2007.5 Peugeot 307 ECU
[x] Cancel search: ECUPage 56 of 212
COMFORT
54
5 . H e a d r e s t r a i n t h e i g h t a n d a n g l e a d j u s t m e n t
To raise the head restraint, pull it up-
wards.
To remove the head restraint, press
the lug A and pull the head restraint
upwards.
To put the head restraint back in po-
sition, locate the stems of the head
restraint in the holes, taking care to
keep them in line with the seat back.
To lower the head restraint, press the
lug A and the head restraint.
The head restraint frame has a catch
which prevents it from lowering; this
safety device provides protection in
the event of an impact.
To tilt the head restraint, tilt the lower
part forwards or backwards.
REAR HEAD RESTRAINTS
Never drive with the head
restraints removed; they
should be in place and cor-
rectly adjusted.
These have a high position for when
they are in use and a low position for
when they are stored.
The head restraints are removable.
To remove them, pull upwards as far
as the stop then press the lug.
6 . A r m r e s t s
These can be folded down and are
removable.
To remove them, press the button lo-
cated between the armrest and the
side of the seat and pull it.
7 . S t o r a g e d r a w e r s
There is a storage drawer under each
front seat.
- To open it, lift it and pull.
- To take it out, open it to its full ex-
tent, press the ends of the slides
and lift it, then remove it com-
pletely.
- To put it back in place, at the end of its travel, press on the top of
the drawer to secure it.
Under the front passenger seat, the
l a y o u t o f t h e l o o r a l l o w s f o r s t o r a g e
o f a i r s t a i d k i t a n d a w a r n i n g t r i a n g l e
(small version).
T h e a d j u s t m e n t i s c o r r e c t w h e n
t h e u p p e r e d g e o f t h e h e a d r e -
s t r a i n t i s l e v e l w i t h t h e t o p o f t h e
h e a d . Do not place heavy objects
in the drawers.
Page 62 of 212
59
COMFORT
LOCATION OF CHILD SEATS SECURED USING THE SEAT BELT
In accordance with the European regulation (Directive 2000/3), this table indicates the options for the installation of child seats
secured using the seat belt and universally approved (a) dependi ng on the weight of the child and the seat in the vehicle:
(a) Universal child seat: child seat which can be installed in all vehicles using the seat belt.
(b) Group 0: from birth to 10 kg.
(c) Consult the current legislation in your country before instal ling your child on this seat.
U : seat suitable for the installation of a child seat secu red using the seat belt and universally approved, "rear facing" a nd/or
"forwards facing".
U ( R ) : identical to U , but the vehicle seat must be adjusted to the highest po sition.
Seat
W e i g h t o f t h e c h i l d /indicative age
B e l o w 1 3 k g(groups 0 (b) and 0+) Up to 1 year approx
9 t o 1 8 k g (group 1) 1 to 3 years approx
1 5 t o 2 5 k g (group 2) 3 to 6 years approx
2 2 t o 3 6 k g (group 3) 6 to 10 years approx
Front passengerseat (c)
- i x e d
-
height adjustable (R)
U
U ( R )
U
U ( R )
U
U ( R )
U
U ( R )
Rear side seats
U U U U
Rear centre seat U U U U
Page 64 of 212
61
COMFORT
These are two rings located between
the seat back and the seat cushion.
T h e I S O F I X c h i l d s e a t s a r e i t t e d
with two locks which are secured
easily on these rings. T h e s e s e a t s a r e i t t e d w i t h I S O F I X
mountings. This ISOFIX mounting system guar-
a n t e e s r e l i a b l e , s a f e a n d f a s t i t t i n g o f
the child seat in your vehicle.
Page 65 of 212
COMFORT
62
T h e s e c h i l d s e a t s c a n a l s o b e u s e d o n s e a t s w h i c h a r e n o t i t t e d w i t h I S O F I X m o u n t i n g s . I n t h i s c a s e , i t i s e s s e n t i a l
that they are secured to the vehicle's seat by means of the thre e point seat belt.
F o l l o w t h e i n s t r u c t i o n s f o r i t t i n g t h e c h i l d s e a t i n d i c a t e d i n t h e s e a t m a n u f a c t u r e r ' s i n s t a l l a t i o n g u i d e .
