2006 YAMAHA BRUIN 350 4WD battery

[x] Cancel search: battery

Page 18 of 402

YAMAHA BRUIN 350 4WD 2006  Notices Demploi (in French) Adjusting the rear brake light switch... 8-87
Cable inspection and lubrication ........ 8-89
Lubricating the brake levers and 
brake pedal ...................................... 8-91
Wheel removal ...

Page 78 of 402

YAMAHA BRUIN 350 4WD 2006  Notices Demploi (in French) 4-13 1. Light switch “//OFF”
2. Engine stop switch “/”
3. Start switch “”
4. Horn switch “”
1. Contacteur d’éclairage “//OFF”
2. Coupe-circuit du moteur “/”
3. Contacteur du

Page 146 of 402

YAMAHA BRUIN 350 4WD 2006  Notices Demploi (in French) 6-7 a. Starter (choke) 
1. Fully open
2. Half open
3. Closed
a. Starter (enrichisseur)
1. Complètement ouvert
2. Mi-ouvert
3. Fermé
a. Arrancador (estrangulador)
1. Abre completamente
2. Semiabierto

Page 346 of 402

YAMAHA BRUIN 350 4WD 2006  Notices Demploi (in French) 8-97
EBU00381
Battery
This machine is equipped with a sealed-type bat-
tery. Therefore it is not necessary to check the
electrolyte or add distilled water in the battery. If
the battery seems to have

Page 348 of 402

YAMAHA BRUIN 350 4WD 2006  Notices Demploi (in French) 8-99
WARNING
Battery electrolyte is poisonous and danger-
ous, causing severe burns, etc. It contains sul-
furic acid. Avoid contact with skin, eyes or
clothing.
Antidote:
EXTERNAL: Flush with water.

Page 350 of 402

YAMAHA BRUIN 350 4WD 2006  Notices Demploi (in French) 8-101
EBU00385
Battery maintenance
1. When the machine is not used for a month or
longer, remove the battery and store it in a
cool, dark place. Completely recharge the
battery before reinstallation.C

Page 366 of 402

YAMAHA BRUIN 350 4WD 2006  Notices Demploi (in French) 8-117
EBU04400Troubleshooting chart1. Fuel
Check if there is fuel
in the fuel tank.There is fuel.Turn the fuel cock
lever to “OFF”.No fuel.Fuel cock is
clogged.
Clean the 
fuel cock. Some fuel.Tur

Page 378 of 402

YAMAHA BRUIN 350 4WD 2006  Notices Demploi (in French) 9-9
5. Tie a plastic bag over the exhaust pipe outlet
to prevent moisture from entering.
6. If storing in a humid or salt-air atmosphere,
coat all exposed metal surfaces with a light
film of oil. Do n
Page:   1-8 9-16 next >