2007.5 Peugeot 307 sensor
[x] Cancel search: sensorPage 82 of 212
VISIBILITY
74
A u t o m a t i c s w i t c h i n g o n o f t h e
lights
Side lights and dipped beam
headlamps switch on automatically if
the light is poor, or during operation of
the windscreen wipers. They switch
off as soon as the light becomes
bright enough or the windscreen
wipers stop.
Note: in foggy weather or in snow,
the brightness sensor can detect
s u f i c i e n t l i g h t . A s a c o n s e q u e n c e , t h e
lights will not come on automatically.
Deactivation
Turn ring A to a position other
than "AUTO" . Switching off is
accompanied by a message on
the multifunction display.
I f t h e b r i g h t n e s s s e n s o r d o e s n o t
f u n c t i o n c o r r e c t l y , the lights come
on accompanied by the service
warning light, an audible signal and
a message on the multifunction
display.
Contact a PEUGEOT dealer.
M a n u a l " F o l l o w - m e - h o m e "
lighting
W h e n t h e a u t o m a t i c s w i t c h i n g o n
o f t h e l i g h t s f u n c t i o n i s d e a c t i v a t e d ,
the side lights and dipped headlamps
remain on for the duration selected
for the automatic "follow-me-home"
lighting.
I f t h e v e h i c l e i s n o t i t t e d w i t h t h e
a u t o m a t i c s w i t c h i n g o n o f t h e l i g h t s
f u n c t i o n , when you leave your vehicle,
the side lights and dipped headlamps
remain on for thirty seconds.
D i r e c t i o n i n d i c a t o r s ( l a s h e r s )
L e f t : downwards.
Right: upwards.
Note: if you forget to cancel the
direction indicator, the volume of the
audible signal will increase, if you
are driving at a speed greater than
50 mph (80 km/h).
A u t o m a t i c " F o l l o w m e h o m e "
lighting
With the ignition off, when you leave
your vehicle with the automatic
s w i t c h i n g o n o f t h e l i g h t s f u n c t i o n
activated , the side lights and dipped
headlamps remain on for the selected
duration. Activation:
switch off the engine,
" l a s h " t h e h e a d l a m p s ,
get out of the vehicle and lock it.
Deactivation:
" l a s h " t h e h e a d l a m p s a g a i n ,
get out of the vehicle and lock it.
To deactivate or activate this
function, go to the multifunction
d i s p l a y c o n i g u r a t i o n m e n u .
The duration of the timed
period must also be set (15,
30, 60 seconds), via the multifunction
d i s p l a y c o n i g u r a t i o n m e n u , e x c e p t i n
the case of the monochrome screen
A for which it is pre-set.
C a n c e l l i n g :
" l a s h " t h e h e a d l a m p s ,
get out of the vehicle and lock it. Activation
Turn ring A to the "AUTO"
position. The automatic lighting
is accompanied by a message on
the multifunction display.
Do not cover the brightness
sensor, coupled with the rain
sensor, located in the centre
of the windscreen, behind
the interior mirror. It is used for the
automatic switching on of the lights.
Page 83 of 212
VISIBILITY
74
A u t o m a t i c s w i t c h i n g o n o f t h e
lights
Side lights and dipped beam
headlamps switch on automatically if
the light is poor, or during operation of
the windscreen wipers. They switch
off as soon as the light becomes
bright enough or the windscreen
wipers stop.
Note: in foggy weather or in snow,
the brightness sensor can detect
s u f i c i e n t l i g h t . A s a c o n s e q u e n c e , t h e
lights will not come on automatically.
Deactivation
Turn ring A to a position other
than "AUTO" . Switching off is
accompanied by a message on
the multifunction display.
I f t h e b r i g h t n e s s s e n s o r d o e s n o t
f u n c t i o n c o r r e c t l y , the lights come
on accompanied by the service
warning light, an audible signal and
a message on the multifunction
display.
Contact a PEUGEOT dealer.
M a n u a l " F o l l o w - m e - h o m e "
lighting
W h e n t h e a u t o m a t i c s w i t c h i n g o n
o f t h e l i g h t s f u n c t i o n i s d e a c t i v a t e d ,
the side lights and dipped headlamps
remain on for the duration selected
for the automatic "follow-me-home"
lighting.
I f t h e v e h i c l e i s n o t i t t e d w i t h t h e
a u t o m a t i c s w i t c h i n g o n o f t h e l i g h t s
f u n c t i o n , when you leave your vehicle,
the side lights and dipped headlamps
remain on for thirty seconds.
D i r e c t i o n i n d i c a t o r s ( l a s h e r s )
L e f t : downwards.
Right: upwards.
