2007.5 Peugeot 308 Owner's Manual

!
i
80
Coupling with the "Follow-me-home" lighting
Association with the automatic lighting provides the "follow-me-home" lighting with the following additional options:
- selection of the duration of maintaining of the lighting for 15, 30 or 60 seconds in the vehicle parameters on the multi-function display configuration menu,- automatic activation of "follow-me-home" lighting when automatic light-ing is in operation.
Automatic lighting
The side lights and dipped headlamps are switched on automatically, without any action on the part of the driver, when a low level of external light is de-tected or in certain cases of activation of the windscreen wipers.
As soon as the brightness returns to a sufficient level or after the windscreen wipers are switched off, the lights are switched off automatically.
Activation
 Turn ring A to the "AUTO" position. The automatic lighting is accompa-nied by a message on the multifunc-tion display.
Deactivation
 Turn ring A to a position other than "AUTO". Deactivation is accompa-nied by a message on the multifunc-tion display.
Operating fault
In the event of a malfunction of the brightness sensor, the lights come on, this warning light is displayed on the instrument panel and/or a message appears on the multifunction display, accompanied by an audible signal.
In this case, contact a PEUGEOT dealer.
MANUAL HEADLAMP
ADJUSTMENT
To avoid causing a nuisance to other road users, the height of the halogen headlamps should be adjusted in rela-tion to the load in the vehicle.
0. 1 or 2 people in the front seats.
-. 3 people.
1. 5 people.
2. 5 people + maximum authorised load.
3. Driver + maximum authorised load.

!
i
81
DIRECTIONAL LIGHTING
When the dipped or main beam head-lamps are on, this function enables the light beam to follow the direction of the road.
The use of this function, coupled with the xenon headlamps only, consider-ably improves the quality of your light-ing when cornering.
with directional lighting
without directional lighting
Programming
Operating fault
The function is activated or deactivated via the multi-function display configura-tion menu.
If a malfunction occurs, this warning light flashes on the in-strument panel, accompanied by a message on the multifunc-tion display.
Contact a PEUGEOT dealer.
AUTOMATIC ADJUSTMENT
OF THE DIRECTIONAL
HEADLAMPS
In order to avoid causing a nuisance to other road users, this system corrects the height of the xenon headlamps beam automatically and when stationary, in re-lation to the load in the vehicle.
If a malfunction occurs, this warning light and/or the service warning light is displayed on the instrument panel, accompanied by an audible signal and a message on the multifunction display.
The system then places your headlamps inb the lowest position.

!
i
81
DIRECTIONAL LIGHTING
When the dipped or main beam head-lamps are on, this function enables the light beam to follow the direction of the road.
The use of this function, coupled with the xenon headlamps only, consider-ably improves the quality of your light-ing when cornering.
with directional lighting
without directional lighting
Programming
Operating fault
The function is activated or deactivated via the multi-function display configura-tion menu.
If a malfunction occurs, this warning light flashes on the in-strument panel, accompanied by a message on the multifunc-tion display.
Contact a PEUGEOT dealer.
AUTOMATIC ADJUSTMENT
OF THE DIRECTIONAL
HEADLAMPS
In order to avoid causing a nuisance to other road users, this system corrects the height of the xenon headlamps beam automatically and when stationary, in re-lation to the load in the vehicle.
If a malfunction occurs, this warning light and/or the service warning light is displayed on the instrument panel, accompanied by an audible signal and a message on the multifunction display.
The system then places your headlamps inb the lowest position.

