2007 Acura RDX service reset

This indicator comes on for a few
seconds when you turn the ignition
switch to the ON (II) position. It
remindsyouthatitistimetotake
your vehicle in for scheduled
maintenance. The maintenance main
items and sub items will be displayed
in the information display. See page
for more information on the
maintenance minder.
This indicator goes off when your
dealer resets it after completing the
required maintenance service. This
indicator comes on when there
is a system message in the multi-
information display. Press the INFO
button on the steering wheel (see
page ) to see the message (see
page ).
This indicator comes on when the
washer fluid level is low. Add washer
fluid when you see this indicator
(see page ).
Most
of the time, this indicator
comes on along with other indicato rs
in the instrument panel such as the
seat belt reminder indicator, SRS
indicato r, VSA system indicato r, etc. Your
vehicle has a door and tailgate
open monitor on the information
display. If any door(s) or the tailgate
is not closed tightly, the appropriate
light/lights will come on to reminds
you to close the tailgate or the
door(s).
The door and tailgate open monitor
appears on the multi-inf ormation
display (see page ).
79
330
35384
86
On RDX model only
On RDX with Technology Package
model only
Canadian RDX model only On RDX with Technology Package
model only
On RDX model
Instrument Panel Indicators
Maintenance Minder
Indicator
System Message
Indicator
Washer Level IndicatorDoor and T ailgate Open Monitor
74
——
y

y
() yy

This shows the estimated distance
you can travel on the fuel rema ining
in the fuel tank. This distan ce is
estimated from the fuel economy
you received over the last several
miles(U.S.) or kilometers (Canada),
so it will vary with changes in speed,
traffic, etc.
This shows the time traveled since
you last reset it. When you turn the
ignition switch to the ON (II)
pos ition, ELAPSED TIME is reset.
You can customize the ELAPSED
TIME reset condition in the multi-
info rmation display (see page ).You
can customize the Trip A and
AVG. FUEL A reset condition in the
multi-info rmation display (see page
).
This
shows your vehicle’s average
fuel economy in mpg (U.S. model s)
or
/100 km (Canadian models)
since you last reset the Trip A or
Trip B.
When
you reset Trip A, AVG.
SPEED is also reset.
This
shows the average speed you
are traveling in miles per hour (mph)
forU.S.modelsorkilometersper
hour (km/h) for Can adian models.
When the battery is disconnect ed, or
you refuel, RANGE is also reset.
The
multi -information display in the
instrument panel shows you the
engine oil life and maintenance
service items when the ignition
switch is in the ON (II) position. This
information helps to keep you aware
of the periodic maintenance your
vehicle needs for continued trouble-
free driving. Refer to page for
more inf ormation.
This shows your current f uel
mileage.
When you turn of f the engine, INST.
MPG or INST. L/100 km is also
reset.
The average f uel mileage will be
reset when you reset the trip meter,
or if the vehicle’s battery goes dead
or is disconnected.98
100
330
Multi-Inf ormation Display
RANGE
EL A PSED T IME
AVG. FUEL A/B A VG. SPEED
Maintenance Minder
INST.MPG(U.S.models)/INST.
L /100km (Canadian models)
82
——
y
y
() yy

µ
µ
µ
µ µ
µ To
set your AcuraLink preferences
(thetypesofmessagesyouwantto
receive, if an y), visit the Own er Link
website at
www.ow ners.acura.com,
and choose what you would like to
receive. If you do not have internet
access, call Acura Client Services at
(800) 382-2238; they can set your
message preferences for you.
Select
this button to
delete the current message.
Select this button to hear a
voice read the entire message. This
gives you more information than the
screen can display at one time. When
you select the Voice button, it
ch anges to a Stop Reading button.
Select the button again to stop the
voice.
Select this button to call a
phone number embedded in the
message. When you select , the
HandsFreeLink (HFL) dials the
number for you.
To make a call, your Bluetooth
compatible phone must be paired to
your vehicle’s HandsFreeLink (see
page ).
Select this button to f ind the nearest
Acura dealer using the navigation
system. Select
this button to call the Acura dealer
you purchased your vehicle f rom.
AcuraLink also directs you to this
dealer so you can schedule a
maintenance appointment or receive
inf ormation about a message. If you
visit another dealer f or service two
times within a 14-month period,
AcuraLink will reset to call that
dealer.
Select this
button to get more inf ormation about
the current diagnostic message. To
use this option, your cell phone must
be linked to the HFL and have a
compatible data service available.
Access the Owner Link website to
f ind out which data services are
currently compatible with AcuraLink.
257
AcuraLink
Message Pref erences
Delete
Voice
Call
Call
Find Nearest Acura Dealer Call Your A cura Dealer
Diagnostic Inf o
Features
247
——
y
y
() yy