Note: if you forget to cancel the
direction indicator, the volume of the
audible signal will increase, if you
are driving at a speed greater than
50 mph (80 km/h).
A u t o m a t i c " F o l l o w m e h o m e "
lighting
With the ignition off, when you leave
your vehicle with the automatic
s w i t c h i n g o n o f t h e l i g h t s f u n c t i o n
activated , the side lights and dipped
headlamps remain on for the selected
duration. Activation:
switch off the engine,
" l a s h " t h e h e a d l a m p s ,
get out of the vehicle and lock it.
Deactivation:
" l a s h " t h e h e a d l a m p s a g a i n ,
get out of the vehicle and lock it.
To deactivate or activate this
function, go to the multifunction
d i s p l a y c o n i g u r a t i o n m e n u .
The duration of the timed
period must also be set (15,
30, 60 seconds), via the multifunction
d i s p l a y c o n i g u r a t i o n m e n u , e x c e p t i n
the case of the monochrome screen
A for which it is pre-set.
C a n c e l l i n g :
" l a s h " t h e h e a d l a m p s ,
get out of the vehicle and lock it. Activation
Turn ring A to the "AUTO"
position. The automatic lighting
is accompanied by a message on
the multifunction display.
Do not cover the brightness
sensor, coupled with the rain
sensor, located in the centre
of the windscreen, behind
the interior mirror. It is used for the
automatic switching on of the lights.
Page 86 of 212
VISIBILITY
77
A u t o m a t i c w i n d s c r e e n w i p e r s
In AUTO mode, the windscreen
wipers operate automatically and
a d a p t t h e i r s p e e d t o t h e i n t e n s i t y
o f t h e r a i n f a l l . Do not cover the rain sensor
located on the windscreen
behind the interior mirror.
When using an automatic car
wash, switch off the ignition.
In winter, it is advisable to wait for the
windscreen to completely clear of ice
before operating the automatic wipe.
Activation
Activation of the function is accom-
panied by a message on the multi-
function display.
R e a r w i n d s c r e e n w i p e r
To activate or deactivate
this function, go to the multi-
f u n c t i o n d i s p l a y c o n i g u r a t i o n
menu.
I f t h e r e i s a s i g n i i c a n t
accumulation of snow or ice and
when using a bicycle carrier on the
tailgate (estate), deactivate the
automatic rear wiper by going to the
m u l t i f u n c t i o n d i s p l a y c o n i g u r a t i o n
menu.
R e a r w i n d s c r e e n w a s h
Deactivation
Deactivation of the function is
accompanied by a message on the
multifunction display.
The function is deactivated when the
windscreen wipers stalk is moved to
position I , 1 or 2 .
I n t h e e v e n t o f
m a l f u n c t i o n of the
automatic windscreen wipers, the
windscreen wipers will operate in
intermittent mode.
Contact a PEUGEOT dealer to have
the system checked. Turn ring
A p a s t t h e i r s t
notch; the windscreen wash
then the windscreen wiper
o p e r a t e f o r a i x e d p e r i o d .
Turn ring
A t o t h e i r s t n o t c h
for intermittent wiping.
When reverse gear is
engaged, if the windscreen
wipers are in operation, the
rear wiper starts.
T h e a u t o m a t i c w i n d s c r e e n
w i p e r s f u n c t i o n m u s t b e
r e a c t i v a t e d i f t h e i g n i t i o n
h a s b e e n s w i t c h e d o f f f o r
m o r e t h a n o n e m i n u t e , b y p r e s s i n g
t h e s t a l k d o w n w a r d s .
Page 87 of 212
VISIBILITY
77
A u t o m a t i c w i n d s c r e e n w i p e r s
In AUTO mode, the windscreen
wipers operate automatically and
a d a p t t h e i r s p e e d t o t h e i n t e n s i t y
o f t h e r a i n f a l l . Do not cover the rain sensor
located on the windscreen
behind the interior mirror.
When using an automatic car
wash, switch off the ignition.
In winter, it is advisable to wait for the
windscreen to completely clear of ice
before operating the automatic wipe.
Activation
Activation of the function is accom-
panied by a message on the multi-
function display.
R e a r w i n d s c r e e n w i p e r
To activate or deactivate
this function, go to the multi-
f u n c t i o n d i s p l a y c o n i g u r a t i o n
menu.
I f t h e r e i s a s i g n i i c a n t
accumulation of snow or ice and
when using a bicycle carrier on the
tailgate (estate), deactivate the
automatic rear wiper by going to the
m u l t i f u n c t i o n d i s p l a y c o n i g u r a t i o n
menu.
R e a r w i n d s c r e e n w a s h
Deactivation
Deactivation of the function is
accompanied by a message on the
multifunction display.
