52
II
W I P E R S
Screen wash
Pull the screen wipe control stalk towards you.
The screen wash is accompanied by a timed wipe sequence. If the dipped beams are on, it is also accompanied by a timed headlamp wash.
Check that the wipers can operate freely in freezing temperatures.
Remove any accumulation of snow at the base of the windsc reen.
Changing the wiper blades
If changing the wiper blades, they must be stopped in the maintenance posi-tion. For this, switch off the ignition and then within one minute move the wiper control stalk. The wipers stand up vertically.
After replacement, switch on the ignition and move the wiper control stalk so that the wipers resume their normal position.
Remark: The maintenance position can also be used in snowy conditio ns to avoid a build up of snow.
