it is in your pocket, you can unlock the vehicle without your realising it.
However, if none of the doors is opened within thirty seconds following an unlocking, the doors will automatically relock.
Warning: there is a risk of damage if the replacement batte ry is not the correct one.
O n l y u s e b a t t e r i e s t h a t a r e i d e n t i c a l o r e q u i v a l e n t t o t h o s e a p p r o v e d b y C I T R O Ë N .
GUIDE-ME-HOME LIGHTING
A press on button C operates the guide-me-home lighting (illumina-tion of the sidelamps and dipped b e a m s f o r a p p r o x . o n e m i n u t e ) .
A second press prior to the end of this timing cancels the guide-me-home lighting.
LOCATING OF THE VEHICLE
To locate the vehicle on a carpark, press button B, the interior lamps come on and the direction indica- t o r s fl a s h f o r a f e w s e c o n d s . T h e vehicle remains locked.
Page 39 of 216
42
II
K E Y S
It is dangerous to operate the deadlocking when a person is in the vehicle as unlocking is impossible from the inside (without the remote control).
The key number is on the label attached to the key.
S h o u l d y o u l o s e y o u r k e y o r r e m o t e c o n t r o l , a C I T R O Ë N d e a l e r c a n s u p p l y r e p l a c e m e n t s .
If you unlock your vehicle using the key because of a problem with the battery, be aware that opening/closing a door with the window closed can ser iously damage the glass, even to the point of breaking it. See “Access”.
ELECTRONIC IMMOBILISER KEY
The key operates all the vehicle’s locks as well as the ignition.Note: For safety reasons, a buzzer will sound if you have switched off the ignition and opened the driv-er’s door without having removed the ignition key.
The key can be used to deactivate the front passenger’s airbag. See “Airbags”.
CENTRAL LOCKING USING THE KEY
A brief action with the key locks the vehicle.
Deadlocking: Central locking using the key
A second action straightaway with the key deadlocks the vehicle. It is then impossible to open the doors from either inside or outside the vehicle.Note:With the vehicle stationary and the engine switched off, locking is sig- n a l l e d b y t h e fl a s h i n g o f t h e i n t e r i o r l o c k i n g c o n t r o l w a r n i n g l a m p .If any of the doors, or the boot, is open or not properly closed , the central Iflocking does not operate.
ELECTRONIC IMMOBILISER
The ELECTRONIC IMMOBILISER device locks the engine supply system.
The system activates automatically as the key is removed from the igni tion.
All the vehicle’s keys contain an electronic immobiliser device.
After you switch on the ignition, a dialogue starts between the key and the electronic immobiliser device.
If the key is not recognised, you cannot start the vehicle .
If this occurs, leave your vehicle immobilised and contact a CITRO ËN dealer.
Page 42 of 216
45
II
AB
A N T I - I N T R U S I O N A L A R M
OPERATING THE ALARM
First make sure all the doors are closed.
The alarm is armed by pressing button B on the remote control.
With the alarm armed, the protections are active after 5 s e c o n d s ( p e r i m e t e r ) a n d 4 5 s e c o n d s ( v o l u m e t r i c ) .
W h e n t h e a l a r m i s a r m e d ( o n s t a n d b y ) , a n y i n t r u s i o n will trigger the siren for 30 seconds, accompanied by the direction indicators lighting up.
The alarm then goes back on standby, but the trigger-ing remains memorised and is signalled by the rapid fl a s h i n g o f t h e w a r n i n g l a m p o n c o n t r o l 1 after you have deactivated the alarm with a press on the unlocking button A . T h e fl a s h i n g s t o p s w h e n y o u s w i t c h o n t h e ignition.
The siren is also triggered if there is a cutting of the electrical supply. To stop it, restore the electrical supply then press on the unlocking button A.Note:If you want to lock your vehicle without arming the Ifalarm, just lock with the key only.
