2007.5 Peugeot 307 tow

47
COMFORT
6. Demisting the rear screen and the mirrors
Pressing the button once
demists the rear screen
and the exterior mirrors.
This switches off automati-
cally to prevent an exces-
sive consumption of current.
Pressing again reactivates demisting.
It is possible to stop demisting be-
fore it is switched off automatically by
pressing the button again. In certain cases of particu-
larly arduous use (towing the
maximum load on a steep
gradient in high tempera-
tures), switching off the air condition-
ing permits the recovery of engine
power and therefore an increase in
the towing capacity.
In order for the air conditioning to be
fully effective, the windows must be
closed.
The air conditioning system does not
contain chlorine and does not pres-
ent any danger to the ozone layer.
Operate the air conditioning system
for 5 to 10 minutes, once or twice a
month, to keep it in perfect working
order.
The water produced by the air con-
ditioning condensation is discharged
through an opening provided for this
purpose. Therefore, a puddle of wa-
ter may form underneath the vehicle
when stationary.
In order to ensure that the air condi-
tioning system operates correctly, reg-
ular checks are also recommended.
If the system does not produce cold air,
do not use it and contact a PEUGEOT
dealer.
5. Air intake/Air recirculation
Pressing button 5 permits
recirculation of the interior
air. This is indicated by il-
lumination of the indicator
light.
As soon as possible, press button

5 again to permit the intake of out-
side air, to prevent deterioration of
the air quality and to avoid misting of
the windows. This is indicated by the
switching off of the indicator light.
The interior air recirculation enables
you to isolate the passenger com-
partment from exterior odours and
smoke.
The outside air intake enables you to
prevent and eliminate misting of the
windscreen and side windows.
Used simultaneously with the air con-
ditioning, air recirculation enables
performance to be improved.
Used in a humid climate, air recir-
culation may result in misting of the
windows.
Rapid demisting of the wind-
screen
To quickly de-ice or demist the wind-
screen and side windows:
- place the air distribution control in the "windscreen and side win-
dows" position,
- place the temperature 2 and air
l ow 3 controls at maximum, as
indicated by the "Windscreen
and side windows" symbol on the
control panel,
- close the centre vents,
- switch air intake button 5 to the
"Outside Air Intake" position (but-
ton 5 indicator light off),
- start the air conditioning by press- ing button 1 .

49
COMFORT
Manual operation
If you wish, you can make a different
choice from that offered by the sys-
tem by changing a setting. The other
functions will still be controlled auto-
matically. Pressing the "AUTO" but-
ton returns the system to completely
automatic operation.
Press this button to stop air
cooling.
Avoid prolonged use of this
mode (risk of condensation,
odour, humidity).
Press this button again as soon as
possible to return to automatic op-
eration of the air conditioning. The
symbol "A/C" is displayed.
6. Air distribution adjustment Pressing this button sev-
eral times in succession
enables the air l ow to be
directed in turn towards:
- the windscreen and side windows (de-icing or demisting),
- the windscreen, the side windows and the footwells,
- the footwells,
- the centre vents, the side vents and the footwells,
- the centre and side vents. 7. Air l ow adjustment
Press the
"small fan" or "large fan"
button respectively to decrease or in-
crease the l ow of air.
The air l ow symbol, the fan, i lls pro-
gressively in relation to the value re-
quired.
8. Air intake/Air recirculation 9. Demisting the rear screen and
the mirrors
Press this button for recir-
culation of the interior air.
The air recirculation symbol

8 is displayed.
Air recirculation enables the
passenger compartment to be isolat-
ed from exterior odours and smoke.
Avoid prolonged recirculation of inte-
rior air (risk of condensation and de-
terioration of the air quality).
As soon as possible, press this but-
ton again to permit the intake of out-
side air and prevent condensation.
5. Air conditioning On/Off
Press this button to demist
the rear screen and the ex-
terior mirrors. The button
9
indicator light comes on.
Demisting switches off au-
tomatically to prevent an excessive
consumption of current. It is possible
to stop operation of the demisting be-
fore it is switched off automatically by
pressing the button again.

10. Switching the system off
Press the "small fan" button of the
air l ow 7 until the fan symbol disap-
pears.
This action switches off all of the
functions of the air conditioning sys-
tem, with the exception of the demist-
ing of the rear screen 9 .
Temperature related comfort is no
longer guaranteed but a slight l ow of
air, due to the movement of the ve-
hicle, can still be felt.
Pressing the "large fan" button of
the air l ow 7 again or the AUTO but-
ton reactivates the system with the
values set before it was switched off.

COMFORT
50
In certain cases of particu-
larly arduous use (towing the
maximum load on a steep
gradient in high tempera-
tures), switching off the air condition-
ing permits the recovery of engine
power and therefore an increase in
the towing capacity.
In order for the air conditioning to be
fully effective, the windows must be
closed.
The air conditioning system does not
contain chlorine and does not pres-
ent any danger to the ozone layer.
Operate the air conditioning for 5 to
10 minutes, once or twice a month, to
keep it in good working order.
The water produced by the air con-
ditioning condensation is discharged
through an opening provided for this
purpose. Therefore, a puddle of wa-
ter may form underneath the vehicle
when stationary.
In order to ensure that the air condi-
tioning system operates correctly, reg-
ular checks are also recommended.
If the system does not produce cold air,
do not use it and contact a PEUGEOT
dealer.

