2007 CADILLAC DTS AUX

The window will rise for as long as the switch is
held. Once the switch is released, the express
mode is re-activated.
In this mode, the window can still close on an
object in its path. Use care when using the
override mode.
Window Lockout
o
(Window Lockout):The rear window lockout
button is located on the driver’s door armrest
near the window switches.
Press the right side of the button to disable the
rear window controls. The light on the button
will illuminate, indicating the feature is in use. The
rear windows still can be raised or lowered
using the driver’s window switches when the
lockout feature is active.
To restore power to the rear windows, press the
button again. The light on the button will go out.
Sun Visors
Swing down the primary visor to block out glare. It
can also be detached from the center mount
and moved to the side while the auxiliary sunshade
remains to block the glare from the front. The
visors also have side-to-side slide capability.
Lighted Visor Vanity Mirror
Pull the visor down and lift the cover to view the
mirror. The light will come on when the cover
is opened. It will go out when you close the cover.
If your vehicle has the adjustable lighting feature,
slide the switch up or down to brighten or dim
the light.
111

AUX:If your vehicle has a rear climate control
system, press this button to turn the rear climate
control fan on for automatic operation. After
the AUX button is pressed, the indicator light
will come on. Press the button again to turn the
auxiliary fan off. SeeRear Climate Control System
on page 218.
#(Air Conditioning):Press the center of the
left control to override the automatic system
and turn the air conditioning system on or off.
When in AUTO, the air conditioning compressor
will come on automatically, as necessary.
The air conditioning system removes moisture from
the air, so you may notice a small amount of water
dripping underneath your vehicle while idling or
after turning off the engine. This is normal.
Sensors
The solar sensor, located in the defrost grille,
middle of the instrument panel, monitors the solar
radiation. Do not cover the solar sensor or the
system will not work properly.
214

Defogging and Defrosting
Fog on the inside of windows is a result of high
humidity (moisture) condensing on the cool window
glass. This can be minimized if the climate control
system is used properly. There are two modes to
clear fog from your windshield. Use the oor/defog
mode to clear the windows of fog or moisture and
warm the passengers. Use the defrost mode to
remove fog or frost from the windshield more
quickly.
W(Floor/Defog):Turn the control to this mode
to direct approximately half of the air to the
oor outlets and the remaining air is directed to
the side window outlets and to the windshield.
When you select this mode, the system turns
off recirculation and runs the air conditioning
compressor unless the outside temperature is
at or below freezing. The recirculation mode
cannot be selected while in the oor/defog mode.
0(Defrost):Turn the control to this mode to
direct most of the air to the windshield and the
side window outlets. In this mode, the system will
automatically turn off recirculation and run the
air conditioning compressor, unless the outside
temperature is at or below freezing. Recirculation
cannot be selected while in the defrost mode.
Do not drive the vehicle until all the windows
are clear.
For professional vehicles, air will be allowed to
ow through the rear outlets. For quicker defrost,
press the AUX button on the front climate
control system so that the light is not lit.
216

Rear Climate Control System
If your vehicle has a rear climate-control system,
the rear-seat passengers can use it to adjust
the direction of the airow, the fan speed and
the temperature for the rear-seating area.
This system also works with the main
climate-control system in your vehicle.
The control panel for this system is located on the
back of the center console.If the AUX button located on the front climate
control panel is pressed, the rear climate control
system will be turned on. The rear system will
operate in automatic mode and the temperature
settings selected for the front climate control panel
will also be selected for the rear passengers.
If the rear passenger would like to adjust the
rear climate control system, they can select
a different temperature and a different mode
or fan speed.
Whenever the rear passengers have adjusted
settings on the rear climate control system,
the AUX light is lit on the front climate control
system. The driver can turn off the auxiliary fan
by pressing the AUX button.
When the front climate control system is turned
off or in defrost mode, the rear climate control
system is turned off. The rear system will turn
back on once another front mode is selected.
For more information on how to use the climate
control system, seeDual Climate Control System
on page 210. For more information on the air
outlets, seeOutlet Adjustment on page 217.
218

