2007.5 Citroen C5 change wheel
[x] Cancel search: change wheelPage 43 of 231
46
II
S I G N A L L I N G
Direction indicators
Left, downwards.
Right, upwards.
For a change of direction, move the control stalk beyond the tight spot. The indicator is automatically cancelled when the steering wheel returns to its normal position.
« Motorway » function
M o v e t h e s t a l k b r i e fl y u p w a r d s o r downwards, without going beyond the resistance point; the direction i n d i c a t o r s w i l l fl a s h 3 t i m e s .
Hazard warning lamps
This operates all the direction indi-cators simultaneously.
Only use them to indicate dan-ger, for an emergency stop or for driving in abnormal conditions.
The hazard lamps can also be used with the ignition switched off.
The direction indicators cannot operate if the hazard warning lamps are on.
Emergency operation of haz-ard warning lamps
A sudden deceleration of the vehi-cle causes the hazard lamps to come on automatically.
They will cease to operate auto-matically, or manually if you press the hazard lamps button on the dashboard.
Page 58 of 231
62
II
BC
A
BDC
A
To choose the units for the outside temperature dis-play:1 Press on A.2 Using C, select the “Choice of temperature unit” menu. Con- fi r m b y p r e s s i n g o n C on the steering wheel or on D on the radio panel.3 Select the unit using C. Con- fi r m b y p r e s s i n g o n C on the steering wheel or on D on the radio panel.4 Validate “OK” on the screen.
To adjust the date and the time:1 Press on A.2 Using C, select the “Date and time adjustment” menu. Con- fi r m b y p r e s s i n g o n C on the steering wheel or on D on the radio panel.3 S e l e c t t h e d i s p l a y c o n fi g u r a t i o n with a press on C . C o n fi r m b y pressing on C on the steer-ing wheel or on D on the radio panel.4 Using B, adjust the date and t i m e , t h e n c o n fi r m b y p r e s s i n g on C on the steering wheel or on D on the radio panel.5 Press C to select the values y o u w i s h t o m o d i f y . C o n fi r m b y pressing on C on the steer-ing wheel or on D on the radio panel.6 Validate “OK” on the screen.
Selection of the type of infor-mation displayed
Consecutive presses on the end of the wiper control stalk allow you to select the type of information pre-sented on the multifunction display (date or radio/CD/CD MP3/CD changer).
M U L T I F U N C T I O N D I S P L A Y
Page 59 of 231
63
II
BDC
A
BC
A
E
1234
M U L T I F U N C T I O N D I S P L A Y
T E L E M A T I C S
ControlsA. Access to the telematics multi-function display menu.B. Cancellation of the operation or return to the previous display.C. Scrolling through the menus of the telematics multifunction display. Validation using steer-ing wheel controls.D. Validation using radio panel.E Selection of the type of infor-mation presented on the telematics multifunction display (date, radio/CD/CD MP3/CD changer/jukebox, navigation information, telephone).
T r a f fi c i n f o r m a t i o n
See NaviDrive instructions.
Navigation/guidance
See NaviDrive instructions.
Audio
See NaviDrive instructions.
Main Menu
Press on button A to display the telematics multifunction display “Main Menu”. This menu gives you access to the following functions:
Telephone and telematic services
See NaviDrive instructions.
Map
See NaviDrive instructions.
1 Outside temperature.2 Date.3 Telephone.4 Time.
When the outside temperature is between +3 °C and –3 °C, the t e m p e r a t u r e d i s p l a y fl a s h e s ( r i s k of ice).Note: The outside temperature displayed may be higher than the actual temperature if the vehicle is stationary in bright sunlight.
The driver is advised not to use the controls described opposite whilst driving.
C o n fi g u r a t i o n ,
allows you to adjust vari-ous settings (date, time...).
Video Menu, allows you to adjust various video set-tings.
Page 84 of 231
88
II
“ H Y D R A C T I V E I I I + ” S U S P E N S I O N
Position changes may only be made when the engine is run-ning.
Adjustable ground clearance responds to all types of situation. A p a r t f r o m a f e w s p e c i fi c s i t u a -tions, driving in the normal road position is imperative.
To change the position
Press once on one of the adjust-ment controls. The change in posi-tion is indicated by a message on the instrument panel screen:
Maximum height
Changing a wheel (Not possible if speed > 10 km/h).
Intermediate position
For an increased ground clearance (Not possible if speed > 40 km/h).
F o r u s e o n d i f fi c u l t r o a d s w h e n t r a v e l l i n g at reduced speed, as well as on carpark ramps.
Normal road position
Note: If the speed authorised for a par-ticular position is exceeded, the vehicle reverts automatically to the normal road position.
Minimum height
To facilitate loading or unloading the vehicle.
For workshop inspections.
Not to be used in normal driving (Not possible if speed > 10 km/h).
For your safety if you are operating underneath the vehicle, it is obligatory to support the vehicle with axle stands.
Viewing of the position of the vehicle
Once the adjustment has been made, a message is displayed on t he instru-ment panel screen.
Page 114 of 231
118
III
2
1
43
B O O T
1 Battery for vehicles with V6 HDi engine.2 Pull strap (spare wheel stowage).3 Boot lamp.4 6 CD changer.
Luggage securing rings
Use the 4 securing rings on the b o o t fl o o r t o s e c u r e y o u r l u g g a g e .
For safety reasons, in case of the need for sharp braking, you are advised to place heavy objects as far forward in the boot as possible.
