2007 Alfa Romeo GT display

GETTING TO KNOW YOUR CAR
76
WATER IN DIESEL
FUEL FILTER
(diesel versions)
Message + symbol are displayed when
travelling to indicate that there is water in
the diesel fuel filter.
DIESEL PARTICULATE
FILTER CLOGGED
(diesel versions)
(upon request for
versions/markets
where applicable)
Message + symbol are displayed when the
diesel particulate filter is clogged and the dri-
ving conditions do not enable to activate au-
tomatically the reclaiming procedure.
To enable the cleaning procedure, keep the
car running until the message + symbol turn
off. Glow plug warming failure
Message + symbol are displayed when
there is a failure in the glow plug warming
system. Contact Alfa Romeo Authorized Ser-
vices as soon as possible to have the fault
eliminated.
ch
The presence of water in
the fuel circuit may cause
serious damage to the en-
tire injection system and cause ir-
regular engine operation. If mes-
sage + symbol are displayed on the
reconfigurable multifunction display
contact Alfa Romeo Authorized
Services as soon as possible to
have the system relieved. If the
above indications come on immedi-
ately after refuelling, water has
probably been poured into the
tank: turn the engine off immedi-
ately and contact Alfa Romeo Au-
thorized Services.

GETTING TO KNOW YOUR CAR
77
INEFFICIENT ABS
SYSTEM (where
provided) (amber)
Turning the ignition key to MARthe warn-
ing light turns on, but it should go off after
few seconds.
The warning light turns on (together with
message + symbol on the display) when the
system is inefficient. In this case the brak-
ing system keeps its effectiveness un-
changed, but without the potential offered
by the ABS system.
Caution is advisable, particularly in all cas-
es of less than perfect grip. It is necessary
to contact Alfa Romeo Authorized Services
as soon as possible.
INEFFICIENT EBD
ELECTRONIC
BRAKING
DISTRIBUTOR (red)
(amber)
The turning on at the same
time of warning lights
xand>(togeth-
er with message + symbol on the display)
with the engine running indicates an EBD
system failure; in this case heavy braking
may cause the rear wheels to lock before
time, with the possibility of skidding.
Drive with the utmost care to the nearest
Alfa Romeo Authorized Service to have the
system checked.
INERTIAL FUEL
CUT-OFF SWITCH
Message + symbol are displayed when the
inertial fuel cut-off switch is triggered.
s>x
>
If after the message you
smell fuel or see leaks from
the fuel system, do not re-
set the switch to avoid fire risk.

GETTING TO KNOW YOUR CAR
78
VDC SYSTEM
(where provided)
(amber)
Turning the ignition key to MARthe warn-
ing light turns on, but it should go off after
few seconds.
If the warning light does not turn off or
stays on when travelling (together with mes-
sage + symbol on the display), contact Al-
fa Romeo Authorized Services.
The warning light flashes when the VDC
system cuts in.
ASR (WHEEL
ANTISKID SYSTEM)
(where provided)
(amber)
Turning the ignition key to MAR, the
warning light turns on, but it should go off
after few seconds.
The warning light turns on when the sys-
tem is switched off. The warning light flash-
es when the system cuts in, to alert the dri-
ver that the system is adapting to the road
surface grip conditions.
The turning on of the warning light (to-
gether with message + symbol on the dis-
play) also indicates a failure of the ASR sys-
tem. In this case contact Alfa Romeo Au-
thorized Services as soon as possible.
FRONT
PASSENGER’S AIR
BAG DEACTIVATED
(amber)
(upon request for
versions/markets where
applicable)
With passenger’s front air bags ON, turn-
ing the ignition key to MARthe warning
light turns on, but it should go off after about
4 seconds.
The warning light turns on when the pas-
senger’s front Air bag is deactivated.
FáV
Warning light Findi-
cates also warning light
¬
failures. This is indicated by
intermittent flashing, over 4 sec-
onds, of warning light
F. In this
event warning light
¬could not in-
dicate safety system failures. Con-
tact Alfa Romeo Authorized Ser-
vices to have the system checked
immediately.

GETTING TO KNOW YOUR CAR
79
FUEL RESERVE
(amber)
The warning light turns on (on certain ver-
sions with the message on the display)
when about 7 litres fuel are left in the tank
and, on certain versions when the cruising
range is less than 50 km.
LEFT-HAND
DIRECTION
INDICATOR (green)
The warning light turns on when the di-
rection indicator stalk is moved downwards
or, together with the right indicator, when
the hazard warning light button is pressed.
RIGHT-HAND
DIRECTION
INDICATOR (green)
The warning light turns on when the di-
rection indicator stalk is moved upwards or,
together with the left indicator, when the
hazard warning light button is pressed.
SIDE/TAILLIGHTS
(green)
The warning light turns on when side/tail-
lights or low beams are turned on.
CRUISE CONTROL
(where provided)
(green)
The warning light turns on (on certain ver-
sions with message + symbol on the dis-
play) when turning the Cruise Control
knurled ring to ON.
MAIN BEAMS
(blue)
The warning light turns on when the main
beams or the “Follow me home” device are
turned on (see the relevant paragraph).
EXTERNAL LIGHTS
FAILURE
(amber)
Turning the ignition key to MAR, the
warning light turns on, but it should go off
after few seconds.
The display will show message + symbol
when one of the following lights is failing:
❒side/taillights
❒brake lights and relevant fuse
❒rear fog lights
❒number plate lights.
The failure referring to these lights could
be: one or more blown bulbs, a blown pro-
tection fuse or an electric connection cut-off.
WK
R
E
3
Ü
1