I S O F I X C H I L D S E A T S R E C O M M E N D E D B Y P E U G E O T A N D A P P R O V E D F O R Y O U R V E H I C L E
I S O F I X K I D D Y I S O F I X R Ö M E R D u o P l u s
G r o u p 0 + : f r o m b i r t h t o 1 3 k g G r o u p 1 : f r o m 9 t o 1 8 k g G r o u p 1 : f r o m 9 t o 1 8 k g
Installed in the rear facing position. Installed in the forwards facing position. Installed in the forwards facing position only.
The body of the child seat must be in contact with the back of the vehicle's front seat.
It is essential that the vehicle's front seat is adjusted to the intermediate lon-gitudinal position.
Secured without the top strap.
Three child seat body angles: sitting, reclining and lying positions.
Adjust the vehicle's front seat so that the child's feet do not touch the seat back.
Page 95 of 212
LAYOUT
85
1. Rear parcel shelf
To remove the shelf:
- unhook the two strings,
- slightly raise the shelf, then remove it.
The shelf can be stored:
- either behind the front seats,
- or behind the rear seat.
2. Hooks
3. Stowing rings
4. Luggage retaining net
Hooked onto the stowing rings, this
enables your luggage to be secured.
5. Open storage trays
6. 12 volt socket (100 W max)
This is a lighter type socket, installed
on the left-hand side of the parcel
shelf.
It is supplied from the "Running"
position.
BOOT LAYOUT (SALOON)
Page 97 of 212
LAYOUT
87
BOOT LAYOUT (ESTATE)
4 . B o o t l o o r a n d p i l l a r s t o w i n g rings
5. Rear seat stowing rings
6. Luggage retaining net
Secure the net hooks in the stowing
r i n g s o n t h e l o o r o r o n t h e f o l d e d
r e a r s e a t ( t w o h o r i z o n t a l p o s i t i o n s ) o r
secure the net hooks in the stowing
rings on the boot pillars and in the
l o o r r i n g s a t t h e r e a r o f t h e b o o t ( o n e
vertical position).
7. 12 volt socket (100 W max)
This is a lighter type socket, installed
on the load space cover left support.
It is supplied from the "Running"
position. 8 . H i g h l o a d r e t a i n i n g n e t i x i n g s
The high load retaining net can be
installed behind the front or rear
seats.
Open the covers of the corresponding
u p p e r i x i n g s .
Fit the ends of the metal bar in these
i x i n g s .
To install the high load retaining net:
- behind the front seats, lift the rear
seat cushion, hook the net straps
o n t h e i x i n g s t h e n f o l d t h e r e a r
seat;
- behind the rear seat, hook the net straps in the stowing rings on the
l o o r .
The rings are located directly below
t h e c o r r e s p o n d i n g u p p e r i x i n g s .
Pull the two straps taut.
9. Grab handles and coat hooks
1. Load space cover
To install it:
- position the front ends of the
cover on its support and press
gently to put it in place,
- unfold the cover fully,
- position the rear ends of the cover on its support and press gently to
put it in place.
To remove it:
- unclip the rear ends,
- fold the cover fully,
- unclip the front ends and remove the cover.
To store it, slide it under the rear
seats (location A ).
2. Floor storage trays (2/3 - 1/3)
3. Storage nets
One of them contains the luggage
retaining net.
Page 103 of 212
SAFETY
9 3
W h e r e v e r y o u a r e s e a t e d i n
t h e v e h i c l e , a l w a y s f a s t e n
y o u r s e a t b e l t , e v e n f o r s h o r t
j o u r n e y s . I n o r d e r t o b e e f f e c t i v e , a s e a t b e l t :
- must be tightened as close to the
body as possible,
- must restrain one adult only,
- must not bear any trace of cuts or fraying,
- must be pulled in front of you with a s m o o t h m o v e m e n t , c h e c k i n g
that it does not twist,
- m u s t n o t b e t r a n s f o r m e d o r m o d i i e d t o a v o i d a l t e r i n g i t s p e r f o r m a n c e .
In accordance with current safety
regulations, all repairs and checks
must be carried out by a PEUGEOT
dealer who guarantees that the work
i s c a r r i e d o u t c o r r e c t l y .
H a v e y o u r s e a t b e l t s c h e c k e d r e g u -
larly by a PEUGEOT dealer and par-
ticularly if the straps show signs of
d a m a g e .
