2007 CITROEN C4 wheel
[x] Cancel search: wheelPage 138 of 279
133
XI
P R A C T I C A L I N F O R M A T I O N
CHANGING A WHEEL
Access to the tools
The tools are located in the spare
w h e e l , u n d e r t h e b o o t fl o o r .
To gain access to them:
open the boot,
l i f t t h e fl o o r ,
unclip and remove the box con-
t a i n i n g t h e t o o l s . List of tools
A l l o f t h e s e t o o l s a r e s p e c i fi c t o y o u r
v e h i c l e . D o n o t u s e t h e m f o r o t h e r
p u r p o s e s .
1. Wheelbrace
2. Centring guide
3. Tool for bolt protectors on
aluminium wheels
4. Jack with handle
5. Aluminium wheel central
embellisher removal tool
6. Socket for anti-theft bolts
(located in the glove box)
A d j u s t s t o t h e w h e e l b r a c e .
7. R e m o v a b l e t o w i n g e y e Access to the spare wheel
The spare wheel is installed in the
b o o t , u n d e r t h e fl o o r .
Removing the wheel
U n d o t h e y e l l o w c e n t r a l s c r e w b y
a q u a r t e r t u r n .
Raise the spare wheel towards
y o u r e a r w a r d s .
Remove the wheel from the boot
s p a c e .
Page 139 of 279
134
XI
P R A C T I C A L I N F O R M A T I O N
R e fi t t i n g t h e w h e e l Dimension of the spare wheel
I f y o u r s p a r e w h e e l i s o f d i f f e r e n t
dimensions to those on the vehicle
( i d e n t i fi e d b y a l a b e l ) , i t i s e s s e n t i a l
t o u s e i t o n l y o n a t e m p o r a r y b a s i s ,
to drive not above 50 mph (80 km/h)
a n d t o h a v e t h e o r i g i n a l w h e e l r e fi t -
t e d a s s o o n a s p o s s i b l e .
Switch on your hazard
warning lamps.
It is imperative to ensure
that the occupants get out of the
vehicle and wait in a safe location.
Never get underneath the vehi-
cle if it is supported only by the
jack; use an axle stand.
T h e j a c k i s d e s i g n e d s p e c i fi c a l l y
for your vehicle, do not use it for
other applications.
R e fi t t h e r e p a i r e d o r i g i n a l w h e e l
as soon as possible.
W i t h a s p a r e w h e e l fi t t e d , d r i v e
with caution.
The wheel should be correctly
p o s i t i o n e d fl a t i n t h e c e n t r e o f
its well. Light alloy wheels
I f y o u r v e h i c l e i s e q u i p p e d w i t h
l i g h t a l l o y w h e e l s a n d a s t e e l s p a r e
w h e e l , t h e n i f fi t t i n g t h e l a t t e r i t i s
normal to note that the heads of the
wheel bolts do not come to bear on
t h e w h e e l r i m .
The steel spare wheel is secured
b y t h e c o n i c a l t a p e r i n g o f t h e w h e e l
b o l t s ’ s h a f t s , s e e d i a g r a m .
W h e n r e fi t t i n g t h e l i g h t a l l o y w h e e l ,
ensure that the wheel bolt heads are
i n u n d a m a g e d c o n d i t i o n .
R e fi t t h e w h e e l i n p l a c e .
U n d o t h e y e l l o w c e n t r a l s c r e w b y
a few turns, then position it at the
c e n t r e o f t h e w h e e l .
D o u p t h e c e n t r a l s c r e w u n t i l t i g h t
s o t h a t t h e w h e e l i s s e c u r e l y r e -
t a i n e d i n p l a c e .
Page 140 of 279
135
XI
P R A C T I C A L I N F O R M A T I O N
Removing a wheel
List of operations
P a r k t h e v e h i c l e o n s t a b l e , fi r m
g r o u n d . A p p l y t h e p a r k i n g b r a k e .
Switch off the ignition and en- g a g e fi r s t g e a r o r r e v e r s e g e a r ,
depending on the slope (for ve-
hicles with automatic gearbox,
s e l e c t p o s i t i o n P ) .
