2006 YAMAHA YD110 Owners Manual

Replenishing the battery fluidcSV~jh esa nzo ¼¶Y;wM½ dks iqu% HkjukA poorly maintained battery will
corrode and discharge quickly. The
battery fluid should be checked at
least once a month. The level
should be between the minimum
level and maximum level marks.
Use only distilled water if refilling
is necessary.lgh rjg ls ns[kHkky u djus ij cSV~jh
tax idM+ ysrh gS vkSj tYnh fMLpkt+Z gks
tkrh gSA cSV~jh ds nzo dks eghus esa de
ls de ,d ckj vo'; tk¡p ysuk pkfg,A
nzo dk Lrj ¼ysoy½ U;wre rFkk vf/kdre
fpUgksa ds e/; gksuh pkfg,A bls fQj ls
Hkjus ds fy, dsoy fMfLVYM okWVj dk
iz;ksx djsaA CAUTION :Normal tap water contains
minerals which are harmful to a
battery; therefore, refill only with
distilled water.
lko/kkuh %
Vadh ds lk/kkj.k ikuh esa [kfut inkFkZ
gksrs gSaA tks cSV~jh ds fy, gkfudkjd gks
ldrs gSaA blfy, dsoy fMfLVYM okWVj
ls gh bls iqu% HkjsA
WARNING
psrkouhbl ckr dk /;ku j[ksa fd cSV~jh dk nzo
eksVjlkbfdy dh pSu ij u fc[kjus
ik,A cSV~jh dk ¶Y;wM pSu dks det+ksj
dj ldrk gS] ftlls pSu dh dke djus
dh fe;kn de gks ldrh gS vkSj laHkor%
blls dksbZ nq?kZVuk Hkh ?kV ldrh gSA
lqfuf'pr djsa fd ^bysDV ªksykbZV* dk Lrj U;wure rFkk vf/kdre fu'kkuksa ds chp esa gh jgsA
;fn t+:jr iM+s rks dsoy ^fMfLVYM okWVj* dk gh iz;ksx djsaA
6.35
Take care not to spill battery fluid
on the chain causing shorter chain
life and possibly result in an
accident.
PERIODIC MAINTENANCE AND MINOR REPAIR
lkef;d j[kj[kko rFkk ekewyh ejEer
pg56_96.pmd9/24/2005, 7:53 AM 71

Battery storagecSV~jh dk HkaMkj.k ¼LVkssjsst½ %1. When the Motorcycle will not be
used for a month or longer,
remove the battery, fully charge
it and store it in a cool, dry place.
Completely recharge the battery
before reinstallation.
;fn eksVjlkbfdy dks ,d eghus ;k
mlls vf/kd le; rd iz;ksx ugha
fd;k tk jgk gks rks cSV~jh dks ckgj
fudky ysa] bls iwjh rjg ls pkt+Z djsa
vkSj BaMs rFkk lw[ks LFkku ij ^laHkky*
¼LVksj½ dj j[ksaA iqu% yxkus ls igys
bls iw.kZr;k nqckjk ls pkt+Z djsaA
2. If the battery will be stored for
longer than two months, check
the specific gravity of the fluid
at least once a month and fully
recharge the battery when it is
too low.
;fn cSV~jh dks nks eghus ls vf/kd
le; ls ^LVksj* djds j[kk x;k gks rks
eghus esa de ls de ,d ckj blds
nzo ds vkisf{kd ?kuRo ¼LisfLQd xzsfoVh½
dh tk¡p dj ysaa vkSj ;fn cgqr T;knk
de yxs rks cSV~jh dks iw.kZr;k pkt+Z
djsaA
3. Always make sure the
connections are correct when
putting the battery back in the
motorcycle. Make sure the
breather hose is properly
connected and is not
damaged or obstructed.
tc Hkh cSVjh dks nqckjk yxk;sa ;g
lqfuf'pr dj ysa fd cSV~jh ds dusD'ku
lgh rjhds ls yxs gksaA ;g Hkh
lqfuf'pr djsaa fd czhnj gkst+ dks Bhd
rjhds ls yxk;k ¼dusDV½ x;k gks
vkSj ;g {kfrxzLr vFkok :dk gqvk u
gksA
6.36
1. Main fuse
eq[; ¶;wt+ ¼eSu&¶;wt+½
Fuse replacement¶;wt+ dks cnyukThe fuse is located behind panel
A. (See page 6-7 for panel remove
and installation procedures.)^¶;wt+* iSuy ^,* ds ihNs yxk gksrk gSA
iSuy dks yxkus vkSj gVkus dh izfØ;k ds
fy, i "B la[;k
6-7
dks ns[ksa½A
If the fuse is blown, turn off the
main switch. Install a new fuse of
proper amperage. Turn on the
switches and see if the electrical
device operates. If the fuse
immediately blows again, consult
a YMIS dealer.
PERIODIC MAINTENANCE AND MINOR REPAIRlkef;d j[kj[kko rFkk ekewyh ejEer
2
pg56_96.pmd9/24/2005, 7:53 AM 72

