Page 177 of 580
3. Push both left latches away from you to lock
the latches. Remember that there are four
latches total for panel 1. You should hear a
click when each latch locks correctly. Lock the
remaining two right latches on panel 1.
The left latch on the cargo covers must be
locked in place before you can lock the right
latch. If you do not follow this exactly, the
cargo cover panels may not lock in place
correctly.4. Install cargo cover 2 next. Place the latches in
the unlocked position. Place the cargo cover
panel on the cargo area rails while holding
the back of the cargo panel up.
Push the panel forward until it is snug against
the other panel and then let the back of the
panel down being sure that the pegs align with
the receivers.
Left Side Shown, Right Side Similar
177
Page 178 of 580
5. Push the latches away from you, starting with
the left latch, to lock the panel in place. You
should hear a click when each latch locks
correctly.
6. Install cargo cover 3 next. Place the latches in
the unlocked position. Place the cargo cover
panel on the cargo area rails while holding
the back of the cargo panel up.Push the panel forward until it is snug against
the other panel and then let the back of the
panel down being sure that the pegs align with
the receivers.
Left Side Shown, Right Side Similar
178
Page 179 of 580
7. Push the latches away from you, starting with
the left latch, to lock the panel in place. You
should hear a click when each latch locks
correctly.
Folding and Storage of Straps
To store the folding straps inside the top box
storage compartment, do the following:
1. Extend the six strap ends on a at surface.
179
Page 180 of 580
2. Fold the four primary strap ends towards the
center as shown.
3. Take the short strap and surround the folded
webbing, forming a package.4. Take the secondary strap and wrap it around
the package. Finally, attach the hooks to the
webbing and place inside the top box
storage compartment.
180
Page 181 of 580