2006 TOYOTA xA lock

[x] Cancel search: lock

Page 97 of 244

TOYOTA xA 2006  Owners Manual (in English) 89
NOTICE
Do not remove the thermostat in
the engine cooling system as this
may cause the engine to overheat.
The thermostat is designed to con-
trol the flow of coolant to keep the
temperature of th

Page 100 of 244

TOYOTA xA 2006  Owners Manual (in English) 92
“START”—Starter motor on. The key
will return to the “ON” position when
released.
For starting tips, see page 146.
“ON”—Engine on and all accessories
on.
This is  the normal driving

Page 101 of 244

TOYOTA xA 2006  Owners Manual (in English) 93
Automatic transmission
Your automatic transmission has a shift
lock system to minimize the possibility of
incorrect operation. This means you can
only move out of  “P” position when the
brake p

Page 104 of 244

TOYOTA xA 2006  Owners Manual (in English) 96
(i) If you cannot move the selector le-ver out of “P” position
If you cannot shift the selector lever from
“P” position even though the brake pedal
is depressed, use the shift lock override

Page 105 of 244

TOYOTA xA 2006  Owners Manual (in English) 97
Maximum allowable speeds
To get on a highway or to pass slower
traffic, maximum acceleration may  be nec-
essary. Make sure you observe the follow-
ing maximum allowable speeds  in each
gear:gear k

Page 111 of 244

TOYOTA xA 2006  Owners Manual (in English) 103
Air flow selector settingsOperating tips
To cool off your Scion after it has been
parked in the hot  sun, drive with the
windows open for a few minutes. This
vents the hot air, allowing the air
c

Page 117 of 244

TOYOTA xA 2006  Owners Manual (in English) 109
OPERATION OF INSTRUMENTS AND
CONTROLS
Other equipment
Clock11 0
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
 . . . . . . . . . . . . . . . . . 
Cigarette lighter and

Page 118 of 244

TOYOTA xA 2006  Owners Manual (in English) 11 0
Clock
Reset knob
To reset the hour: Turn the knob counter-
clockwise.
To reset the minutes: Turn the knob clock-
wise.
The key must be in the “ON” position.
If the electrical power  source ha