1. Bezel
cst+y
Headlight bulb replacementgSM ykbZV ds cYc dks cnyukIf the headlight bulb burns out,
replace the bulb as follows;fn gSM ykbZV dk cYc [kjkc gks tkrk gS
rks bls uhps nh xbZ fof/k ls cny nsa %1. Remove the two screws from
the bezel assy of the headlight.
ct+y vlsEcyh ds nks isapks dks [kksy
dj gVk ysaA
2. Unscrew the bulb holder from
reflector assy.
cYc gksYMj dks fjQysDVj&vlsEcyh
esa ls [kksydj fudky ysaA
CAUTION :Do not use fuse of higher
amperage rating than those
recommended. Substitution of a
fuse of improper rating can
cause extensive electrical
system damage and possibly a
fire. lko/kkuh %izLrkfor fd;s x;s ¶;wt+ ds vfrfjDr]
dksbZ nwljk mPp ,eih;j ek=kk dk ¶;wt+
iz;ksx u djsaA fodYi ds :i esa vuqfpr
ek=kk dk ¶;wt+ fctyh ds foLr r iz.kkyh
dks uqdlku igqapk ldrk gS vkSj laHkor%
blls vkx Hkh yx ldrh gSASpecified fuse
fufnZ"V fd;k x;k ¶;wt
: 10A
+
;fn ¶;wt+ mM+ x;k gks] rks eSu fLop dks
?kqekdj can dj nsa vkSj l£dV dks tk¡p
ds fy, can dj nsaA leqfpr ^,Eih;j* dk
u;k ¶;wt yxk;saA cVuksa dk ?kqek,a vkSj
ns[ksa fd D;k fctyh ds lalk/ku Bhd rjg
ls dke dj jgs gSaA ;fn rqjar ¶;wt+ fQj
ls mM+ tkrk gS rks okbZñ,eñvkbZñ,lñ Mhyj
ls fQj ls lEidZ djsaA
PERIODIC MAINTENANCE AND MINOR REPAIR
lkef;d j[kj[kko rFkk ekewyh ejEer
6.37
1
pg56_96.pmd9/24/2005, 7:53 AM 73

1. Bulb
cYc
WARNINGKeep flammable products and
your hands away from the bulb
while it is on, as it is hot. Do not
touch the bulb until it cools
down. psrkouh %ftl le; cYc ty jgk gks vkSSj xeZ gks
rks Toyu'khy oLrqvksa vkSj vius gkFkksa dks
blls nwj j[ksaA ml oDr rd cYc dks
gkFk u yxk,a tc rd ;g BaMk u gks
tk,A
1. Bulb holder
cYc gksYMj
3. Remove the defective bulb.

[kjkc+ cYc dks ckgj fudky ysaA
4. Put a new bulb into position
and secure it in place with the
bulb holder.
u;s cYc dks mfpr LFkku ij yxk,a
vkSj cYc gksYMj ds lkFk mls lqjf{kr
LFkku ij j[k nsaA
5. Install the Bezel Assy.
ct+y vlsEcyh dks yxk,aA
6. If the headlight beam
adjustment is necessary, ask
a YMIS dealer to make
adjustment.
;fn gSMykbZV dh che dh ,M~tLVesaV
djuk vko';d gks rks
okbZñ,eñvkbZñ,lñ Mhyj ls bls
^,M~tLV* djus dks dgasA
6.38
PERIODIC MAINTENANCE AND MINOR REPAIRlkef;d j[kj[kko rFkk ekewyh ejEer
1
1
pg56_96.pmd9/24/2005, 7:53 AM 74

1. Indicator Screw (x 2)
baMhdsVj ds isp
(x 2)
Turn signal and taillight bulb
replacement?kqekonkj ladsrd ¼flXuy½ rFkk fiNyh
^ykbV* dss cYc dks cnyukA1. Remove the screw and the
lense.
isapks vkSj ySal dks [kksydj vyx dj
ysaA
2. Push the bulb inward and turn
it counterclockwise.
cYc dks vanj dh rjQ nck,a vkSj
bls nkb± ls ckb± vksj ?kqek,aA
3. Place a new bulb inward and
turn it clockwise until it
engages into the socket.
1. Taillamp Screws (x 2)
ihNs ds ySai ds isap
(× 2 )
CAUTION :Do not overtighten the screws as
the lense may break. lko/kkuh %isapks dks t:jr ls T;knk u dls vU;Fkk
ySal VwV ldrk gSA3.
lkWdsV esa u;k cYc yxk nsaaA cYc dks
vanj dh rjQ nck,a vkSj blss ckb± ls
nkb± vksj rc rd ?kqek,a tc rd ;g
lkWdsV ds vanj Bhd rjg ls cSB u
tk,A
4. Install the lense and the
screws.
ySal vkSj isapks dks fQj ls yxk nsaA
6.39
PERIODIC MAINTENANCE AND MINOR REPAIR
lkef;d j[kj[kko rFkk ekewyh ejEer
1
1
pg56_96.pmd9/24/2005, 7:53 AM 75

