Technology for driving comfort and safety
90
Deactivating DSC
Press the button for at least 3 seconds; the indi-
cator lamps for DSC in the instrument cluster 
light up. Dynamic Traction Control DTC and 
DSC have been simultaneously deactivated. 
Stabilizing and drive-output promoting actions 
are no longer executed.
In the same way as with a differential interlock, 
even if DSC is deactivated, brake actions are 
still performed on the rear axle to enhance drive 
output if the drive wheels experience a signifi-
cant loss of traction.
To increase vehicle stability, activate DSC again 
as soon as possible.
Activating DSC
Press the button again; the indicator lamps in 
the instrument cluster go out.
For better control
If the indicator lamp flashes: 
DSC controls the drive forces and 
brake forces.
If the indicator lamps are on: 
DSC is deactivated.
DTC Dynamic Traction Control
DTC is a version of DSC in which the drive out-
put is optimized for particular road conditions, 
e.g. unplowed snow-covered roads. The sys-
tem assures the maximal drive output, but with 
reduced driving stability. It is therefore neces-
sary to drive with appropriate caution.
In the same way as with a differential interlock, 
even if DTC is activated, brake actions are still 
performed on the rear axle to enhance drive output if the drive wheels experience a signifi-
cant loss of traction.
You may find it useful to briefly activate DTC 
under the following special circumstances:
>When driving uphill on snow-covered roads, 
in slush or on unplowed, snow-covered 
roads
>When rocking a stuck vehicle free or start-
ing off in deep snow or on loose ground
>When driving with snow chains
Activating DTC
Press the button; the indicator lamps for DTC in 
the instrument cluster come on.
For better control
If the indicator lamp flashes: 
DTC controls the drive forces and 
brake forces.
If the indicator lamps are on: 
DTC has been activated.
Deactivating DTC
Press the button again; the DTC indicator 
lamps in the instrument cluster go out.
xDrive*
xDrive is your BMW's four-wheel-drive system. 
The combined efforts of xDrive and DSC help to 
further optimize traction and driving dynamics. 
The xDrive four-wheel-drive system distributes 
driving power variably to the front and rear axles 
depending on the driving situation and road 
conditions. 
Replacing components
234 For information on continuing to drive with a 
damaged tire, refer to Indication of a flat tire on 
page93.
The symbol identifying Run-Flat Tires is a circle 
with the letters RSC on the sidewall, refer to 
Run-Flat Tires, page221.
When mounting new tires or changing over 
from summer to winter tires and vice versa, 
mount Run-Flat Tires for your own safety. In the 
event of a flat, no spare wheel is available. Your 
BMW center will be glad to advise you. Refer 
also to New wheels and tires, page221.
The tools for changing wheels are avail-
able as optional accessories from your 
BMW center.<
Jack mounting points
The jacking points are at the positions shown in 
the illustration.
Vehicle battery
Battery care
The battery is 100 % maintenance-free, the 
electrolyte will last for the life of the battery 
when the vehicle is operated in a temperate cli-
ma te. Your BM W center will be glad to advise in 
all matters concerning the battery.
Charging the battery
Only charge the battery in the vehicle via the 
terminals in the engine compartment with the 
engine off. Connections, refer to Jump starting 
on page237.
Disposal
Have old batteries disposed of by your 
BMW center or hand them in to a recy-
cling center. Maintain the battery in an upright 
position for transport and storage. Always 
secure the battery against tipping over during 
transport.<
Power failure
After a temporary power loss, the functioning of 
some equipment may be limited and require 
reinitialization. Individual settings may likewise 
have been lost and will have to be programmed:
>Time and date 
These values must be updated, refer to 
page81.
>Radio 
In some cases, stations may have to be 
stored again, refer to page166.
>Navigation system 
Operability must be waited for, refer to 
page132.
>Glass roof
It may happen that the roof can only be 
raised. The system must be initialized. 
Please contact your BMW center.
>Seat and mirror memory
The positions must be stored again, refer to 
page50.
>Inside rearview mirror with digital compass
The system must be calibrated, refer to 
page112.
Fuses
Never attempt to repair a blown fuse and 
do not replace a defective fuse with a sub-
stitute of another color or amperage rating, oth-
erwise this could lead to a circuit overload, ulti-
mately resulting in a fire in the vehicle.<