D e t a c h t h e e m b e l l i s h e r u s i n g t h e
wheelbrace 1 b y p u l l i n g c l o s e t o
t h e v a l v e .
For vehicles with aluminium wheel rims, slide the embellisher
removal tool 5 into the slot in the
c e n t r a l e m b e l l i s h e r a n d a p p l y
fi r m l e v e r a g e t o d e t a c h .
Slacken the wheel bolts using
the wheelbrace 1 .
For vehicles with aluminium wheel rims, slacken the anti-theft
bolt using the socket 6 fi t t e d o n
the wheelbrace 1 .
Position the jack under the
b o d y s h e l l , e x a c t l y a s i n t h e i l l u s -
tration at the mark A , closest to
t h e w h e e l t h a t i s t o b e r e p l a c e d .
Operate the jack 4 until its base
i s i n c o n t a c t w i t h t h e g r o u n d .
Make sure that the base of the
j a c k i s v e r t i c a l l y b e l o w t h e j a c k -
i n g p o i n t u s e d .
R a i s e t h e v e h i c l e .
Remove the bolts and disengage
t h e w h e e l . List of operations
Position the wheel using the cen-
tring guide 2 .
D o u p t h e 3 b o l t s b y h a n d a n d
r e m o v e t h e c e n t r i n g g u i d e .
P o s i t i o n t h e 4 t h b o l t .
Pretighten the bolts using the
wheelbrace 1 . F o r v e h i c l e s w i t h a l -
uminium wheel rims, pretighten the
anti-theft bolt using the socket 6
fi t t e d o n t h e w h e e l b r a c e 1 .
Retract the jack 4 a n d d i s e n g a g e i t .
Tighten the wheel bolts using the
wheelbrace 1 and the anti-theft
bolt using the socket 6 .
Reposition the embellisher, com-
m e n c i n g b y p l a c i n g t h e s l o t a t
the valve, pressing it home with
t h e p a l m o f y o u r h a n d .
For vehicles with aluminium wheel rims, reclip the central
e m b e l l i s h e r i n p l a c e .
Stow the tools and the wheel in
t h e b o o t .
C h e c k t h e t y r e p r e s s u r e a n d a l s o
h a v e i t s b a l a n c i n g c h e c k e d .
Fitting a wheel
Page 141 of 279
136
XI
P R A C T I C A L I N F O R M A T I O N
TEMPORARY TYRE REPAIR KIT Using the kit
The kit is located in the boot under
t h e fl o o r . I t i s i n s t a l l e d i n t h e t o o l b o x ,
l o c a t e d u n d e r t h e s t o r a g e b o x .
S w i t c h o f f t h e i g n i t i o n .
Tick the wheel to be repaired
on the speed limitation sticker
e n c l o s e d t h e n a f fi x t h e s t i c k e r
to the vehicle's steering wheel
t o r e m i n d y o u t h a t a w h e e l i s i n
t e m p o r a r y u s e .
Clip the bottle 1 on the compres-
sor 2 .
Check that the switch A is tilted
to position "0" .
Connect the pipe of the bottle 1
t o t h e v a l v e o f t h e t y r e t o b e r e -
p a i r e d .
Unwind the pipe of the compres-
sor 2 f u l l y , t h e n c o n n e c t i t t o t h e
b o t t l e .
Connect the compressor's elec-
tric plug to the vehicle's 12 V
s o c k e t .
Start the vehicle and leave the
e n g i n e r u n n i n g .
C o m p l e t e s y s t e m c o n s i s t i n g o f a
compressor and a bottle of sealant
which permits
temporary repair of
t h e t y r e s o t h a t y o u c a n d r i v e t o t h e
n e a r e s t g a r a g e .
This repair kit is available from
C I T R O Ë N d e a l e r s .
It is designed to repair holes of
a maximum diameter of 6 mm,
l o c a t e d e x c l u s i v e l y o n t h e t y r e
t r e a d o r s h o u l d e r . A v o i d r e m o v i n g
a n y f o r e i g n b o d i e s w h i c h h a v e
p e n e t r a t e d t h e t y r e .
