2006 YAMAHA BRUIN 250 battery

[x] Cancel search: battery

Page 16 of 396

YAMAHA BRUIN 250 2006  Manuale de Empleo (in Spanish) EBU00015
1-CONTENTS
LOCATION OF THE WARNING AND 
SPECIFICATION LABELS ....................... 1-1
SAFETY INFORMATION ......................... 2-1
DESCRIPTION AND MACHINE 
IDENTIFICATION .............

Page 18 of 396

YAMAHA BRUIN 250 2006  Manuale de Empleo (in Spanish) Wheel removal ................................... 8-81
Wheel installation ............................... 8-83
Battery ............................................... 8-85
Replenishing the battery flu

Page 66 of 396

YAMAHA BRUIN 250 2006  Manuale de Empleo (in Spanish) 3-1
EBU00032
1-DESCRIPTION AND MACHINE 
IDENTIFICATION1. Storage compartment
2. Air filter case
3. Engine oil dipstick
4. Front brake fluid reservoir
5. Brake pedal
6. Clutch adjusting bolt
7. Engine

Page 82 of 396

YAMAHA BRUIN 250 2006  Manuale de Empleo (in Spanish) 4-7 1. Light switch “//OFF”
2. Engine stop switch “/” 
3. Start switch “”
4. Horn switch “”
1. Contacteur d’éclairage “//OFF”
2. Coupe-circuit du moteur “/”
3. Contacteur du

Page 110 of 396

YAMAHA BRUIN 250 2006  Manuale de Empleo (in Spanish) 5-1
EBU00113
1-PRE-OPERATION CHECKS
Before using this machine, check the following points:
ITEM ROUTINE PAGE
Front brakeCheck operation, free play, fluid level and fluid leakage.
Fill with DOT 4 bra

Page 126 of 396

YAMAHA BRUIN 250 2006  Manuale de Empleo (in Spanish) 5-17
EBU11620
Fittings and fasteners 
Always check the tightness of chassis fittings and
fasteners before a ride. Take the machine to a
Yamaha dealer or refer to the Service Manual for
correct tighten

Page 142 of 396

YAMAHA BRUIN 250 2006  Manuale de Empleo (in Spanish) 6-7 a. Starter (choke) 1. Fully-open
2. Half open 3. Closed
a. Starter (enrichisseur) 1. Complètement ouvert
2. Mi-ouvert 3. Fermé
a. Starter (choke) 1. Abre completamente
2. Semiabierto 3. Cerrado

Page 262 of 396

YAMAHA BRUIN 250 2006  Manuale de Empleo (in Spanish) 8-9
NOTE:
Recommended brake fluid: DOT 4

Brake fluid replacement:
When disassembling the master cylinder or caliper, replace the brake fluid. Normally check the
brake fluid level and add fluid as
Page:   1-8 9-16 next >