The function is deactivated when the
windscreen wipers stalk is moved to
position I , 1 or 2 .
I n t h e e v e n t o f
m a l f u n c t i o n of the
automatic windscreen wipers, the
windscreen wipers will operate in
intermittent mode.
Contact a PEUGEOT dealer to have
the system checked. Turn ring
A p a s t t h e i r s t
notch; the windscreen wash
then the windscreen wiper
o p e r a t e f o r a i x e d p e r i o d .
Turn ring
A t o t h e i r s t n o t c h
for intermittent wiping.
When reverse gear is
engaged, if the windscreen
wipers are in operation, the
rear wiper starts.
T h e a u t o m a t i c w i n d s c r e e n
w i p e r s f u n c t i o n m u s t b e
r e a c t i v a t e d i f t h e i g n i t i o n
h a s b e e n s w i t c h e d o f f f o r
m o r e t h a n o n e m i n u t e , b y p r e s s i n g
t h e s t a l k d o w n w a r d s .
Page 99 of 212
SAFETY
89
S e n s o r s i t t e d i n e a c h v a l v e c h e c k
t h e t y r e p r e s s u r e d u r i n g d r i v i n g a n d
t r i g g e r a w a r n i n g i n t h e e v e n t o f
m a l f u n c t i o n ( s p e e d a b o v e 1 2 m p h
( 2 0 k m / h ) ) . T h e s e r v i c e w a r n i n g l i g h t
comes on on the instrument
panel, accompanied by an
audible signal and a mes-
sage on the multifunction
display locating the wheel
c o n c e r n e d .
Check the tyre pressures as soon as
p o s s i b l e . T h i s c h e c k m u s t b e c a r r i e d
o u t w h e n t h e t y r e s a r e c o l d . Puncture
The
STOP warning light comes on on
the instrument panel, accompanied
by an audible signal and a message
on the multi-function display locating
t h e w h e e l c o n c e r n e d .
S t o p i m m e d i a t e l y , a v o i d i n g a n y s u d -
d e n m o v e m e n t o f t h e s t e e r i n g w h e e l
a n d t h e b r a k e s .
Change the damaged wheel (punc-
t u r e d o r v e r y d e l a t e d t y r e ) , a n d h a v e
the tyre pressure checked as soon
a s p o s s i b l e .
T h e s e r v i c e w a r n i n g l i g h t
comes on on the instrument
panel, accompanied by an
audible signal and a mes-
sage on the multifunction
display locating the wheel or wheels
which are not detected or indicating a
f a u l t i n t h e s y s t e m .
Contact a PEUGEOT dealer to re-
p l a c e t h e f a u l t y s e n s o r ( s ) . All repairs and changing of
t y r e s o n a w h e e l i t t e d w i t h
this system must be carried
o u t b y a P E U G E O T d e a l e r .
If, when changing a tyre, you install
a wheel which is not detected by
y o u r v e h i c l e ( e x a m p l e : i t t i n g o f s n o w
t y r e s ) , y o u m u s t h a v e t h e s y s t e m
r e i n i t i a l i s e d b y a P E U G E O T d e a l e r .
T h e t y r e u n d e r - i n l a t i o n d e t e c t i o n
s y s t e m i s a n a i d t o d r i v i n g w h i c h d o e s
n o t r e p l a c e t h e n e e d f o r t h e d r i v e r t o
b e v i g i l a n t o r t o d r i v e r e s p o n s i b l y .
This system does not eliminate
t h e n e e d t o h a v e t h e t y r e p r e s s u r e
checked regularly (see manufactur-
e r ’ s l a b e l o n t h e d o o r p i l l a r ) t o e n s u r e
that the optimum dynamic perform-
a n c e o f t h e v e h i c l e i s m a i n t a i n e d a n d
p r e v e n t p r e m a t u r e w e a r o f t h e t y r e s ,
p a r t i c u l a r l y i n a r d u o u s d r i v i n g c o n d i -
t i o n s ( h e a v y l o a d , h i g h s p e e d ) .
The tyre pressures must be checked
c o l d , a t l e a s t o n c e a m o n t h . R e -
member to check the pressure of the
s p a r e w h e e l .
T h e t y r e u n d e r - i n l a t i o n d e t e c t i o n
s y s t e m m a y e x p e r i e n c e t e m p o r a r y
interference due to radioelectric
emissions on a frequency close to
t h a t u s e d b y t h e s y s t e m .
Flat tyre
Sensor(s) not detected or faulty
Notes:
This message is also displayed when
one of the wheels is away from the
v e h i c l e ( b e i n g r e p a i r e d ) o r w h e n o n e
or more wheels without a sensor are
i t t e d .