Clean the seat belt straps with soapy
w a t e r o r a t e x t i l e c l e a n i n g p r o d u c t ,
s o l d b y P E U G E O T d e a l e r s .
A f t e r f o l d i n g o r m o v i n g a s e a t o r r e a r
bench seat, ensure that the seat belt
i s p o s i t i o n e d a n d r o l l e d u p c o r r e c t l y . Recommendations for children:
- use a suitable child seat if the pas-
s e n g e r i s l e s s t h a n 1 2 y e a r s o l d o r
s h o r t e r t h a n o n e m e t r e i f t y ,
- do not use the strap-guide * when a c h i l d s e a t i s i n s t a l l e d .
- n e v e r u s e t h e s a m e s e a t b e l t t o secure more than one person,
- n e v e r a l l o w a c h i l d t o t r a v e l o n y o u r l a p .
Depending on the nature and se-
riousness of the impacts , the pre-
t e n s i o n i n g d e v i c e m a y b e t r i g g e r e d
before and independently of the air
b a g s . T r i g g e r i n g o f t h e p r e - t e n s i o n e r s
is accompanied by a slight emission
of harmless smoke and a noise, due
t o t h e a c t i v a t i o n o f t h e p y r o t e c h n i c
c a r t r i d g e i n c o r p o r a t e d i n t h e s y s t e m .
In all cases, the air bag warning light
c o m e s o n .
F o l l o w i n g a n i m p a c t , h a v e t h e s e a t
belts system checked, and if neces-
s a r y r e p l a c e d , b y a P E U G E O T d e a l e r .
D o n o t i n v e r t t h e s e a t b e l t b u c k l e s a s
t h e y w i l l n o t f u l i l t h e i r r o l e f u l l y .
I f t h e s e a t s h a v e a r m r e s t s * , t h e l a p
part of the seat belt must always
p a s s u n d e r t h e a r m r e s t .
T h e s e a t b e l t s a r e i t t e d w i t h a n i n e r t i a
reel permitting automatic adjustment
o f t h e l e n g t h o f t h e s t r a p t o y o u r s i z e .
The seat belt is stored automatically
w h e n n o t i n u s e .
Before and after use, ensure that the
s e a t b e l t i s r o l l e d u p c o r r e c t l y .
The lower part of the strap must be
positioned as low as possible on the
p e l v i s .
The upper part must be positioned in
t h e h o l l o w o f t h e s h o u l d e r .
T h e i n e r t i a r e e l s a r e i t t e d w i t h a n a u -
t o m a t i c l o c k i n g d e v i c e w h i c h c o m e s
i n t o o p e r a t i o n i n t h e e v e n t o f a c o l l i -
sion, on emergency braking or if the
v e h i c l e r o l l s o v e r . Y o u c a n r e l e a s e
t h e d e v i c e b y p u l l i n g r a p i d l y o n t h e
s t r a p a n d r e l e a s i n g i t .
Page 121 of 212
CHECKS
109
Tilt the handle on the left-hand side
under the fascia to the right.
Lift the catch and raise the bonnet. Secure the strut
to hold the bonnet
open.
Before closing the
bonnet, replace the
strut in its housing.
RUNNING OUT OF FUEL
(DIESEL)
If you should run out of fuel, it is nec-
essary to re-prime the circuit.
The repriming pump, the degas
screw and the transparent pipe are
located under the bonnet (see corre-
sponding drawing):
OPENING THE BONNET
From inside
From outside
Bonnet strut
To close
Lower the bonnet and release it at
the end of its travel.
Check that the bonnet is properly
locked.
1.6 litre HDI 16V engine
- i l l t h e f u e l t a n k w i t h a t l e a s t i v e
litres of diesel,
- unclip the style cover to access the repriming pump,
- squeeze and release the manual repriming pump until fuel appears
in the transparent pipe with the
green connector,
- operate the starter until the engine starts.
2 litre HDI 16V engine
- i l l t h e f u e l t a n k w i t h a t l e a s t i v e litres of diesel,
- unclip the style cover to access the repriming pump,
- unscrew the degas screw,
- squeeze and release the manual repriming pump until diesel is
seen escaping via the degas
screw,
- retighten the degas screw,
- operate the starter until the engine starts.