335
2. Left hand headlight and right handhead light (high beam):
Turn the bulb base counterclockwise
to the front of the vehicle.
Right hand headlight (low beam):
Turn the bulb base clockwise to the
front of the vehicle.3. Pull the bulb out of the bulb base.
If the connector is tight, wiggle it.4. Left hand headlight and right hand headlight (high beam):
Install the bulb base by turning it
clockwise to the front of the vehicle.
Right hand headlight (low beam):
Install the bulb base by turning it
counterclockwise to the front of the
vehicle.
Left hand haedlight: Remove the
washer inlet.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.