Page 143 of 279
138
XI
P R A C T I C A L I N F O R M A T I O N T a k e c a r e , t h e b o t t l e o f fl u i d
c o n t a i n s e t h y l e n e - g l y c o l .
This product is harmful if
swallowed and causes irritation to
t h e e y e s . K e e p i t o u t o f r e a c h o f
c h i l d r e n .
T h e e x p i r y d a t e o f t h e fl u i d i s i n d i -
c a t e d o n t h e b a s e o f t h e b o t t l e .
The bottle is designed for a sin-
g l e u s e ; e v e n i f o n l y p a r t l y u s e d , i t
m u s t b e r e p l a c e d .
After use, do not discard the bot-
tle into the environment, take it to a
CITROËN dealer or to an organisa-
t i o n r e s p o n s i b l e f o r i t s c o l l e c t i o n .
D o n o t f o r g e t t o o b t a i n a n e w b o t -
t l e o f fi l l i n g p r o d u c t , a v a i l a b l e f r o m
C I T R O Ë N d e a l e r s .
Adjust the pressure using the
c o m p r e s s o r ( t o i n fl a t e : s w i t c h A in
position "1" ; t o d e fl a t e : s w i t c h A in
position "0" and press button B ),
in accordance with the vehicle's
t y r e p r e s s u r e l a b e l ( l o c a t e d o n t h e
door aperture on the driver's side),
then remember to check that the
l e a k i s fi l l e d c o r r e c t l y ( n o f u r t h e r
loss of pressure after several
m i l e s [ k i l o m e t r e s ] ) .
Remove the compressor, then
s t o r e t h e w h o l e k i t .
D r i v e a t r e d u c e d s p e e d ( 5 0 m p h
[80 km/h] max) for no more than
a p p r o x i m a t e l y 1 2 5 m i l e s ( 2 0 0 k m ) .
Visit a CITROËN dealer as soon as
p o s s i b l e t o h a v e t h e t y r e r e p a i r e d
o r r e p l a c e d b y a t e c h n i c i a n . I f t h e v e h i c l e i s fi t t e d w i t h t y r e u n d e r -
i n fl a t i o n d e t e c t i o n , t h e t y r e u n d e r -
i n fl a t i o n w a r n i n g l i g h t w i l l r e m a i n o n
after the wheel has been repaired
u n t i l t h e s y s t e m i s r e i n i t i a l i s e d b y a
C I T R O Ë N d e a l e r .
Connect the compressor's elec-
tric plug to the vehicle's 12 V
s o c k e t a g a i n .
Start the vehicle again and leave
t h e e n g i n e r u n n i n g .
Page 162 of 279
155
XI
P R A C T I C A L I N F O R M A T I O N
TOWING THE VEHICLE
P r o c e d u r e f o r h a v i n g y o u r v e h i c l e
towed or for towing another vehicle
u s i n g a r e m o v a b l e t o w i n g e y e .
Access to the tools
The tools are located under the boot
fl o o r .
To gain access to them:
open the boot,
l i f t u p t h e fl o o r ,
detach and remove the holder
c o n t a i n i n g t h e t o o l s . Towing your vehicle
On the front bumper, unclip the
c o v e r b y p r e s s i n g a t t h e t o p l e f t
a n d p u l l i n g a t t h e r i g h t .
S c r e w t h e t o w i n g e y e i n f u l l y .
A t t a c h t h e t o w i n g b a r .
S w i t c h o n t h e h a z a r d w a r n i n g
l a m p s o n t h e t o w e d v e h i c l e .
Place the gear lever in neutral
(position N on the electronic
g e a r b o x o r a u t o m a t i c g e a r b o x ) . Towing another vehicle
On the rear bumper, unclip the
c o v e r b y p r e s s i n g a t t h e b o t t o m
a t p u l l i n g a t t h e t o p .
S c r e w t h e t o w i n g e y e i n f u l l y .
A t t a c h t h e t o w i n g b a r .
S w i t c h o n t h e h a z a r d w a r n i n g
l a m p s o n t h e t o w e d v e h i c l e .
