2007.5 Peugeot 307 ESP
[x] Cancel search: ESPPage 24 of 212
INSTRUMENTS and CONTROLS
24
After switching on the ignition, three
functions are shown in succession:
- service indicator,
- engine oil level indicator,
- total distance recorder (total and trip distances).
Note : the total and trip distances are
displayed for 30 seconds when the
ignition is switched off, on opening
the driver’s door, as well as on lock-
ing and unlocking the vehicle.
It also displays the information relat-
ing to the cruise control or speed lim-
iter, when either of these is activated
(see corresponding section).
Service indicator
This indicates when the next service
is due in accordance with the manu-
facturer’s servicing schedule.
The point at which the next service
is due is calculated from the last indi-
cator zero reset (see corresponding
section). It is determined by two pa-
rameters:
- the distance travelled,
- the time which has elapsed since the last service.
Note: the distance remaining before
the next service may be weighted by
the time factor, depending on the us-
er’s driving habits. DISPLAY
In the event of under-revving or over-
r e v v i n g , t h e g e a r s e l e c t e d l a s h e s f o r
a few seconds, then the actual gear
engaged is displayed
This comes on when the
"SPORT" programme on
the automatic gearbox is se-
lected.
This comes on when the
"SNOW" programme on the
automatic gearbox is select-
ed.
A u t o m a t i c g e a r b o x i n d i c a t o r
l i g h t s
"SNOW" indicator light This is displayed if a gear is
not engaged correctly (selec-
tor between two positions).
"SPORT" indicator light
Invalid value during manual
operation
Page 25 of 212
INSTRUMENTS and CONTROLS
24
After switching on the ignition, three
functions are shown in succession:
- service indicator,
- engine oil level indicator,
- total distance recorder (total and trip distances).
Note : the total and trip distances are
displayed for 30 seconds when the
ignition is switched off, on opening
the driver’s door, as well as on lock-
ing and unlocking the vehicle.
It also displays the information relat-
ing to the cruise control or speed lim-
iter, when either of these is activated
(see corresponding section).
Service indicator
This indicates when the next service
is due in accordance with the manu-
facturer’s servicing schedule.
The point at which the next service
is due is calculated from the last indi-
cator zero reset (see corresponding
section). It is determined by two pa-
rameters:
- the distance travelled,
- the time which has elapsed since the last service.
Note: the distance remaining before
the next service may be weighted by
the time factor, depending on the us-
er’s driving habits. DISPLAY
In the event of under-revving or over-
r e v v i n g , t h e g e a r s e l e c t e d l a s h e s f o r
a few seconds, then the actual gear
engaged is displayed
This comes on when the
"SPORT" programme on
the automatic gearbox is se-
lected.
This comes on when the
"SNOW" programme on the
automatic gearbox is select-
ed.
A u t o m a t i c g e a r b o x i n d i c a t o r
l i g h t s
"SNOW" indicator light This is displayed if a gear is
not engaged correctly (selec-
tor between two positions).
"SPORT" indicator light
Invalid value during manual
operation
Page 38 of 212
MULTIFUNCTION DISPLAYS
37
D e i n e t h e v e h i c l e p a r a m e t e r s
O n c e t h i s m e n u h a s b e e n s e l e c t e d ,
y o u c a n a c t i v a t e o r d e a c t i v a t e t h e f o l -
lowing equipment:
- w i p e r l i n k e d w i t h r e v e r s e g e a r ( r e f e r t o t h e " V i s i b i l i t y " s e c t i o n ) ,
- "follow-me-home" lighting and d u r a t i o n ( r e f e r t o t h e " V i s i b i l i t y "
s e c t i o n ) ,
- p a r k i n g a s s i s t a n c e ( r e f e r t o t h e " D r i v i n g " s e c t i o n ) . Selection of the language
O n c e t h i s m e n u h a s b e e n s e l e c t e d ,
y o u c a n c h a n g e t h e l a n g u a g e
u s e d o n t h e d i s p l a y ( D e u t s c h ,
English, Espanol, Français, Italiano,
Nederlands, Portugues, Portugues-
B r a s i l ) .
D i s p l a y c o n i g u r a t i o n
O n c e t h i s m e n u h a s b e e n s e l e c t e d ,
y o u c a n a c c e s s t h e f o l l o w i n g s e t t i n g s :
- brightness-video setting,
- date and time setting,
- s e l e c t i o n o f t h e u n i t s .
