Page 320 of 479

Help assure your vehicle’s f uture
reliability and perf ormance by paying
extra attention to how you drive
during the f irst 600 miles (1,000 km).
During this period:Avoid full-throttle starts and rapid
acceleration.
Do not change the oil until the
scheduled maintenance time. Avoidhardbrakingforthefirst
200 miles (300 km).
Do not tow a trailer.
You should also f ollow these
recommendations with an
overhauled or exchanged engine, or
when the brakes are replaced. Your vehicle is designed to operate
on premium unleaded gasoline with a
pump octane of 91 or higher. If this
octane grade is unavailable, regular
unleaded gasoline with a pump
octane of 87 or higher may be used
temporarily. The use of regular
unleaded gasoline can cause metallic
knocking noises in the engine and
will result in decreased engine
perf ormance. The long-term use of
regular-grade gasoline can lead to
engine damage.
We recommend quality gasolines
containing detergent additives that
help prevent f uel system and engine
deposits.
In addition, in order to maintain good
perf ormance, f uel economy, and
emissions control, we strongly
recommend, in areas where it is
available, the use of gasoline that
does NOT contain manganese-based
f uel additives such as MMT.Use of gasoline with these additives
may adversely af f ect perf ormance,
and cause the malfunction indicator
lamp on your instrument panel to
come on. If this happens, contact
your authorized dealer f or service.
Some gasoline today is blended with
oxygenates such as ethanol or
MTBE. Your vehicle is designed to
operate on oxygenated gasoline
containing up to 10% ethanol by
volume and up to 15% MTBE by
volume. Do not use gasoline
containing methanol.
If you notice any undesirable
operating symptoms, try another
service station or switch to another
brand of gasoline.
For f urther important f uel-related
inf ormation, please ref er to your
.
Break-in Period Fuel Recommendation
Quick Start Guide
Break-in Period, Fuel Recommendation
316
——y
y
()-y
y
Page 392 of 479

You may use a synthetic motor oil if
it meets the same requirements
given f or a conventional motor oil, it
displays the API Certif ication Seal
and it is the proper weight. You must
f ollow the oil and f ilter change
intervals given in the maintenance
schedule.Open the hood, and remove the
engine oil f ill cap. Remove the oil
drain bolt and washer f rom the
bottom of the engine. Drain the oil
into an appropriate container.
Your vehicle does not require any oil
additives. Additives may adversely
af f ect the engine or transmission
perf ormance and durability.
Run the engine until it reaches
normal operating temperature,
then shut it off.
Changing the oil and f ilter requires
special tools and access f rom
underneath the vehicle. The vehicle
should be raised on a service station-
type hydraulic lif t f or this service.
Unless you have the knowledge and
proper equipment, you should have
this maintenance done by a skilled
mechanic. Always change the oil and f ilter
according to the maintenance
messages shown on the multi-
inf ormation display. The oil and f ilter
collect contaminants that can
damage your engine if they are not
removed regularly.
1.
2.
Synthetic Oil
Engine Oil A dditives
Changing the Engine Oil and
Filter
A dding Engine Oil, Changing the Engine Oil and Filter
388
WASHER
DRAIN BOLT
——y
y
()-yy
Page 469 of 479

CONT INUED
BatteryCharging System ...........................
Indicator . 65, 430
............................
Jump Starting .426
..............................
Maintenance .415
............................
Specif ications .447
..............................
Bef ore Driving .315
....................................
Belts,Seat .8,20
.........................
Beverage Holders .161
..................................
Booster Seats .55
Brakes ...........
Anti-lock System (ABS) . 349 .............
Break-in, New Linings . 316
...........................................
Fluid .395
....................
Bulb Replacement .400
.......................................
Parking .151
.................
System Indicator . 65, 432
........................
Wear Indicators .348
.............................
Braking System .348
.................
Break-in, New Vehicle . 316
Brightness Control, ...............................
Instruments .123
......................
Brights, Headlights .118
Bulb Replacement ..........................
Back-up Lights .401
..............................
Brake Lights .400
................
Front Parking Lights . 398
........
Front Side Marker Lights . 398
.................................
Headlights .397
.................................
Rear Bulbs .400
............................
Specif ications .447
....................
Turn Signal Lights . 398
..............................
Bulbs, Halogen .397
...
Accessories and Modif ications . 322
ACCESSORY (Ignition Key .....................................
Position) .129
............
Accessory Power Sockets . 164
...........................
AC Power Outlet .165
................
Active Damper System . 353
.....................................
Acura Link .303
....................
Additives, Engine Oil . 388
...............................
Airbag (SRS) .9, 24
..............
Air Conditioning System . 168
.....................
Rear A/C Control .173
.......................
Air Outlets (Vents) .175
.......................
Air Pressure, Tires .410
......................................
Antif reeze .390
Anti-lock Brakes (ABS) ....................
Indicator Light . 66, 349
...................................
Operation .349
..............
Anti-thef t, Audio System . 231
Anti-thef t Steering Column ............................................
Lock .129
................
Audio System . 178, 179, 198
Auto Control Mode, Starting ........................................
Engine .331
..........
Automatic Climate Control . 168.......................
Automatic Lighting .119
...
Automatic Seat Belt Tensioners . 22
.............
Automatic Speed Control . 266
..............
Automatic Transmission . 333
..........................
Capacity, Fluid .446
...............
Checking Fluid Level . 393
.......................................
Shif ting .333
Shif t Lever Position ...............................
Indicators .333
................
Shif t Lever Positions . 334
....................
Shif t Lock Release . 338
Index
A
B
INDEX
I
——y
y
()-yy