1 - 9
GEN
INFO
CONTROL FUNCTIONS
EC155001
THROTTLE GRIP
The throttle grip 1 is located on the right han-
dlebar; it accelerates or decelerates the
engine. For acceleration, turn the grip toward
you; for deceleration, turn it away from you.
1
EC156000
FRONT BRAKE LEVER
The front brake lever 1 is located on the right
handlebar. Pull it toward the handlebar to acti-
vate the front brake.
1
EC157000
REAR BRAKE PEDAL
The rear brake pedal 1 is located on the right
side of the machine. Press down on the brake
pedal to activate the rear brake.
1
FUEL COCK
The fuel cock supplies fuel from the tank to
carburetor while filtering the fuel. The fuel cock
has the three positions:
OFF: With the lever in this position, fuel will not flow. Always return the lever to this posi-
tion when the engine is not running.
ON: With the lever in this position, fuel flows to the carburetor. Normal riding is done
with the lever in this position.
RES: This indicates reserve. If you run out of fuel while riding, move the lever to this
position. FILL THE TANK AT THE FIRST
OPPORTUNITY. BE SURE TO SET
THE LEVER TO “ON ” AFTER REFUEL-
ING.
4 - 57
ENGSHIFT FORK, SHIFT CAM AND TRANSMISSION
2. Install:Main axle assembly 1
Drive axle assembly 2
Shift fork 2 “R ” 3
Shift fork 1 “L ” 4
Shift cam 5
Guide bar 6
NOTE:
The embossed marks on the shift forks
should face towards the right side of the
engine and be in the following sequence:
“R ”, “L ”.
Mesh the shift fork 2 “R ” with the 3rd wheel
gear on the drive axle.
Mesh the shift fork 1 “L ” with the 2nd pinion
gear on the main axle.
3. Check: Shifter operation
Transmission operation
Unsmooth operation → Repair.
3
4
5 1
6
2