T h e s p a r e w h e e l i s n o t i t t e d w i t h a
s e n s o r .
TYRE UNDER-INFLATION DETECTION
Page 120 of 212
DRIVING
107
VISUAL AND AUDIBLE REAR
PARKING ASSISTANCE
This system consists of four proximity
sensors, located in the rear bumper.
This detects any obstacle (person,
vehicle, tree, gate, etc.) behind the
vehicle. Nevertheless, it cannot
detect obstacles located just below
the bumper.
An object, such as a stake, a
roadworks cone or any other similar
object may be detected at the
beginning of the manoeuvre, but
may no longer be detected when the
vehicle comes close to it.
Note: this function will be disarmed
automatically when the vehicle is
towing a trailer or when a bicycle
c a r r i e r i s i t t e d ( v e h i c l e i t t e d w i t h
towing attachment or bicycle carrier
recommended by PEUGEOT).
In bad or wintry weather, ensure that
the sensors are not covered with
mud, frost or snow. When reverse
gear is engaged, an audible signal
(long bleep) indicates that the
sensors may be dirty. The proximity information is given
by:
- an audible signal, which becomes
more rapid as the vehicle
approaches the obstacle,
- a graphic on the multifunction display, with blocks which become
progressively closer to the vehicle.
Depending on the multifunction
display, the audible signal is
transmitted by a buzzer or by the rear
speakers which transmit:
- on the right if an obstacle is detected on the right,
- on the left if an obstacle is detected on the left,
- on the right and on the left if an obstacle is detected in the centre.
When the distance between the
rear of the vehicle and the obstacle
is less than approximately thirty
centimetres, the audible signal
becomes continuous and the
"Danger" symbol appears depending
on the multifunction display.
Change to neutral, the system is
again inactive.
If there is an operating
fault, when reverse gear is
engaged, the service warning
light comes on, accompanied
by an audible signal (short bleep)
and a message on the multifunction
display.
Contact a PEUGEOT dealer.
Activation/Deactivation
Activation
The system is activated as soon as
reverse gear is engaged.
This is accompanied by an audible
signal and displaying of the vehicle,
depending on the multifunction
display. The system can be activated
or deactivated from the
multifunction display
c o n i g u r a t i o n m e n u .
The activation and deacti-
vation of the system are memorised
when the engine is switched off.
Switching the system off
Page 142 of 212
10PRACTICAL INFORMATION
128
C h a n g i n g a f u s e
Before changing a fuse, you must
establish the cause of the fault and
have it corrected. The fuse numbers
are indicated on the fuse box.
Always change a faulty fuse for one
of the same rating (same colour).
Use the special pliers located on the
inside of the fascia fuse box cover,
this support also contains the spare
fuses.
F a s c i a p a n e l f u s e s
Fuse No. Rating Functions
F1 15 A Rear wiper.
F2 30 A Locking and deadlocking.
F3 5 A Air bags and pre-tensioners unit.
F4 10 A Brake (STOP) and clutch pedal switches, engine
coolant level switch, steering wheel angle sensor,
ESP dual-function sensor, particle emission
i l t e r p u m p , d i a g n o s t i c s o c k e t , e l e c t r o c h r o m a t i c
mirror.
F5 30 A Front electric windows, sunroof, heated mirrors.
C H A N G I N G A F U S E
The fuse boxes are located in the
lower part of the fascia (passenger
side) and in the engine compartment
(left-hand side).
Correct Incorrect
Open the glove box lid to gain
access to the fuses.
Page 143 of 212
10PRACTICAL INFORMATION
128
C h a n g i n g a f u s e
Before changing a fuse, you must
establish the cause of the fault and
have it corrected. The fuse numbers
are indicated on the fuse box.
Always change a faulty fuse for one
of the same rating (same colour).
Use the special pliers located on the
inside of the fascia fuse box cover,
this support also contains the spare
fuses.
F a s c i a p a n e l f u s e s
Fuse No. Rating Functions
F1 15 A Rear wiper.
F2 30 A Locking and deadlocking.
F3 5 A Air bags and pre-tensioners unit.
F4 10 A Brake (STOP) and clutch pedal switches, engine
coolant level switch, steering wheel angle sensor,
ESP dual-function sensor, particle emission
i l t e r p u m p , d i a g n o s t i c s o c k e t , e l e c t r o c h r o m a t i c
mirror.
F5 30 A Front electric windows, sunroof, heated mirrors.
C H A N G I N G A F U S E
The fuse boxes are located in the
lower part of the fascia (passenger
side) and in the engine compartment
(left-hand side).
Correct Incorrect
Open the glove box lid to gain
access to the fuses.