53
COMFORT
FRONT SEATS
1. Forwards-backwards adjustment
Lift the control and slide the seat for-
wards or backwards.
2. Driver's or passenger's seat height adjustment
Pull the handle upwards or push it
downwards as many times as neces-
sary to obtain the required position.
3. Seat back angle adjustment
Push the handle towards the rear.
4. Access to rear seats (3 door)
Pull the handle to fold the seat back
and move the seat forwards.
On repositioning, the seat returns to
its initial position.

Note: you can also use control 3 .
Then adjust the angle.
No person or object must pre-
vent the seat slide from re-
turning to its initial position; a
return to this position is nec-
essary for the seat to lock in place.

VISIBILITY
Front and rear lights (ring A)

 Place ring A in the required
position. Dipped/Main beam change

 Pull the stalk towards you.
Vehicles i tted with front fog lamps
and a rear fog lamp (ring C)
Lights off
Side lights Dipped/main beam
headlamps Rear fog lamp Front fog lamps ( i rst rotation
of the ring forwards)
Front and rear fog
lamps (2
nd rotation of
the ring forwards).

Note: to switch off
the rear fog lamp
and the front fog lamps, turn the ring
backwards twice in succession.
Vehicles i tted with a rear fog
lamp (ring B)
This operates with the dipped/main
beam headlamps.

Note: when the lights are switched off
automatically, the rear fog lamp and
the dipped headlamps will remain on.
Turn the ring backwards to switch
off the rear fog lamp. The dipped
headlamps will then be switched off. The front fog lamps operate with
the side lights and the dipped
headlamps.
Front fog lamps and rear fog
lamp

 Turn ring B or C forwards to switch
on and backwards to switch off.
The status is coni rmed by the
indicator light on the instrument
panel .
Lights on buzzer
With the ignition off and the automatic
switching on of the lights deactivated,
when the driver’s door is opened, a
buzzer sounds to warn you that you
have left your lights on.
The rear fog lamp will be
deactivated automatically
when towing or when a
bicycle carrier i tted with a
fog lamp is i tted.
LIGHTS STALK
In good or rainy weather,
both day and night, the front
fog lamps and the rear fog
lamp are dazzling and are
prohibited.
Do not forget to switch them off when
they are no longer needed.
Automatic switching
on of the lights

VISIBILITY
76
Special position of the front
windscreen wiper
In the minute following switching off
of the ignition, any action on the stalk
positions the wipers in the centre of
the windscreen.
This action enables you to position
the wiper blades for winter parking,
cleaning or replacement (See section
"Practical information - Changing a
wiper blade").
To park the wipers after this has
been done, switch on the ignition and
operate the stalk.
Windscreen and headlamp wash
Pull the windscreen wiper stalk
towards you. The windscreen wash
then the windscreen wipers operate
for a i xed period.
The headlamp wash is also activated,

if the headlamps are on. WINDSCREEN WIPER STALK

2 Fast wipe (heavy rain).

1
Normal wipe (moderate rain).

I Intermittent wipe.

0 Off.

AUTO
 Automatic or single wipe
(press downwards).
In the I ntermittent position, the wiping
speed is in proportion to the speed of
the vehicle.
In AUTO mode, the wiping speed is
in proportion to the intensity of the
rainfall. The i rst press of the stalk
downwards activates the automatic
wipe.
Subsequent presses trigger a single
wipe. Front windscreen wiper with
intermittent wipe

2 Fast wipe (heavy rain).

1 Normal wipe (moderate rain).

I Intermittent wipe.

0 Off.

 Single wipe (press downwards).
In the I ntermittent position, the wiping
speed is in proportion to the vehicle
speed.
Front windscreen wiper with
automatic wipe

LAYOUT
85

1. Rear parcel shelf
To remove the shelf:
- unhook the two strings,
- slightly raise the shelf, then remove it.
The shelf can be stored:
- either behind the front seats,
- or behind the rear seat.

2. Hooks

3. Stowing rings
4. Luggage retaining net
Hooked onto the stowing rings, this
enables your luggage to be secured.

5. Open storage trays

6. 12 volt socket (100 W max)
This is a lighter type socket, installed
on the left-hand side of the parcel
shelf.
It is supplied from the "Running"
position.
BOOT LAYOUT (SALOON)

LAYOUT
87
BOOT LAYOUT (ESTATE)
4. Boot l oor and pillar stowing rings
5. Rear seat stowing rings
6. Luggage retaining net
Secure the net hooks in the stowing
rings on the l oor or on the folded
rear seat (two horizontal positions) or
secure the net hooks in the stowing
rings on the boot pillars and in the
l oor rings at the rear of the boot (one
vertical position).
7. 12 volt socket (100 W max)
This is a lighter type socket, installed
on the load space cover left support.
It is supplied from the "Running"
position. 8. High load retaining net i xings
The high load retaining net can be
installed behind the front or rear
seats.
Open the covers of the corresponding
upper i xings.
Fit the ends of the metal bar in these
i xings.
To install the high load retaining net:
- behind the front seats, lift the rear
seat cushion, hook the net straps
on the i xings then fold the rear
seat;
- behind the rear seat, hook the net straps in the stowing rings on the
l oor.
The rings are located directly below
the corresponding upper i xings.
Pull the two straps taut.
9. Grab handles and coat hooks
1. Load space cover
To install it:
- position the front ends of the
cover on its support and press
gently to put it in place,
- unfold the cover fully,
- position the rear ends of the cover on its support and press gently to
put it in place.
To remove it:
- unclip the rear ends,
- fold the cover fully,
- unclip the front ends and remove the cover.
To store it, slide it under the rear
seats (location A ).
2. Floor storage trays (2/3 - 1/3)
3. Storage nets
One of them contains the luggage
retaining net.