2006 TOYOTA SIENNA display

[x] Cancel search: display

Page 346 of 518

TOYOTA SIENNA 2006 XL20 / 2.G Owners Manual 06 SIENNA_U (L/O 0603)
338
2006 SIENNA from March ‘06 Prod. (OM45443U)
Perform circling calibration just after
you have purchased your Toyota. And
then always perform circling calibration
after the

Page 356 of 518

TOYOTA SIENNA 2006 XL20 / 2.G Owners Manual 06 SIENNA_U (L/O 0603)
348
2006 SIENNA from March ‘06 Prod. (OM45443U)
The system may not detect  the follow-
ing.
Thin objects such as a wire or rope
Objects with a surface area too small
to refl

Page 357 of 518

TOYOTA SIENNA 2006 XL20 / 2.G Owners Manual 06 SIENNA_U (L/O 0603)
349
2006 SIENNA from March ‘06 Prod. (OM45443U)
If the back of the vehicle is hit, the
position and mounting angle of the
camera may change. Be sure to
have the camera’s po

Page 358 of 518

TOYOTA SIENNA 2006 XL20 / 2.G Owners Manual 06 SIENNA_U (L/O 0603)
350
2006 SIENNA from March ‘06 Prod. (OM45443U)
On screenCorners of bumper
Check surroundings for safety.
The area detected by the camera is
limited. The camera does not dete

Page 510 of 518

TOYOTA SIENNA 2006 XL20 / 2.G Owners Manual 06 SIENNA_U (L/O 0603)
502
2006 SIENNA from March ‘06 Prod. (OM45443U)
Instrument panel (driver’s side)
Fuses (type A)1. ETCS 10 A:  Multiport fuel injection
system/s equential multiport fuel inje

Page 511 of 518

TOYOTA SIENNA 2006 XL20 / 2.G Owners Manual 06 SIENNA_U (L/O 0603)
503
2006 SIENNA from March ‘06 Prod. (OM45443U)
28. ECU ACC 7.5 A: Shift lock control
system, air c onditioning system, power
rear view mirror control
29. GAUGE2 7.5 A:  Meter
Page:   < prev 1-10 ... 33-40 41-48 49-56 57-64 65-72