O n c e y o u h a v e s e l e c t e d a s e t t i n g ,
press the navigator.
T u r n t h e n a v i g a t o r t o c h a n g e i t s v a l u e .
P r e s s t h e n a v i g a t o r t o r e c o r d t h e
c h a n g e a n d m o v e o n t o t h e n e x t s e t -
ting or press the
"ESC" button to
c a n c e l .
Example : "Duration of the "follow-
me-home" lighting"
F o r s a f e t y r e a s o n s , c o n i g u -
r a t i o n o f t h e m u l t i f u n c t i o n
displays by the driver must
t a k e p l a c e w h e n s t a t i o n a r y .
Page 40 of 212
MULTIFUNCTION DISPLAYS
39
"Personalisation-
Configuration" menu
O n c e t h i s m e n u h a s b e e n s e l e c t e d ,
y o u c a n g a i n a c c e s s t o t h e f o l l o w i n g
f u n c t i o n s :
- d e i n e t h e v e h i c l e p a r a m e t e r s ,
- d i s p l a y c o n i g u r a t i o n ,
- s e l e c t i o n o f t h e l a n g u a g e .
Display configuration
O n c e t h i s m e n u h a s b e e n s e l e c t e d ,
y o u c a n g a i n a c c e s s t o t h e f o l l o w i n g
settings:
- brightness-video setting,
- date and time setting,
- s e l e c t i o n o f t h e u n i t s .
Example: setting of the duration of
the "follow-me-home" lighting
Press the " " or
" "
buttons,
t h e n t h e " O K " b u t t o n t o s e l e c t t h e
menu required.
Press the " "
or
" " buttons,
then the
"OK" b u t t o n t o s e l e c t
t h e " L i g h t i n g a n d s i g n a l l i n g " l i n e .
Press the " " or
" "
buttons
t o s e t t h e v a l u e r e q u i r e d ( 1 5 , 3 0
o r 6 0 s e c o n d s ) , t h e n p r e s s t h e
"OK" b u t t o n t o c o n i r m .
For safety reasons, it is im-
p e r a t i v e t h a t c o n i g u r a t i o n o f
t h e m u l t i f u n c t i o n d i s p l a y s b y
t h e d r i v e r t a k e s p l a c e w h e n
stationary.
Define the vehicle parameters
O n c e t h i s m e n u h a s b e e n s e l e c t e d ,
y o u c a n a c t i v a t e o r d e a c t i v a t e t h e f o l -
lowing equipment:
- w i p e r l i n k e d w i t h r e v e r s e g e a r ( r e f e r t o t h e " V i s i b i l i t y " s e c t i o n ) ,
- "follow-me-home" lighting (refer t o t h e " V i s i b i l i t y " s e c t i o n ) ,
- p a r k i n g a s s i s t a n c e ( r e f e r t o t h e " D r i v i n g " s e c t i o n ) .
Press the " " or " "
buttons,
then the
"OK" b u t t o n t o s e l e c t t h e
"OK" b o x a n d c o n i r m o r p r e s s
the "ESC" b u t t o n t o c a n c e l .
Selection of the language
O n c e t h i s m e n u h a s b e e n s e l e c t e d ,
y o u c a n c h a n g e t h e l a n g u a g e u s e d
b y t h e d i s p l a y ( D e u t s c h , E n g l i s h ,
Espanol, Français, Italiano, Nederlands,
P o r t u g u e s , P o r t u g u e s - B r a s i l ) .
"Telephone" menu
With the RD4 audio equipment
s w i t c h e d o n , o n c e t h i s m e n u h a s b e e n
s e l e c t e d y o u c a n c o n i g u r e y o u r B l u e -
t o o t h h a n d s - f r e e k i t ( m a t c h i n g ) , c o n -
s u l t t h e v a r i o u s t e l e p h o n e d i r e c t o r i e s
( c a l l s l o g , s e r v i c e s , . . . ) a n d m a n a g e
y o u r c o m m u n i c a t i o n s ( p i c k u p , h a n g
u p , c a l l w a i t i n g , s e c r e t m o d e , . . . ) .
F o r f u r t h e r d e t a i l s c o n c e r n i n g t h e
" T e l e p h o n e " a p p l i c a t i o n , r e f e r t o t h e
RD4 part of the "Audio and Telemat-
i c s " s e c t i o n .
