Page 121 of 138
This function automatically searches for and stores up to 10 strong AM or FM stations in a separate memory. If more
than ten stations are found, the ten strongest ones are stored. This function is especially useful in areas in which you
are not familiar with radio stations or their frequencies.
To use the AUTO function:
1. Select radio mode using the AM or FM buttons, or by turning the SOURCE knob.
2. Start the search by pressing AUTO for more than 2 seconds.
3. AUTO appears in the display and a number of stations with strong signals (max. 10) from the selected frequency
band will be stored in the auto-store memory. If there are no stations with sufficient signal strength, NO STATION is
displayed.
4. Press the AUTO button or the arrow keys on the optional steering wheel controls briefly to select the stored stations.
When the radio is in auto-store mode, AUTO is shown in the display. AUTO disappears when you return to the
normal radio mode.
Return to the normal radio mode by pressing the AM, FM, or EXIT button.
To return to the Auto-store mode, press the AUTO button briefly.
Contents | Top of Page
ProCarManuals.com
Page 124 of 138
original hand -held transmitter can also be used, as desired, to operate the garage door.
The remaining two HomeLink® buttons can be programmed in the same way. In the event of any problems in
programming the HomeLink® Universal Transceiver, call toll-free 1-800-355-3515 (Internet: www.HomeLink.com
).
Operating the HomeLink® Universal Transceiver
Once programmed, the HomeLink® Universal Transceiver can be used in place of your hand -held transmitters.
To operate, the key must be turned to the "accessory" position (II) or the engine must be running. Press the
programmed HomeLink® button to activate the garage door, driveway gate, security lighting, home security system,
etc.
Your original hand -held transmitters may, of course, be used at any time.
Erasing programmed buttons
Individual buttons cannot be erased. To erase all three programmed buttons:
1. Turn the ignition key to the "accessory" position (II).
2. Hold down the two outside buttons on the HomeLink® Universal Transceiver for about 20 seconds, until
HomeLink®'s indicator light begins to flash.
3. Release both buttons.
The HomeLink® buttons can be reprogrammed using the procedures described on the previous page.
(HomeLink® information continues on the next page)
pg. 194 HomeLink® Universal Transceiver (option)
Reprogramming a single HomeLink® button
1. Press and hold the desired HomeLink® button. Do not release the button until step 3 has been completed.
2. When the indicator light begins to flash slowly (after approximately 20 seconds), position your hand -held
transmitter 2 to 5 in. (5 to 12 cm) away from the HomeLink® surface.
3. Press and hold the hand -held transmitter button. The HomeLink® indicator light will flash first slowly, then rapidly.
When the indicator light flashes rapidly, release both buttons.
The previously programmed device has now been erased and the new device can be activated by pressing the
HomeLink® button that has just been programmed. This procedure will not affect any other programmed HomeLink®
buttons.
NOTE:
Retain the original transmitter(s) for future programming procedures (e.g., if you purchase a new car).
For your own security, erase all programmed buttons on the HomeLink® Universal Transceiver when you sell your
car.
Metallic sun protection films should not be used on any windows in a car equipped with HomeLink® Universal
Transceiver. This could interfere with the transceiver's function.
ProCarManuals.com
Page 130 of 138
Head restraint - center rear66
Head restraint rear65
Headlight flash37
Headlight wiper blades - replacing164
Headlights35, 37
Heated front seats40
Heated rear window40
Heated sideview mirrors40
Heating50-53
High beam flash37
High/low beam headlights37
Hoisting the car157
Holder for grocery bags70
Home safe lighting37
HomeLink®192 -194
Hood - opening158
HU -650 - overview177
HU -850 - overview178
I
Ignition switch36
Immobilizer (start inhibitor)80, 91
Indicator lights28, 29
Inflatable curtain (VIC)13
Inspecting SRS system components14
Instrument panel27
Instrument panel lighting35
Instruments26
Integrated booster cushion19
Interior Air Quality system53
Interior features - overview24
Interior lighting77
ISOFIX child seat anchors22
J
Jack75
, 132
Jump starting109
K
Key - removing from ignition switch91
Keyless entry system81, 82
Keyless entry system - replacing batteries82
Keylock91
Keys80
Kickdown95, 96
L
Label information166
ProCarManuals.com
Page 132 of 138
Parking lights35
Passenger's seat backrest - folding60
Polishing150
Power moonroof44
Power seats58, 59
Power steering - speed sensitive101
Power steering fluid161
Power windows42
On Call Roadside Assistance183
R
R-models, checking oil level160
Radio175
Rain sensor - windshield wipers38
Reading lights - front/rear77
Rear fog light29, 35
Rear park assist87, 100
Rear reading lights77
Rear seat backrest69
Rear window - heated40
Rear-facing auxiliary seat18, 76
Rearview mirror43
Refrigerant49
Refueling90
Remote central locking system and sideview mirrors43
Remote control - keyless entry system81
Remote control - Homelink® Universal Transceiver193
Remote keyless entry system81
Remote keyless entry system - replacing batteries82
Removing the seat cushion69
Replacing bulbs141-147
Replacing fuses136
Replacing the battery162
Replacing wiper blades164
Reporting Safety Defects2
Road assistance173
Roadholding101
Roadside Assistance173
Roof load - maximum168
Roof racks103
Run flat tires125
S
Safety Defects - reporting2
Safety locks - child86
Seat belt reminder3
ProCarManuals.com