1. Brake cable adjusting nut
czsd dh rkj dk ,M~t¯LVx uVA
1. Place the Motorcycle on the
centerstand.eksVjlkbfdy dks chp okys LVS.M ij
yxkdj [kM+k djsaA
2. Fully loosen the brake cable
adjusting nut at the wheel hub
and remove the cable from the
brake cam lever.
ifg, ds gc ij yxs czsd dh rkj ds
,M~t¯LVx uV dks iwjk [kksy ysa vkSj
rkj ¼dscy½ dks cszd ds dSe yhoj esa
ls ckgj fudky ysaA
Front wheel removalvxys ifg, dks gVkuk WARNING It is advisable to have a YMIS
dealer service the wheel.
 Securely support the
Motorcycle so there is no
danger of it falling over. psrkouh
mi;qDr ;gh gS fd okbZñ,eñvkbZñ,lñ
Mhyj ls gh ifg, dh ^l£ol* djkbZ
tk,A

eksVjlkbfdy dks lqjf{kjr rjhds ls
lgkjk nsa rkfd bls iyV dj fxjus
dk [krjk u jgsA
6.40
PERIODIC MAINTENANCE AND MINOR REPAIRlkef;d j[kj[kko rFkk ekewyh ejEer
1
pg56_96.pmd9/24/2005, 7:53 AM 76

1. Stopper
LVkWij
Front wheel installationvxys ifg, dks yxkukWhen installing the front wheel,
reverse the removal procedure.tc vxys ifg, dks yxkuk gks rks ifg;k
gVkus dh ^izfØ;k* dks myV nsaA
fuEufyf[kr rF;ksa ij /;ku nsaA1. Make sure the slot in the brake
shoe plate fits over the stopper
on the front fork outer tube.
;g lqfuf'pr dj ysa fd czsd dh
'kw&IysV esa cuk gqvk LykWV] vxys
QksdZ dh ckgjh V~; c ij yxs LVkWij
ds lkFk ^fQV* ¼Bhd rjg ls cSB tk,½
gks tk,A
1. Cotter pin
dkWij fiu
2. Axle nut
,Dly uV
5. Remove the cotter pin and axle
nut.
dkWVj fiu rFkk ,Dly uV dks [kkssydj
ckgj fudky ysaA
6. Remove the wheel axle. Make
sure the Motorcycle is properly
supported.
ifg, ds ,Dly dks ckgj fudky ysaA
lqfuf'pr djsa fd eksVjlkbZfdy dks
mfpr lgkjk feyrk jgsA
1. Clip
fDyi
2. Speedometer cable
LihM+¨ehVj dscy
4. Remove the speedometer
cable from the front wheel side.
First remove the clip and then
pull the cable out.
LihM+¨ehVj dscy d¨ vxys ifg;s
ls gVk;saA igys fDyi d¨ gVk;sa
v©j mlds ckn dscy d¨ [khpsaA
6.41
PERIODIC MAINTENANCE AND MINOR REPAIR
lkef;d j[kj[kko rFkk ekewyh ejEer
2
1
2
1
1
pg56_96.pmd9/24/2005, 7:53 AM 77

Rear wheel removalfiNys ifg, dks gVkuk
WARNING
 It is advisable to service the
wheel by YMIS dealer.
 Securely support the
Motorcycle so there is no
danger of it falling over. psrkouh
mi;qDr ;gh gS fd ifg, dh ^l£ol*
okbZñ,eñvkbZñ,lñ Mhyj ls gh djkbZ
tk,A

eksVjlkbfdy dk lqjf{kr rjhds ls
lgkjk nsdj [kM+k djsaA rkfd bls
iyV dj fxjus dk [krjk u jgsA
Axle nut torque
,Dly ds uV dk VkdZ %
33 ft.-lb (4.55 m-kg)
2. Make sure the axle nut is
properly torqued and a new
cotter pin is installed.
;g lqfuf'pr djsa fd ,Dly ds uV
dks lgh rjhds ls dlk
gqvk gks vkSj
ml ij u;k dkWVj fiu yxk gksA
WARNINGAlways use a new cotter pin. psrkouhges'kk dkWVj fiu dk iz;ksx djsaA3. Adjust the free play in the brake
lever.
czsd yhoj ds Ýh&Iys dks ,M~tLV
djsaA
1. Nut
uV
2. Cotter pin
dkWVj fiu
3. Tension bar
Vsa'ku ckj
1. Place the Motorcycle on the
centerstand.
eksVjlkbfdy dks chp ds LVS.M ij
[kM+k djsaA
2. Remove the cotter pin and nut.
Then remove the tension bar
from the brake shoes plate.
dkWVj fiu vkSj uV dks gVk nsaA mlds
ckn 'kw&IysV esa ls ^Vsa'ku&ckj* dks
ckgj fudky ysaA
6.42
PERIODIC MAINTENANCE AND MINOR REPAIRlkef;d j[kj[kko rFkk ekewyh ejEer
2
1
3
pg56_96.pmd9/24/2005, 7:53 AM 78