2006 TOYOTA 4RUNNER Navigation Manual

11 9
Deleting the speed tone individually.
You can delete “1” to “6” of the speed
tone.
If you delete them all at once, all of 6 numbers
are deleted.
1. Touch “Delete” of “Speed Tone”.
2. Touch the touchscreen button you
want to delete.
3. Touch “YES”.
Deleting all the speed tone
1. Touch “Delete All” of “Speed Tone”.
2. Touch “YES”.

120
(iii) Setting the volume
1. Touch “Volume” to display the “Vol-
ume Setting” screen.
2. Touch “” or “+” to adjust the “Voice
Volume” or “Ring Volume”.
Voice Volume Adjusting the other party’s
. .
voice.
Ring Volume Adjusting the ring volume. . . .
Automatic volume settings for high
speed
You can set the volume one step up when
the speed is over 80 km/h. (When it is un-
der 70 km/h, previous volume is back.)
Each time you touch “Adaptive Volume
Control” , you can switch on or off.Initializing the settings
You can initialize the settings.
Touch “Default”.
Touch “YES”.

121
(iv) Setting the screen
1. Touch
“Screen” to display the “Screen
Settings” screen.
2. Do the detail settings of the screen and
touch “OK”.
Receiving Call Display
You can select the method of the receiving
call display.
Touch “Full” or “Icon”.
Full mode When a call is received, the
. . . . .
Hands −free screen is
displayed and you can
operate it on the screen.
Icon mode The message is displayed . . . . .
on the upper side of the
screen. You can only
operate the steering
switch.
Auto answer
When a call is received, the display auto-
matically changes to the talking screen
and you can start to talk on the phone
(without touching any switch) after the
preset time.
Touch “On” of “Auto Answer” and “” or
“+” to adjust the waiting time of auto an-
swer within 1 60 seconds.

122
The Bluetooth connection status at
startup
When the ignition switch is set at ACC or
ON and the Bluetooth is automatically
connected, the connection check is dis-
played.
Touch “On” or “Off” of “Show Bluetooth
connection status at start up”.
Initializing the settings
You can initialize the settings.
Touch “Default”.
Touch “YES”. (v) Setting the phone book
You can register phone numbers in the
phone book.
Touch “Phone Book” to display the
“Phone Book Management” screen.
You can do the detail settings of phone
book.

123
Transferring a telephone number
You can transfer the telephone numbers in
your Bluetooth phone to the system. Up to
1000 person’s data (up to 2 numbers a per-
son) can be registered in the phone book.
Transfer it while the engine is running.
1. Touch “Transfer Data” to display “Se-
lect Group” screen.
2. Select the group you want to transfer
to.
3. Touch “Overwrite” or “Add to”.
4. Transfer the phone book data to the
system using the Bluetooth phone.
This screen appears while transferring. To
cancel it, touch “Cancel” . If the transferring
is interrupted on the way , the phone book data
transferred until then can be memorized in the
system.
5. When this screen is displayed, the
transfer is completed.

124
When this screen is displayed, try the
transfer operation again.
Registering the phone book data
You can register the phone book data.
1. Touch “Register” of “Phone Book”.
2. Touch the desired touchscreen but-
ton to edit the phone book.
3. When you complete the edit, touch
“OK”.

125
Editing the name
When you don’t input the name, the num-
ber is displayed.
1. Touch “Name”.
2. Use the software keyboard to input the
name.
Editing the phone number
You can register the phone number in
“TEL1” and “TEL 2” separately. Up to 2
numbers a person can be registered.
1. Touch “TEL 1” or “TEL 2”.
2. Input the number and touch “OK”.
3. Select the desired icon.

126
Selecting the group
You can set a group for a contact (for ex-
ample: “Family”, “Friends”, “Office”...). It
will then be easier for you to find this con-
tact when needed, by using the group dis-
play.
You can select “No group” or “Group 01”
to “Group 19”.
“No group” is displayed if you don’t set the
group.
1. Touch “Group”.
2. Select the desired group.
Setting the voice recognition
You can set the voice recognition. Up to 20
numbers can be registered for the voice
recognition.
1. Touch “Voice Rec.”.
2. Select the phone number and touch
“REC” to record a voicetag.