82
WIPER CONTROLS
System for selection and control of the various front and rear wiping modes for the elimination of rain and cleaning.
The vehicle’s various front and rear wip-ers are designed to improve the driver’s visibility progressively in relation to the climatic conditions.
Manual controls
The wiper commands are issued direct-ly by the driver by means of the lever A and the ring B.Model with intermittent wiping
Model with AUTO wiping
fast (heavy rain),
normal (moderate rain),
intermittent (proportional to the speed of the vehicle),
automatic, then single wipe (see following page).
park,
single wipe (press downwards),
Programming
Various automatic wiper control modes are also available according to the fol-lowing options:
- automatic wiping for the windscreen wipers,- rear wiping on engaging reverse gear.
Windscreen wipers
A. wiping speed selection lever:
or

!
83
Windscreen and headlamp washB. rear wiper selection ring:
park,
intermittent wipe,
wash-wipe (set duration).
Reverse gear
When reverse gear is engaged, the rear wiper will come into operation if the windscreen wipers are operating.
Programming
 Pull the windscreen wiper stalk to-wards you.
The windscreen wash then the wind-screen wipers operate for a fixed period.
If the dipped headlamps are on,the headlamp washers operate at the same time.
Rear wiper
The function is activated or deactivated via the multi-function display configura-tion menu.
This function is activated by default.
Screenwash/headlamp wash low
In the case of vehicles fitted with head-lamp washers, when the mini-mum level of the reservoir is reached, this warning light and/or the service warning light is displayed on the instrument panel, ac-companied by an audible signal and a message on the multifunction display.
Next time you stop, fill the screenwash/headlamp wash reservoir.
The warning light is displayed when the ignition is switched on, or every time the stalk is operated, until the reservoir is filled.

!
i
i
84
Special position of the windscreen wipersAutomatic windscreen wiping
The windscreen wipers operate auto-matically, without any action on the part of the driver, if rain is detected (sensor behind the interior mirror), adapting their speed to the intensity of the rainfall.
Activation
This is controlled manually by the driver by pushing lever A to the "AUTO"position.
It is accompanied by a message on the multifunction display.
In the minute following switching off of the ignition, any action on the stalk po-sitions the wipers in the centre of the windscreen.
This action enables you to position the wiper blades for winter parking, clean-ing or replacement.
To park the wipers after this has been done, switch on the ignition and operate the stalk.
Switching off
This is controlled manually by the driver by moving lever A upwards and returning it to position "0".
It is accompanied by a message on the multifunction display.
Operating fault
If an automatic wiping malfunction occurs, the wipers will operate in inter-mittent mode.
Contact a PEUGEOT dealer to have the system checked.

!
i
i
84
Special position of the windscreen wipersAutomatic windscreen wiping
The windscreen wipers operate auto-matically, without any action on the part of the driver, if rain is detected (sensor behind the interior mirror), adapting their speed to the intensity of the rainfall.
Activation
This is controlled manually by the driver by pushing lever A to the "AUTO"position.
It is accompanied by a message on the multifunction display.
In the minute following switching off of the ignition, any action on the stalk po-sitions the wipers in the centre of the windscreen.
This action enables you to position the wiper blades for winter parking, clean-ing or replacement.
To park the wipers after this has been done, switch on the ignition and operate the stalk.
Switching off
This is controlled manually by the driver by moving lever A upwards and returning it to position "0".
It is accompanied by a message on the multifunction display.
Operating fault
If an automatic wiping malfunction occurs, the wipers will operate in inter-mittent mode.
Contact a PEUGEOT dealer to have the system checked.

i
i
!
85
COURTESY LIGHTS
Selection and control of the various passenger compartment lights.
1. Front courtesy light
2. Map reading lights
3. Rear side reading lights
4. Rear courtesy light
Front and rear courtesy lights
In this position, the courtesy light comes on gradually:
Map reading lights
 With the ignition on, press the cor-responding switch.
- when the vehicle is unlocked,- when the key is removed from the ignition,- when a door is opened,- when the remote control locking button is activated, in order to locate your vehicle.
It switches off gradually:
- when the vehicle is locked,- when the ignition is switched on,- 30 seconds after the last door is closed.
Permanently off.
Permanent lighting.
Rear side reading lights
 With the ignition on, the first press of the corresponding switch switches on the reading light concerned in permanent lighting mode.
Following a second press, it comes on:
- when the vehicle is unlocked,
- when the key is removed from the ignition,
- when a door is opened,
- when the remote control locking button is pressed, in order to locate your vehicle.
It switches off gradually:
- when the vehicle is locked,- when the ignition is switched on,- 30 seconds after the last door is closed.