GETTING TO KNOW YOUR CAR
80
WARNING LIGHTS
FAILURE
The message will be displayed when one
of the following warning lights is failing: ABS
warning light, EBD warning light, ASR warn-
ing light, VDC warning light.
ENGINE OIL
LEVEL SENSOR
The warning light turns on when a fault
is detected to the engine oil level sensor.
Contact Alfa Romeo Authorized Services as
soon as possible to have the failure elimi-
nated.
SPEED LIMIT EXCEEDED
The display will show the dedicated mes-
sage + symbol and the buzzer will sound
when the car exceeds the speed limit set
previously (see “Reconfigurable multifunc-
tion display”).
RANGE (Trip Computer)
The display will show the dedicated mes-
sage + symbol when the cruising range is
less than 50 km.
SCHEDULED SERVICING
The display will show the dedicated mes-
sage starting from 2000 km from the dead-
line planned in the Service Schedule. The
message will be repeated every 200 km
when turning the ignition key to MAR.
POSSIBLE
PRESENCE
OF ICE
ON THE ROAD
The display shows message + symbol √and a buzzer will sound when the outside
temperature reaches or falls below 3°C to
warn the driver of the possible presence of
ice on the road.
The buzzer will sound for approx. 2 sec-
onds whereas the message will stay on the
display for aprrox. 10 seconds then, only
the symbol will stay displayed until tem-
perature exceeds 6°C or until the engine
is switched off.
If when travelling, next to the indication
of possible ice on road, the temperature will
raise above 6° C symbol
√will turn off. If
temperature falls again below 3° C a new
message (outside temperature flashing) +
symbol
√will be displayed together with
the sound of the buzzer.
√

GETTING TO KNOW YOUR CAR
92
CONTROLS(fig. 97)
1- Inside temperature set display (dri-
ver’s side)
2- Inside temperature adjustment knob
(driver’s side)
3- Fan speed set and system off display
(
OFF)
4- Knob for adjusting the fan speed and
switching the system off
5- Inside temperature set display (pas-
senger’s side)
6- Inside temperature adjustment knob
(passenger’s side)
7- Maximum defrosting/demisting
on/off button for windscreen and front
side windows, rearscreen heating and
wing mirror coils (
MAX-DEFfunction)
8- Inside air re-circulation on/off button
v(manual/automatic)
9- Rearscreen heating and wing mirror
defrosting on/off button
(
10- Air distribution selection buttons 11- Inside air temperature sensor
12- Button for aligning the temperature
set on the passenger’s side with that on
the driver’s side
MONO
13- Button for selecting the system
automatic mode
AUTO
14- Climate control compressor on/off
enable button
√
fig. 97
A0A0090b

GETTING TO KNOW YOUR CAR
93
HOW TO USE
THE AUTOMATIC TWO-ZONE
CLIMATE CONTROL SYSTEM
(fig. 97)
IMPORTANTThe knob rings do not
have a mechanical stopper therefore, once
the maximum or minimum value has been
reached, they are free to turn in both
directions.
The system can be started in different
ways, but it is advisable to set the tem-
peratures required on the displays; then
press the (13)
AUTObutton.
This way the system will start working
completely automatically to reach the
temperatures set as quickly as possible
and then maintain them.
During completely automatic system
operation, the temperatures set can be
changed at any time; the system will auto-
matically change its settings to adjust to
the new requirements. IMPORTANTTo be able to be accepted
by the system, the difference in the tem-
perature between the driver’s and passen-
ger’s side must be within a range of 7°C.
It is possible to personalise the choices
made automatically by the system inter-
veningmanually on the following controls:
- fan speed adjustment knob (4)
- air distribution selection buttons (10)
- inside air re-circulation on/off button
(8)
v
- climate control on enable button (14)
√.
Manually selecting one or more of these
functions turns off the right led on the but-
ton (13)
AUTO.With one or more functions engaged
manually, the adjustment of the tempera-
ture of the air admitted to the passenger
compartment continues to be controlled
automatically by the system (left led on
button13
AUTOon) except with the cli-
mate control compressor off.
In fact, in this condition the air admitted
to the passenger compartment cannot
have a lower temperature than the out-
side air; this condition is indicated by the
turning off of the two leds on button (13)
AUTOand flashing on the display (1)
and/or (5) related with the temperature
rate that cannot be obtained.

GETTING TO KNOW YOUR CAR
94
AIR TEMPERATURE
ADJUSTMENT KNOBS
(fig. 98)
Turning the rings of knobs (2or6),
clockwise or counter-clockwise, respective-
ly highers or lowers the temperature of
the air required respectively in the left
zone (knob 2) or right zone (knob 6) of
the passenger compartment. The temper-
atures set are shown on the displays (1)
and (5) above the knobs.
Separate operation of the temperatures
set is restored automatically using knob
(6).
Turning the knob rings clockwise or
counter-clockwise until they reach the
extreme selections HIorLO, the maxi-
mum heating or cooling functions are
respectively engaged:
A0A0204b
fig. 98