5. After entering all of the switch positions, again,
rmly press and release all three buttons at the
same time. The indicator lights will turn on.
6. Press and hold the button you would like to use
to control the garage door until the garage door
moves. The indicator light above the selected
button should slowly blink. You may need to
hold the button from ve to 55 seconds.
7. Immediately release the button when the
garage door moves. The indicator light will
blink rapidly until programming is complete.
8. Press and release the same button again. The
garage door should move, con rming that
programming is successful and complete.
To program another Fixed Code device such as an
additional garage door opener, a security device, or
home automation device, repeat Steps 1-8,
choosing a different button in Step 6 than what you
used for the garage door opener.
Using Universal Home Remote
Press and hold the appropriate button for at least
half of a second. The indicator light will come
on while the signal is being transmitted.
Reprogramming Universal Home
Remote Buttons
You can reprogram any of the three buttons by
repeating the instructions.
Erasing Universal Home Remote
Buttons
You should erase the programmed buttons when
you sell or terminate your lease.
To erase either Rolling Code or Fixed Code on
the Universal Home Remote device, do the
following:
1. Press and hold the two outside buttons at the
same time for approximately 20 seconds, until
the indicator lights, located directly above
the buttons, begin to blink rapidly.
2. Once the indicator lights begin to blink,
release both buttons. The codes from all
buttons will be erased.
For help or information on the Universal Home
Remote System, call the customer assistance
phone number underCustomer Assistance Offices
on page 652.
197
Gage (cont.)
Tachometer.............................................. 250
Voltmeter Gage........................................ 257
Garage Door Opener................................... 187
Gasoline
Octane..................................................... 491
Speci cations........................................... 491
Glove Box................................................... 198
GM Mobility Reimbursement Program.......... 653
H
Hazard Warning Flashers............................ 213
Head Restraints............................................ 18
Headlamps.................................................. 546
Bulb Replacement.................................... 545
Daytime Running Lamps.......................... 224
Flash-to-Pass........................................... 216
Halogen Bulbs......................................... 545
High/Low Beam Changer......................... 216
On Reminder........................................... 224
Pickup Box Identi cation and Fender
Marker Lamps...................................... 548
Heated Seats................................................ 12
Heater................................................236, 239
Heater......................................................... 240Highbeam On Light..................................... 267
Highway Hypnosis....................................... 417
Hill and Mountain Roads............................. 418
Hood
Checking Things Under............................ 498
Release................................................... 498
Horn............................................................ 213
How to Use This Manual................................ 4
How to Wear Safety Belts Properly............... 27
I
Ignition Positions......................................... 135
Infants and Young Children, Restraints.......... 49
In ation - Tire Pressure............................... 561
Instrument Panel
Overview.........................................208, 211
Storage Area............................................ 199
Instrument Panel (I/P)
Brightness................................................ 227
Cluster..................................................... 249
J
Jump Starting.............................................. 534
675