Page 119 of 231
123
IV
C O N T R O L S A T T H E S T E E R I N G W H E E L
The controls at the steering wheel give you access to certain functions, without you needing to use the radio-CD control panel.
1
Shor t press- Cancel the current operation and return to the previous multifunction display screen.- For an incoming call: Refuse the call.
Long pressRetur n to the or iginal multifunc tion dis -play.
2MOLETTE DROITE
Rotate
- Radio mode: Scroll through pre-set sta-tions.- CD/ M P3 CD and CD changer sourc e: Scroll through CDs or chapters.- In the multifunction display menus: Move around and increase/decrease.
Shor t press
- In the multifunction display menus: Vali-dation.- Open shor tcut menus.- For an incoming call: Answer call.
Long pressOpen the multifunction display main menu.
3MENUShor t pressA c c e s s t h e m u l t i f u n c t i o n d i s p l ay m a i n menu.
4VOL +S h o r t p r e s s / Press and holdIncrease volume.
5VOL -S h o r t p r e s s / Press and holdDecrease volume.
6MUTEShor t press- First press: mute.- Second press: cancel mute.
7
Shor t press
- Radio source: Automatic search of higher frequencies.- CD/MP3 CD and CD changer source: Search of the next track.
Long press- CD/MP3 CD and CD changer source: Fast forward with accelerated sound.
8
Shor t press
- Radio source: Automatic search of low-er frequencies.- CD/MP3 CD and CD changer source: Search of previous track.
Long press- CD/MP3 CD and CD changer source: Rapid reverse with accelerated sound.
9LISTShor t press
- Radio source: Display of the list of radio stations available.- CD/MP3 CD and CD changer source: Display of list of tracks of the CD.
Long pressUpdate of list of stations.
10COM GShort pressActivation of voice recognition.
Long pressNavigation instructions.
11COM DPressScroll through the multifunction display screen.
Page 125 of 231
129
IV
Selecting CD source
After inserting a CD, with the printed side facing upwards, the player will start playing the CD automatically.
To change manually to CD source (CD already inserted), press button D until you obtain the source you require.
Ejecting a CD
Press button B to eject the CD, the Baudio system will automatically switch to radio source.
If the CD is not removed within 10 to 15 seconds of being ejected, it will auto-matically be taken back into the CD player, although it will not be played.
Selecting a track
Press button K once to play the next Ktrack.
Press button N once to return to the beginning of the track currently being played, press a second time to go back to the start of the previous track.
Press the buttons successively to skip several tracks at a time.
You can also perform this operation using button G or button 9 at the steer-9ing wheel.
When the track listing is displayed, select the desired track using buttons Jor M then validate with button L.
C D S O U R C E
You can also do this via the controls 7and 8 at the steering wheel.8
Fast forward and rapid reverse with accelerated sound
To move swiftly through the CD, press and keep pressed button K or KN, respectively for fast forward or rapid reverse with accelerated sound.
You can also do this via the controls 7and 8 at the steering wheel.8
Play resumes as normal when the but-ton is released.
Menu
This menu allows activation/deactiva-tion of two options: P l a y b a c k o f t h e fi r s t 7 s e c o n d s (approx.) of each track of the CD.Random playback of the CD tracks.
This can be accessed in two ways:Either by pressing button O and Oproceeding as for Scanning of RDS stations – the sub-menu for Audio Preferences.
Or, provided you are in CD source, by pressing onbutton L. You can then access the Audio menu.Note: If one of these options is active, it remains active for CD changer source.
Page 169 of 231
173
VI
I f y o u r v e h i c l e i s fi t t e d w i t h a s p a r e w h e e l o f a d i f f e r e n t s i z e t o those on the vehicle, you must not exceed 80 km/h (50 mp h) whilst using the spare wheel.
T h e w h e e l b o l t s a r e s p e c i fi c t o t h e t y p e o f w h e e l .
If the type of wheel is changed, check with your CITROËN dealer that the wheel bolts are compatible with the new wheels.
Note: take care to note down the code number engrav ed on the head of the anti-theft bolt socket. This will enable you to obtain replacement anti-theft bolt sockets from a dealership.
Spare wheel
Y o u r v e h i c l e m a y b e fi t t e d w i t h a different spare wheel to those on t h e v e h i c l e . W h e n fi t t i n g t h e s p a r e wheel, it is normal to notice that the wheel bolt washers do not come into contact with the wheel rim.
The spare wheel is secured by the conical tapering of the wheel bolt’s shaft. See illustration.
W h e n r e fi t t i n g t h e o r i g i n a l w h e e l , ensure that the wheel bolt contact surfaces are clean and in good condition.
R e fi t t i n g a w h e e l1. Fit the wheel on the hub, using the centring guide. Make sure that the contact surface between the hub and the wheel is clean.2. Screw in the bolts but do not fully tighten them.3. Lower the jack and remove it.4. Tighten the wheel bolts, using the wheelbrace.5. R e fi t t h e p r o t e c t o r s o n t h e bolts.6. Return the ground clearance to the normal position. See chap-ter “Hydractive III+ Suspen-sion”.7. Ensure the tyre pressure is c o r r e c t ( s e e “ V e h i c l e i d e n t i fi c a -tion”) and have the balancing checked.
W h e e l e q u i p p e d w i t h d e fl a -tion detection sensor
Such wheels have tyre pressure sensors. It is essential to have repairs carried out by a CITROËN dealer.
Anti-theft bolts
Each wheel is equipped with one anti-theft bolt.
To remove it1. Remove the protector using tool 3.2. Use the anti-theft socket with the handle.
C H A N G I N G A W H E E L