If you lock your vehicle and a door, or the boot, is still Ifopen, the central locking does not operate but the alarm will arm itself after approx. 45 seconds.Note: The siren is automatically deactivated (for exam-ple for disconnecting the battery) as soon as the vehicle is unlocked using the remote control.
Page 43 of 216
46
II
S T E E R I N G L O C K – I G N I T I O N – S T A R T E R
NEVER REMOVE THE IGNITION KEY BEFORE THE ENGINE HAS COME TO A COMPLETE STOP.
IT IS ESSENTIAL ALWAYS TO DRIVE WITH THE ENGINE RUNNING, SO AS TO RETAIN STEERING AND BRAKING ASSISTANCE (risk of the steering lock engaging and loss of safety features).
When stationary, having removed the key, carefully turn the steering wheel if you wish to lock the steering.
S: STEERING LOCK
To unlock the steering, gently move the steering wheel while turning the key, without exerting undue force.
When you remove the key, turn your steering wheel to lock the steering. The key can only be removed when in position S.
M: DRIVE POSITION
The steering is unlocked (by turn-ing the key in position M, if neces- s a r y m o v e t h e s t e e r i n g w h e e l ) .
STARTING AND STOPPING THE ENGINE
See “Driving”.
ECONOMY MODE
In order not to discharge the bat-tery while the engine is stopped, your vehicle goes automatically into economy mode after a max-imum of 30 minutes. Economy mode is indicated by a message on the screen.
The electrical components relating to comfort and also the headlamps (not sidelamps or hazard warning l a m p s ) c u t o u t a u t o m a t i c a l l y . T o reactivate them, it is necessary to start the engine.
Depending on your vehicle ver-sion, the following warning lamps are tested:
If one of these warning lamps does not light up, this indicates a mal-function.
D: STARTING
Release the key as soon as the engine starts. Never turn it while the engine is running.
Page 46 of 216
53
II
00
00A
A
I N S T R U M E N T P A N E L
Maintenance intervals
If you use your vehicle in par- t i c u l a r l y d i f fi c u l t c o n d i t i o n s , it is essential to have recourse to the service schedule for “special con-ditions” comprising shorter inter-vals between services. See “Main-tenance Guide”.
Reset to zero
Your CITROËN technician resets the indicator to zero after each service. However, if you do your own servicing, the procedure for resetting to zero is as follows:1. Switch off the ignition.2. Press on button A and keep it pressed.3. Switch on the ignition.4. Keep button A pressed down until the screen indicates “=0” and the maintenance symbol disappears.
Note: If the maximum time between two oil changes is reached before the mileage has been covered, the mainte-nance spanner lights up and the instrument panel indicates “0instrument panel indicates “instrument panel indicates “”.
MILEAGE RECORDER
Display
When the driver's door is opened or the vehicle is unlocked with the remote control, for around 30 sec-onds there is display of the mile-age recorders and sometimes the maintenance spanner.
Trip mileage recorder reset
This can operate when the ignition is switched on.
With a long press on the zero reset button A, the trip mileage dis-played resets to zero.
FUEL GAUGE
If the fuel low warning lamp comes on permanently on horizontal ground, accompanied by a sound signal, there remain around 9 l of f u e l ( p e t r o l v e r s i o n ) o r 8 l of fuel ( D i e s e l v e r s i o n ) .
When the second-to-last bar dis-appears, you still have approx. 5 lof fuel.
REV COUNTER
When you approach maximum engine speed, crossing into the red zone indicates the need to engage a higher gear.
Page 71 of 216
73
II
B
D
E
C
A
UNLOCKING IN EMER-GENCY
In the event of a malfunctioning of the electric parking brake or a bat-tery failure, provided your gearbox i s n o t o n P a r k p o s i t i o n ( P ) w i t h a n automatic gearbox, or a gear is engaged with a manual gearbox:1. Open the lower compart-ment in the central armrest by actioning the control B.