Failure to observe this special con-
dition could result in damage to
certain braking components and
the absence of braking assistance
t h e n e x t t i m e t h e e n g i n e i s s t a r t e d . When towing with all four wheels on
t h e g r o u n d , a l w a y s u s e a t o w i n g b a r .
W h e n t o w i n g w i t h o n l y t w o w h e e l s
o n t h e g r o u n d , a l w a y s u s e p r o f e s -
s i o n a l l i f t i n g e q u i p m e n t .
When towing with the engine off,
t h e r e i s n o l o n g e r a n y b r a k i n g o r
s t e e r i n g a s s i s t a n c e .
Page 191 of 279
184
06
4
1
23
51
23
4
5
2
1
STEERING WHEEL CONTROLS
1. Volume increase.
2. Volume decrease.
3. Mute.
4. RADIO: selection of the previous or next stored station. C D / M P 3 / U S B : selection of the previous or next directory. CD CHANGER: selection of the previous or next CD.
5. R A D I O : a u t o m a t i c s e a r c h f o r a h i g h e r f r e q u e n c y . C D / M P 3 / C D C H A N G E R / U S B : selection of the next track. CD/MP3/CD CHANGER: continuous press: fast forwards play.
1. Displays the main screen.
2. S e l e c t i o n o f t h e t y p e o f i n f o r m a t i o n d i s p l a y e d o n t h e r i g h t -hand side of the screen for the monochrome screen A .
3. A b a n d o n t h e o p e r a t i o n i n p r o g r e s s and return to the previous display.
4. N a v i g a t i o n t h r o u g h t h e m e n u s .
5. C o n fi r m a t i o n o f t h e f u n c t i o n s e l e c t e d . I f y o u r v e h i c l e i s fi t t e d w i t h t h e B l u e t o o t h s y s t e m : p i c k u p a n i n c o m i n g c a l l o r h a n g u p a c a l l w h i c h i s i n p r o g r e s s .
I f y o u r v e h i c l e i s fi t t e d w i t h t h e B l u e t o o t h s y s t e m :
1. P r e s s : a c t i v a t i o n o f t e l e p h o n e v o i c e r e c o g n i t i o n (if the telephone offers this function).
2. Press: displays the phone book, of the call list.
Page 228 of 279
32
4
1
2 3
51
2 3
4
51
2
3
4
STEERING WHEEL CONTROLS
STEERING WHEEL CONTROLS
1. Volume increase.
2. Volume decrease.
3 . Mute.
4 . RADIO: selection of the previous or next stored station. MP3/JUKEBOX: selection of the previous or next directory. CD CHANGER: selection of the previous or next CD.
5 . R A D I O : a u t o m a t i c s e a r c h f o r a h i g h e r f r e q u e n c y . CD/MP3/JUKEBOX/CD CHANGER: selection of the next track. CD/MP3/CD CHANGER: continuous press: fast forwards play.
1. Displays the main screen.
2. Selection of the mode displayed ( T R I P , T E L , N A V o r A U D I O ) .
3 . A b a n d o n t h e o p e r a t i o n i n p r o g r e s s and return to the previous display.
4 . N a v i g a t i o n t h r o u g h t h e m e n u s .
5 . C o n fi r m a t i o n o f t h e f u n c t i o n s e l e c t e d .
1. Short press: A c t i v a t i o n o f t h e v o i c e r e c o g n i t i o n .
2. WHEN THE TELEPHONE IS NOT IN USE: L o n g p r e s s : a c c e s s t o t h e t e l e p h o n e m e n u ( p h o n e b o o k , c a l l l i s t , . . . ) . INCOMING CALL: Short press to accept. L o n g p r e s s t o r e j e c t t h e c a l l . CALL IN PROGRESS: S h o r t p r e s s t o h a n g u p . L o n g p r e s s t o a c c e s s t h e t e l e p h o n e m e n u .
3 . Personalisation: S h o r t p r e s s : c o n fi r m a t i o n o f t h e s e l e c t i o n m a d e u s i n g t h e d i a l .
4 . Rotation: Move around the phone book, the call list. Selection of personalisation.