Page 49 of 212
COMFORT
48
The air conditioning only operates
when the engine is running. When the engine is cold, to prevent
too great a distribution of cold air, the
a i r l o w w i l l r e a c h i t s o p t i m u m l e v e l
gradually.
The driver and his front
passenger can each adjust
the temperature to their re-
quirements.
The value indicated on the
display corresponds to a level of
comfort and not to a temperature in
degrees Celsius or Fahrenheit.
Turn control 2 or 3 to the left or to
the right respectively to decrease or
increase this value.
A setting around the v a l u e 2 1 provides
optimum comfort. However, depend-
ing on your requirements, a setting be-
tween 18 and 24 is normal. For optimum comfort, you are ad-
vised to avoid a left/right setting dif-
ference of more than 3.
For maximum cooling or heating of the
passenger compartment, it is possible
to go below the value 15 by turning un-
til
"LO" is displayed or above the value
27 by turning until "HI" is displayed.
4 . A u t o m a t i c v i s i b i l i t y p r o g r a m m e The automatic comfort pro-
gramme may not be suf-
i c i e n t t o q u i c k l y d e m i s t o r
de-ice the windscreen and
side windows (humidity,
several passengers, ice, etc.).
In this case, select the automatic vis-
ibility programme.
The system automatically controls
t h e a i r c o n d i t i o n i n g , t h e a i r l o w a n d
the air intake and provides optimum
distribution of the ventilation to the
windscreen and side windows.
To switch it off, press button 4 again
or press the "AUTO" button, the
button"s indicator light switches off
and "AUTO" is displayed.
A u t o m a t i c o p e r a t i o n
1 . A u t o m a t i c c o m f o r t p r o g r a m m e
Press the "AUTO" button.
The "AUTO" symbol is dis-
played.
We recommend the use of
this mode: it permits auto-
matic and optimised adjustment of
all of the functions, passenger com-
p a r t m e n t t e m p e r a t u r e , a i r l o w , a i r
distribution and air recirculation, in
accordance with the comfort value
that you have chosen. This system is
designed to operate effectively in all
seasons, with the windows closed.
2 . D r i v e r ' s s i d e a d j u s t m e n t
3 . P a s s e n g e r s i d e a d j u s t m e n t On entering the vehicle, if
the interior temperature is
much colder or warmer than
the comfort value, there is no
need to change the value displayed
in order to obtain the comfort re-
quired. The system corrects the dif-
ference in temperature automatically
and as quickly as possible.
DUAL ZONE AUTOMATIC AIR CONDITIONING
Page 50 of 212
49
COMFORT
M a n u a l o p e r a t i o n
If you wish, you can make a different
choice from that offered by the sys-
tem by changing a setting. The other
functions will still be controlled auto-
matically. Pressing the "AUTO" but-
ton returns the system to completely
automatic operation.
Press this button to stop air
cooling.
Avoid prolonged use of this
mode (risk of condensation,
odour, humidity).
Press this button again as soon as
possible to return to automatic op-
eration of the air conditioning. The
symbol "A/C" is displayed.
6 . A i r d i s t r i b u t i o n a d j u s t m e n t Pressing this button sev-
eral times in succession
e n a b l e s t h e a i r l o w t o b e
directed in turn towards:
- the windscreen and side windows (de-icing or demisting),
- the windscreen, the side windows and the footwells,
- the footwells,
- the centre vents, the side vents and the footwells,
- the centre and side vents. 7 . A i r l o w a d j u s t m e n t
Press the
" s m a l l f a n " or " l a r g e f a n "
button respectively to decrease or in-
c r e a s e t h e l o w o f a i r .
T h e a i r l o w s y m b o l , t h e f a n , i l l s p r o -
gressively in relation to the value re-
quired.
8 . A i r i n t a k e / A i r r e c i r c u l a t i o n 9 . D e m i s t i n g t h e r e a r s c r e e n a n d
t h e m i r r o r s
Press this button for recir-
culation of the interior air.
The air recirculation symbol
8 is displayed.
Air recirculation enables the
passenger compartment to be isolat-
ed from exterior odours and smoke.
Avoid prolonged recirculation of inte-
rior air (risk of condensation and de-
terioration of the air quality).
As soon as possible, press this but-
ton again to permit the intake of out-
side air and prevent condensation.