ÛÝ
Turn the engine off, and confi
rm the
fuel fill cap is installed. If it is, loosen
it, then retighten it until it clicks at
least once. When you c an restart the
engine, the message appears again.
The message goes off after several
days of norm al driving once you
tighten or replace the fuel fill cap. To
scroll to another message, press the
INFO ( / ) button.
If your fuel fill cap is loose or
missing, a ‘‘TIGHTEN FUEL CAP’’
message appears on the multi-
information display after you start
the engine.
Turn the engine off, and confi
rm the
fuel fill cap is installed. If it is, loosen
it, then retighten it until it clicks at
le ast once. When you restart the
engine, the message appears again.
The message goes off after several
days of norm al driving once you
tighten or replace the fuel fill cap. To
scroll to another display, p ress the
Select/Reset knob.
If the system still detects a leak in
your vehicle’s evaporative emissions
system, the malfunction indicator
lamp (MIL) comes on. If the fuel fill
cap was not already tightened, turn
the engine off, and check or
retighten the fuel fill cap until it
clicks at least once. The MIL should
go off after several days of normal
driving once the cap is tightened or
replaced. If the MIL does not go off,
have your vehicle inspected by a
dealer. For more information, see
page .
If the system still detects a leak in
your vehicle’s evaporative emissions
system, the malfunction indicator
lamp (MIL) comes on. If the fuel fill
cap was not already tightened, turn
the engine off, and check or
retighten
the fuel fill cap until it
clicks at least once. The MIL should
go off after several days of normal
driving once the cap is tightened or
replaced. If the MIL does not go off,
have your vehicle inspected by a
dealer. For more inf ormation, see
page . 394
394
On RDX with Technology Package
modelTighten Fuel Cap Message
Service Station Procedure
Bef ore Driving
281
——
yy
() yy

µ
µ
µ
µ
µ
µ
µ
µ
µ
µ µ
µ
Your vehicle displays engine oil life
and maintenance service items on
the information display or multi-
info rmation display (dep ending on
models) to show you when you
should have your dealer perform
engine oil replacement and indicated
maintenance services.
Based on the engine operating
conditions and accumulated engine
revolutions, the onboard computer in
your vehicle calculates the remaining
engine oil life and displays it as a
percentage. The
remaining engine oil life is
shownonthedisplayaccordingto
this table:
To see the current engine oil life,
turn the ignition switch to the ON
(II) position, and press the Select/
Reset knob repeatedly until the
engine oil lif e display appears (see
page ). 76
Calculated Engine
Oil Lif e (%)
100 % 91 % 90 % 81 %
80 % 71 %
70 % 61 %
60 % 51 %
50 % 41 %
40 % 31 %
30 % 21 %
20 % 16 %
15 % 11 %10 % 6 % 5% 1% 0% Displayed
Engine Oil Lif e (%) 100 %90 %
80 %
70 %
60 %
50 %
40 %
30 %
20 %
15 %
10 %5%
0%
On RDX model
Maintenance Minder
Engine Oil L if e Display
330
ENGINE OIL
LIFE DISPLAY SELECT/
RESET KNOB
——
y

y
() yy

To change the information display
from the engine oil life display to the
odometer or the trip meter, press
and release the Select/Reset knob.
Immediately have the service
performed, and make sure to reset
the display as described on the
following. All maintenance items displayed in
the information display are in code.
For an explanation of these
maintenance codes, see page . Your dealer will reset the display
af ter completing the required
maintenance service. You will see
‘‘OIL LIFE 100%’’ on the inf ormation
display the next time you turn the
ignition switch to the ON (II)
position.
If maintenance service is done by
someone other than your dealer,
reset the maintenance minder as
f ollows:
Press the Select/Reset knob
repeatedly until the engine oil lif e
is displayed. Turn the ignition switch to the ON
(II) position.
When the engine oil lif e is 0 percent
or negative mileage, the
maintenance minder indicator
( )remainsonevenif you
change the inf ormation display.
1.
2.
343
Maintenance Main Items and Sub
Items
Resetting the Engine Oil Lif e
Display
Maintenance Minder
Maint enance
333
MAINTENANCE MAIN ITEMMAINTENANCE SUB ITEM(S)
——
y

y
() yy

ÛÝ
ÛÝ The system message will appear
again by pressing the INFO ( / )
button af ter cancel it.
You will also see the system
message every time you turn the
ignition switch to the ON (II)
position until your vehicle have the
indicated maintenance perf ormed by
your dealer.
Negative mileage means your
vehicle has passed the maintenance
required point.
If the indicated maintenance is not
perf ormed, you will see a " SERVICE
PAST DUE" message along with the
maintenance item code(s), and the
negative mileage will be also
displayed. The negative mileage
continues to display af ter the vehicle
has been driven 10 miles (10 km) or
more. To cancel the system message, press
and release the INFO ( / ) button
on the steering wheel. At this time,
the system message indicator will
be turned of f . Then the display
will change to the engine oil lif e
display. You will see the negative
mileage blinking and a ‘‘SERVICE’’
message along with the maintenance
item code(s) on the multi-
inf ormation display. Immediately have the service
perf ormed, and make sure to reset
the display as described on the
f ollowing.
Maintenance Minder
not
Maint enance
339
U.S.
U.S.
Canada Canada
——
y

y
() yy

All maintenance items displayed in
the information display are in code.
For an explanation of these
maintenance codes, see page . Press and hold the SEL/RESET
button on the steering wheel f or
more than 10 seconds. The
remaining engine oil lif e reset
mode will be shown on the multi-
inf ormation display.
Press the SEL/RESET button on
the steering wheel until you see
the engine oil lif e display. Turn the ignition switch to the ON
(II) position.
If maintenance service is done by
someone other than your dealer,
reset the maintenance minder as
f ollows: Your dealer will reset the display
af ter completing the required
maintenance service. You will see
‘‘OIL LIFE 100%’’ on the display the
next time you turn the ignition
switch to the ON (II) position.
1.
2.
3.
343
Maintenance Minder
Maintenance Main Items and Sub
Items Resetting the Engine Oil Lif e
Display
340
MAINTENANCE MAIN ITEMMAINTENANCE SUB ITEM(S)
——
y

y
() yy