For engine oil crankcase capacity, seeCapacities
and Speci cations on page 513.
Notice:Do not add too much oil. If the engine
has so much oil that the oil level gets above the
cross-hatched area (F) that shows the proper
operating range for the L6 engine or above
the cross-hatched area for the V8 engine,
the engine could be damaged.
SeeEngine Compartment Overview on page 396
for the location of the engine oil ll cap.Be sure to add enough oil to put the level
somewhere in the proper operating range.
Push the dipstick all the way back in when you
are through.
SS Model Only
Remove the engine cover for access to the
engine oil ll cap as follows:
1. Undo the screw in the middle of the cover.
2. Pop the cover off of the stud on the
driver side.
3. Angle the cover up and pull it off of the
bracket.
4. Reverse above steps to reinstall the cover.
Except 6.0L V8
(VIN Code H) Engine6.0L V8 (VIN Code H)
Engine
403
Capacities and Speci cations
The following approximate capacities are given in English and metric conversions. SeeRecommended
Fluids and Lubricants on page 529for more information.
ApplicationCapacities
English Metric
Air Conditioning Refrigerant R134aFor the air conditioning system refrigerant charge
amount, see the refrigerant caution label located
under the hood. See your dealer for more
information.
Cooling System
4.2L L6 9.7 qt 9.2 L
5.3L V8 11.2 qt 10.6 L
6.0L V8 11.2 qt 10.6 L
Engine Oil with Filter
4.2L L6 7.0 qt 6.6 L
5.3L V8 6.0 qt 5.7 L
6.0L V8 6.0 qt 5.7 L
Fuel Tank 22.0 gal 83.3 L
513
