2006 VOLVO XC70 key

181
Steering wheel key pad
(option)
If the vehicle is equipped with the key pad in
the steering wheel press the right or left arrow
to switch between preset stations.
Scan
Press the SCAN button to start the station scan
function. When a station is found, scanning
stops for approximately 10 seconds, after
which scanning will continue.
Press the SCAN or SOURCE button when a
station has been found if you would like to
listen to that station and to discontinue the
scan function.
Station seek up/down
Press or to start the seek function. The
radio seeks the next audible station and tunes
it in. Repeat the procedure to continue the seek
function.
Radio functions HU-650/HU-850
3905010m
Manual station search
Press or and hold it down. MAN will
be shown in the display. The radio scans
slowly in the selected direction and will
increase the scanning speed after a few
seconds. Release the button when the desired
frequency appears in the display.
The frequency can be fine-tuned by short
presses on the
or keys.
The system will remain in manual search
mode for 5 seconds after the button is released,
after which it will return to seek mode.V70/XC70 V70 R3902452d3905086m

186
HU-650 - CD player
Starting the CD player
Please refer to the illustration on page 177 for
the location of the buttons referred to on this
page.
%
 
 


*
9 5')+="5H
5'

Changing tracks
Briefly press the or keys (or the
corresponding keys on the optional steering
wheel keypad) to skip to the previous or next
track. The track number is shown in the
display.
Fast forward/back
Press and hold down the or keys to
search within a track or the entire disc. The
search continues for as long as the buttons are
held in.
  

 

 
 
 
$


Random play
This function plays the tracks on a CD in
random order (shuffle).
•)5'
 "'

"'   



  



•9 "'

 



Scan
This function plays the first 10 seconds of each
track on the CD.
•9 )5( 


•9 )5(

HJ  


 



CD eject
Press the button (no. 11 in the illustration on
page 177) to eject the disc.

•@
 

>5'
 %*  







5'
 

  


•)
%.0



  

187
HU-850 - internal CD changer
Starting the CD changer
The HU-850 is equipped with an internal, 6-
disc CD changer.
Please refer to the illustration on page 178 for
the location of the buttons referred to on this
page.
To load discs into the changer:
%
9 5')+="5H
5'

*
)
  
 
 
  
  

G+('')5 
 

   



-
 
 

If there are discs in the player when CD mode
is selected, the changer will resume playing the
disc and track that were most recently played.
Selecting a disc position
(number)
Use the station setting buttons 1-6 to select the
disc to be played. The number of the disc and
the track being played are shown in the
display.
Changing tracks
Briefly press the or keys (or the
corresponding keys on the optional steering
wheel keypad) to skip to the previous or next
track. The track number is shown in the
display.
Fast forward/back
Press and hold down the or keys to
search within a track or the entire disc. The
search continues for as long as the buttons are
held in.
  

 

 
 
 
$


Random play
This function plays the tracks on a CD in
random order (shuffle).
•)5'
 "'

"'   



 


"

 

   


•9 "'

 



Scan
This function plays the first 10 seconds of each
track on the CD.
•9 )5( 


•9 )5(

HJ  


 



)
   

CD eject
This function makes it possible to eject a
single disc, or to eject all of the discs in the
changer.
•9 >>
 
 


•( ,
  1

  >
 




•HEH5(GG
 
 

 
 


 

•@
 


%*
 > 

(
 


 


5'

 
  



•)
%.0



  

188
External CD changer (option)
External CD changer
The optional 10-CD changer is mounted in the
cargo compartment.
Please refer to the illustrations on pages 177
and 178 for the location of the buttons referred
to on this page.
Turn the SOURCE knob to select the external
CD changer.
To load discs into the changer:
%
)5'


*
9 >5'


-
9

A


  , 1

/
9 

A


 



3903125m
If there are discs in the player when CD mode
is selected, the changer will resume playing
the disc and track that were most recently
played.
Selecting a disc position
(number)
Use the station setting buttons 1-6 to select the
disc to be played. Continue to press button 6 to
select discs 7-10.
The number of the disc and the track being
played are shown in the display.
Changing tracks
Briefly press the or keys (or the
corresponding keys on the optional steering
wheel keypad) to skip to the previous or next
track. The track number is shown in the
display.
Fast forward/back
Press and hold down the or keys to
search within a track or the entire disc. The
search continues for as long as the buttons are
held in.
  

 

 
 
 
$


Random play
This function plays the tracks on a CD in
random order (shuffle).
•)5'
 "'

"'   



 


"

 

   


•9 "'

 



Scan
This function plays the first 10 seconds of
each track on the CD.
•9 )5( 


•9 )5(HJ  


 



)
   

193 5

 
During programming, your hand-held transmitter may automatically stop
transmitting. To successfully train HomeLink®, continue to hold the
HomeLink® button. At the same time, repeatedly press and hold your
hand-held transmitter’s button at two-second intervals until HomeLink®
has learned your transmitter’s code. The HomeLink® indicator light
will flash first slowly, and then rapidly to indicate that the button has
been successfully programmed.
Determining if your garage door uses a rolling code
Determine, in one of the following ways, if your garage door uses a
rolling code system and is manufactured after 1996:
•"

C 




•
 
 

 

GY
=

 
 











•9 

GY






GY




  


8
* 

To train a rolling code garage door opener, follow these instructions
after programming the desired transceiver button according to “Program-
ming the transceiver.” The help of a second person may make training
easier.
%
G




,$













C 


 
   % &22 -FF -F%F ,#

G
1

*
9 :
;



:
; 

-
9 



GY
9 




GY





)

 
 
$



GY=

 






 

 

  
 




The remaining two HomeLink® buttons can be programmed in the
same way. In the event of any problems in programming the
HomeLink® Universal Transceiver, call toll-free 1-800-355-3515
(Internet: www.HomeLink.com).
Operating the HomeLink® Universal Transceiver
Once programmed, the HomeLink® Universal Transceiver can be used
in place of your hand-held transmitters.
To operate, the key must be turned to the “accessory” position (II) or
the engine must be running. Press the programmed HomeLink® button
to activate the garage door, driveway gate, security lighting, home
security system, etc.
Your original hand-held transmitters may, of course, be used at any
time.
Erasing programmed buttons
Individual buttons cannot be erased. To erase all three programmed
buttons:
%
:
 ; ,1

*

  
GY=


 
*2  
GYC 

 


-
"


The HomeLink® buttons can be reprogrammed using the procedures
described on the previous page.
,
GY
 8
1
HomeLink® Universal Transceiver (option)