5 . A i r c o n d i t i o n i n g O n / O f f
Press this button to demist
the rear screen and the ex-
terior mirrors. The button
9
indicator light comes on.
Demisting switches off au-
tomatically to prevent an excessive
consumption of current. It is possible
to stop operation of the demisting be-
fore it is switched off automatically by
pressing the button again.
1 0 . S w i t c h i n g t h e s y s t e m o f f
Press the " s m a l l f a n " button of the
a i r l o w 7 until the fan symbol disap-
pears.
This action switches off all of the
functions of the air conditioning sys-
tem, with the exception of the demist-
ing of the rear screen 9 .
Temperature related comfort is no
l o n g e r g u a r a n t e e d b u t a s l i g h t l o w o f
air, due to the movement of the ve-
hicle, can still be felt.
Pressing the " l a r g e f a n " button of
t h e a i r l o w 7 again or the AUTO but-
ton reactivates the system with the
values set before it was switched off.
Page 52 of 212
51
COMFORT
E l e c t r i c e x t e r i o r m i r r o r s
A d j u s t m e n t
Slide switch A to the right or to
the left to select the correspond-
ing mirror.
Move knob B in all four directions
to adjust.
Return switch A to the centre po-
sition.
F o l d i n g
- from inside:
with the ignition on, pull switch
A rearwards.
- from outside:
lock the vehicle using the re-
mote control or the key.
Note: if the mirrors are folded using
switch A , they will not unfold when
the vehicle is unlocked using the
remote control or the key. Switch A
must be pulled again.
U n f o l d i n g
- from inside:
with the ignition on, pull switch
A rearwards.
- from outside:
unlock the vehicle using the re-
mote control or the key.
The folding and unfolding of
the exterior mirrors can be
deactivated by a PEUGEOT
dealer.
MIRRORS
Move the lever in all four directions
to adjust.
When the vehicle is parked, the ex-
terior mirrors can be folded back
manually.
The exterior mirror on the
driver"s side is convex (out-
e r e d g e d e i n e d b y a d o t t e d
line) in order to eliminate the
"blind spot".
As a result, objects observed in the
driver"s and passenger"s mirrors are
in reality closer than they appear.
This must be taken into account to
correctly judge the distance of vehi-
cles approaching from behind.
M a n u a l e x t e r i o r m i r r o r s
Page 73 of 212
ACCESS
67
1. Driver’s electric window
switch.
2. Passenger’s electric window
switch.
3. Rear right electric window
switch.
4. Rear left electric window
switch.
5. Disarming of the rear electric
window switches (child lock) .
You have two options: Automatic operation:
Press or pull the switch fully : the
window opens or closes completely
when the switch is released. Press-
ing the switch again stops the move-
ment of the window.
Note: approximately 45 seconds fol-
lowing removal of the ignition key,
none of the windows can be opened
or closed. The ignition must be
switched on again to open or close
the windows.
Always remove the key from
the ignition when leaving
the vehicle, even for a short
time.
In the event of contact during opera-
tion of the windows, you must reverse
the movement of the window. To do
this, press the switch concerned.
When the driver operates the pas-
senger electric window switches, he
must ensure that no one is prevent-
ing correct closing of the windows.
The driver must ensure that the pas-
sengers use the electric windows
correctly.
Be aware of children when operating
the windows.
Reinitialisation of the
windows
Following reconnection of the battery
or in the event of a malfunction:
- release the switch and pull it again until it closes completely,
- hold the switch for approximately one second after closing,
- press the switch to lower the win- dow automatically,
- when the window has reached the low position, press the switch again
for approximately one second.
The safety auto-reverse function is
not active during these operations.
Manual operation:
Press or pull the switch gently.
The window stops as soon as the
switch is released.
ELECTRIC WINDOWS
Safety auto-reverse
When the window rises and meets
an obstacle, it stops and partially
lowers again.
Disarming the rear window
controls
For the safety of your children, press
switch 5 to prevent operation of the
rear windows irrespective of their
position.
When the button is pressed down,
disarming is active. When the button
is raised, disarming is deactivated.
Note:
In the event of unwanted opening
of the window on closing (for exam-
ple in the presence of frost), press
the switch until it opens completely,
then pull it immediately until it clos-
es. Continue to hold the switch for
approximately one second after the
window has closed.
The safety auto-reverse function is
not active during these operations.