E L E C T R I C P A R K I N G B R A K E
5. Make sure that you position the strap back in its location D. Otherwise, applyng the brake w i l l n o t b e p o s s i b l e a f t e r fi v e attempts.Contact a CITROËN dealer.
This strap cannot apply the parking brake. To re-apply the electric parking b r a k e ( a f t e r fi r s t r e s o l v i n g t h e m a l f u n c t i o n o r t h e b a t t e r y f a i l u r e ) , p u l l t h e n release the control A. The time for applying the brake subsequent to the emergency unlocking will be longer.
Note: During the emer-gency unlocking, the warn-ing lamp for the electric parking brake will light up in the instrument panel.
2. Detach the CD storage section by pulling on the tabs C.3. Disengage the strap from its location D.4. Pull the strap to unlock the b r a k e . A l o u d c l i c k c o n fi r m s that the brake is unlocked.
Note: It is essential to make sure that the parking brake warning lamp does indeed light up in the instrument panel.
Remark: Presence of the diagnostic socket
Take care not to place dusty or damp items close to the socket E, which is vital to the maintenance operations on your vehicle.
Page 72 of 216
74
II
B R A K E S
ABS system
The ABS system enhances your safety by preventing the wheels from locking in the event of sudden braking or in conditions of poor road adherence. It enables you to retain control of the steering.
The functioning capability of all the electrical components essential to the ABS is monitored electronically before and during your journey. The ABS warning lamp lights up when you switch on the ignition: it should go out after a few seconds.
If the monitoring warning lamp does not go out, that means that the ABS has disconnected because there is a fault. Also, the fact that the monitoring warning lamp comes on durin g the journey shows that the ABS system is inactive. I n b o t h c a s e s , t h e n o r m a l b r a k i n g s y s t e m r e m a i n s e f fi c i e n t , e x a c t l y a s o n a v e h i c l e w i t h o u t A B S . H o w e v e r , i n o r d e r for the security associated with the correct functioning of the ABS to be restored, the vehicle should be examined as soon as possible by a CITROËN dealer.for the security associated with the correct associated with the
O n r o a d s w i t h p o o r a d h e r e n c e ( c h i p p i n g s , s n o w , i c e e t c . ) , i t i s a l w a y s i m p e r a t i v e t o d r i v e w i t h p r u d e n c e .
SYSTEM OF EMERGENCY BRAKING ASSISTANCE
The emergency braking assistance system helps you to attain the requ ired braking pressure more rapidly, thus to reduce the stopping distance. It operates as a function of the speed of action on the brake pedal, decreasing the resistance to this action. To prolong this action of the emerg ency braking assistance system, simply keep your foot on the brake pedal.
If the Electronic Parking Brake is off, the lighting of this wa rning lamp in conjunction with the STOP w a r n i n g l a m p i n d i c a t e s t h a t t h e b r a k e fl u i d l e v e l i s l o w o r t h a t t h e b r a k i n g d i s t r i b u t o r i s m a l -functioning. It is essential to stop the vehicle. Contact a CITROËN dealer as soon as possible. w a r n i n g l a m p i n d i c a t e s t h a t t h e b r a k e fl u i d l e v e l i s l o w o r t h a t t h e b r a k i n g d i s t r i b u t o r i s m a l - w a r n i n g l a m p i n d i c a t e s t h a t t h e b r a k e fl u i d l e v e l i s l o w o r t h a t t h e b r a k i n g d i s t r i b u t o r i s m a l -
Page 80 of 216
82
III
A
LOCKING/UNLOCKING FROM THE INSIDE
A press on the control A operates the electric central locking and unlocking, provided all the doors are closed.
It is still possible to open the doors from the inside.
Remark: Control A is inactive if the vehicle has been locked using the remote control or the key.
The three statuses for locking/unlocking the vehicle are signalled by the warning lamp on the con-trol A:It fl a s h e s w h e n t h e v e h i c l e i s locked, engine stopped.
It lights up when the ignition is switched on, vehicle locked.It goes out when the vehicle is unlocked.