Page 140 of 223
i
i
128
Fixing the steel or "space-
saving" type spare wheel
I f y o u r v e h i c l e i s i t t e d w i t h a l -
loy wheels, it is normal to notice,
w h e n t i g h t e n i n g t h e b o l t s o n i t t i n g ,
that the washers do not come into
contact with the steel or "space-
saving" type spare wheel. The
wheel is secured by the conical
contact of each bolt.
Access to the spare wheel
(Saloon)
The spare wheel is installed in the boot
u n d e r t h e l o o r .
According to model, the spare wheel may
be steel or of the "space saving" type.
To gain access to it, refer to the para-
graph "Access to the tools" on the pre-
vious page. Taking out the wheel
Unscrew the yellow central bolt.
Raise the spare wheel towards you
from the rear.
Take the wheel out of the boot.
Putting the wheel back in place
Put the wheel back in its housing.
Unscrew the yellow central bolt by a
few turns then put it in place in the
centre of the wheel.
Tighten fully until the central bolt
clicks to retain the wheel correctly.
Put the box back in place in the cen-
tre of the wheel.
P u t t h e b o o t l o o r b a c k i n p l a c e .
T y r e u n d e r - i n l a t i o n d e t e c t i o n
T h e s p a r e w h e e l i s n o t i t t e d w i t h
a sensor. The punctured wheel
must be repaired by a PEUGEOT
dealer.
Page 141 of 223
i
i
129
Fixing the steel or "space-
saving" type spare wheel
I f y o u r v e h i c l e i s i t t e d w i t h a l -
loy wheels, it is normal to notice,
w h e n t i g h t e n i n g t h e b o l t s o n i t t i n g ,
that the washers do not come into
contact with the steel or "space-
saving" type spare wheel. The
wheel is secured by the conical
contact of each bolt.
Access to the spare wheel (SW)
The spare wheel is installed in the boot
u n d e r t h e l o o r .
According to model, the spare wheel
may be steel or of the "space saving"
type.
To gain access to it, refer to the para-
graph "Access to the tools". Taking out the wheel
Unscrew the yellow central bolt.
Raise the spare wheel towards you
from the rear.
Take the wheel out of the boot.
Putting the wheel back in place
Put the wheel back in its housing.
Unscrew the yellow central bolt by a
few turns then put it in place in the
centre of the wheel.
Tighten fully until the central bolt
clicks to retain the wheel correctly.
Put the box back in place in the cen-
tre of the wheel.
P u t t h e b o o t l o o r b a c k i n p l a c e .
T y r e u n d e r - i n l a t i o n d e t e c t i o n
T h e s p a r e w h e e l i s n o t i t t e d w i t h
a sensor. The punctured wheel
must be repaired by a PEUGEOT
dealer.
Page 146 of 223
ii
134
REAR LIGHTS (SALOON)
1. Brake lights (P 21 W).
2. Side lights (R 5 W).
3. Fog lamps (P 21 W).
4. Direction indicators
(PY 21 W amber).
5. Reversing lights (P 21 W). Changing bulbs
T h e s e i v e b u l b s a r e c h a n g e d f r o m o u t -
side the boot :
r e m o v e t h e l i g h t i x i n g b o l t ,
take out the light from the outside,
disconnect the light connector,
remove the light seal,
press the four tabs and remove the
bulb holder,
turn the bulb one quarter of a turn
and change it.
I f t h e v e h i c l e i s i t t e d w i t h t h e J B L
audio system, on the right-hand
s i d e , o p e n t h e l a p i r s t t o g a i n a c -
c e s s t o t h e i x i n g b o l t .
Amber coloured bulbs, such as the
direction indicators, must be re-
placed with bulbs of identical speci-
i c a t i o n a n d c o l o u r . T o r e i t , c a r r y o u t t h e s e o p e r a t i o n s i n r e -
verse order.
Page 148 of 223
i
136
Rear lights (SW)
1. Brake lights (P 21 W).
2. Side lights (R 5 W).
3. Direction indicators (PY 21 W amber).
4. Fog lamps (P 21 W).
5. Reversing lights (P 21 W). Changing bulbs
T h e s e i v e b u l b s a r e c h a n g e d f r o m o u t -
side the boot:
r e m o v e t h e a c c e s s l a p ,
disconnect the light connector,
r e m o v e t h e l i g h t i x i n g b o l t ,
take out the light from the outside,
press on the four tabs and remove
the bulb holder,
turn the bulb a quarter of a turn and
change it.
T o r e i t , c a r r y o u t t h e s e o p e r a t i o n s i n r e -
verse order.
Take care to engage the light in its
guides keeping it in the centreline of the
vehicle.
T i g h t e n t h e i x i n g b o l t s u f i c i e n t l y b y h a n d
to guarantee the sealing of the light.
Amber coloured bulbs, such as the
direction indicators, must be replaced
w i t h b u l b s o f i d e n t i c a l s p e c i i c a t i o n
and colour.
1. Brake lights (P 21 W).
2. Side lights (R 5 W).
3. Direction indicators
(PY 21 W amber).
4. Fog lamps (P 21 W).
5. Reversing lights (P 21 W).
Page 159 of 223
!i
146
TOWING THE VEHICLE
Procedure for having your vehicle towed
or for towing another vehicle using a re-
movable towing eye.
Access to the tools Towing your vehicle
On the front bumper, unclip the cov-
er by pressing at the bottom.
Screw the towing eye in fully.
Install the towbar.
Switch on the hazard warning lights
on the towed vehicle.
On the rear bumper, unclip the cover
by pressing at the bottom.
Screw the towing eye in fully.
Install the towbar.
Switch on the hazard warning lights
on the towed vehicle.
Towing another vehicle
The towing eye is installed in the boot
u n d e r t h e l o o r .
To gain access to it:
open the boot,
r a i s e t h e l o o r ,
secure it by hooking its cord on the
hook on the shelf support,
remove the towing eye from the
holder. When towing with all four wheels on
the ground, always use a towbar.
When towing with only two wheels
on the ground, always use profes-
sional lifting equipment.
When towing with the engine off,
there is no longer any braking or
steering assistance.
Place the gear lever in neutral
(position N on the automatic
gearbox).
Failure to comply with this special
requirement may result in damage
to certain braking components and
the absence of braking assistance
the next time the engine is started.