Automatic Operation
«A ª(Fan):Press this button until AUTO
appears on the display to place the system in
automatic mode. When automatic operation is
active, the system will automatically control the fan
speed. If in auto fan mode, pressing the up arrow
button will cancel automatic operation and places
the system in manual mode. If in auto mode,
pressing the down arrow will turn the rear climate
control system off.
«Nª(Mode):Press the this button until
AUTO appears on the display to place the system
in automatic mode. When automatic operation
is active, the system will automatically control
the air delivery mode.
Manual Operation
«A ª(Fan):Press these up or down arrow
buttons to increase or decrease the fan speed.
«bª(Temperature):Press these up or
down arrow buttons to increase or decrease the
temperature for the rear seat passengers. Once the
rear setting temperature is altered from followingthe front setting temperature, it will no longer follow
changes to the front setting temperature until the
front climate control AUX button resets it.
«Nª(Mode):Press these buttons to change
the air delivery mode. If in AUTO air delivery
mode, pressing the up arrow button will cancel
automatic operation and place the system in
manual mode.
Y(Vent):This mode directs air to the upper
outlets.
%(Bi-Level):This mode directs half the air
to the upper outlets, and the other half to the oor
outlets.
[(Floor):This mode directs the air to the oor
outlets.
For more information on how to use the front
climate control system, seeDual Climate Control
System on page 210.
For more information on the air outlets, seeOutlet
Adjustment on page 217. Be sure to keep the
area under the front seats clear of any objects
so that the air inside of your vehicle can circulate
effectively.
219

Surround (Centerpoint®): Select this screen
button to enable Bose Centerpoint®signal
processing circuitry. Centerpoint®produces a
full vehicle surround sound listening experience
from a CD, MP3/WMA, or XM stereo digital
audio source and delivers ve independent
audio channels from conventional two channel
stereo recordings. (Not available for AM, FM,
or auxiliary sources.)
Digital Signal Processing (DSP) is only available
on vehicles that have the Bose
®Premium
audio system.
Finding a Category (CAT) Station
CAT (Category):The CAT button is used to nd
XM™ (if equipped) stations while the radio is in the
XM™ mode. To nd XM™ (if equipped) channels
within a desired category, perform the following:
1. Press the BAND button until the XM™
(if equipped) frequency displays. Press
the CAT button to display the category labels.Continue pressing the CAT button until the
desired category name displays. Another
way to select a category is to press
the
sREV or\FWD button until
the desired category is selected.
2. Press either of the two pushbuttons below the
desired category label to immediately tune to
the rst XM™ (if equipped) station associated
with that category.
3. Turn the
aknob, press the pushbuttons
below the displayed right or left arrows,
or press either SEEK arrow to go to the
previous or the next XM™ (if equipped)
station within the selected category.
4. To exit the category search mode, press the
FAV button or BAND button to display your
favorites again.
279

sREV (Reverse):Press and hold this button
to reverse playback quickly within a track. You will
hear sound at a reduced volume. Release this
button to resume playing the track. The elapsed
time of the track displays.
\FWD (Fast Forward):Press and hold this
button to advance playback quickly within a track.
You will hear sound at a reduced volume.
Release this button to resume playing the track.
The elapsed time of the track displays.
RDM (Random):With the random setting, CD
tracks can be played in random, rather than
sequential order. This feature is not available in
playlist mode. To use random, do the following:
1. To play tracks in random order from the
CD that is currently playing, press the
pushbutton positioned under the RDM label.
The random icon displays.
2. Press the same pushbutton again to turn off
random play. The random icon is no longer
highlighted.
4(Information):Press this button to switch the
display between the track number, elapsed time of
the track, and the time. When the ignition is off,
press this button to display the time (if the clock
display is enabled). See “Enabling/Disabling the
Digital Radio Clock” under,Setting the Time on
page 269for more information.
BAND:Press this button to listen to the radio
when a CD is playing. The CD remains inside the
radio for future listening.
CD/AUX (CD/Auxiliary):Press this button to
play a CD when listening to the radio. The CD icon
and track number displays when a CD is in the
player. Press this button again and the system
automatically searches for an auxiliary input
device, such as a portable audio player.
If a portable audio player is not connected,
“No Aux Input Device Found” displays.
282

RDM (Random):With the random setting,
CD tracks can be played in random, rather than
sequential order, on one CD or all CDs in a
six-disc CD player. To use random, do one of
the following:
To play the tracks in random order from the CD
that is currently playing, press the pushbutton
positioned under the RDM label until
Randomize Current Disc displays. Press the
pushbutton again to turn off random play.
To play tracks from all CDs loaded in a
six-disc CD player in random order, press the
pushbutton positioned under the RDM label
until Randomize All Discs displays. Press the
same pushbutton again to turn off random play.
BAND:Press this button to listen to the radio
when a CD is playing. The CD remains inside the
radio for future listening.CD/AUX (CD/Auxiliary):Press this button to play
a CD when listening to the radio. The CD icon
and a message showing disc and/or track number
displays when a CD is in the player. Press this
button again and the system automatically
searches for an auxiliary input device, such as a
portable audio player. If a portable audio player
is not connected, “No Aux Input Device Found”
displays.
Playing an MP3/WMA CD-R or
CD-RW Disc
Your vehicle’s radio system may have the MP3
feature. If it has this feature, it is capable of playing
an MP3/WMA CD-R or CD-RW disc. For more
information on how to play an MP3/WMA CD-R
or CD-RW disc, seeUsing an MP3 on page 287
later in this section.
285